Jenn-Air UXT2030AAW User manual

Height :
Width:
Dimension from top to center line
of back power supply hole:
Dimension from back to center
line of top power supply hole:
Dimension from hood center line to
center line of power supply holes:
View is looking at the Rear Top of the Unit
(not to scale)
7 1/2"
3/4"
2"
17 1/2"
6"
30"
7 1/2"
3/4"
2"
17 1/2"
6"
30"
Center Line
of Hood
Knock-outs for
wiring connection
12"
Bottom Depth:
Top Depth: 12"
5 3/4"
5 3/4"
Dimension from back to
centerline of exhaust outlet:
• Electrical Requirements: 120V, 60Hz, 2.2amps.
• For most efficient operation, the top of the hood
should be 66" from the floor.
• Unit can be vented vertically by 6" round duct (or
larger round duct).
• Vertical 6" round rating discharge is 190CFM.
www.dexpress.com DIMENSION EXPRESS Fax on Demand [phone]
• Dimensions (Actual Size) •
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at [phone] •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
Hoods:
UXT2030AAB, UXT2030AAW, UXT2030AAS and
UXT2030AAQ
• Product Model Number (s): •
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter-
mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2002.
This Data Sheet Includes Information On
BN110 • A217 • • 032603 • 95657 • 43057
• Additional Information •
217
Jenn-Air