Jensen MEDIA LINK 7100 Twin User manual

7100 Twin
User Manual

Safety Precautions
Important Safety Instructions
Panel Illustration
Remote Control
Introduction
2
3
5
7
Connecting to a TV set
Connections
9
Basic Operation
Basic Playback
Modes and Features Setup
Remote Control Operation
MP3 and MPEG4 Playback
Advanced Features
10
19
Others
27
Troubleshooting
28
29
Specifications
11
1
Content
Accessories
8
ML7100 Twin

THE EXCLAMATION POINT WITHIN AN
EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT
OPERATING A ND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE
MANUAL ACCOMPANYING THE UNIT.
WARNING:
CAUTION:
CAUTION:
CAUTION:
WARNING:
FCC REGULATIONS STATE THAT ANY CHANGE
OR MODIFICATION TO THE EQUIPMENT, NOT
EXPRESSLY APPROVED BY MA KER OR ITS
AUTHORIZED PARTIES, COULD VOID USER'S
AUTHORITY TO OPERATE THIS EQUIPMENT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Safety Precautions Introduction
THE DVD VIDEO PLAYER IS A CLASS 1 LASER
PRODUCT. USE OF CONTROLS OR ADJUST-
MENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD
VIDEO PLAYER IS HARMFUL TO THE EYES, DO
NOT ATTEMPT TO DISASSEMBLE THE
CABINET.
REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
THE UNIT EMPLOYS A LASER SYSTEM. TO EN-
SURE THE PROPER USE OF THE UNIT, READ
THIS MANUAL CAREFULLY AND KEEP IT FOR
FUTURE REFERENCE.
IF THE UNIT REQUIRES SERVICING, CONTACT
THE SELLER OR SEE "TROUBLESHOOTING".
TO PREVENT DIRECT EXPOSURE TO THE
LASER RADIATION, DO NOT OPEN THE
CABINET. VISIBLE LASER MAY RADIATE
WHEN THE CABINET IS OPENED OR THE
INTERLOCKS ARE DEFEATED. DO NOT
STARE INTO THE LASER BEAMS.
THE LIGHTNING FLASH WITH ARRO-
WHEAD SYMBOL WITHIN AN EQUIL-
ATERAL TRIANGLE IS INTENDED TO
ALERT THE USER TO THE PRESEN-
CE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE UNIT'S CABI-
NET THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK
OF ELECTRIC SHOCK TO PERSONS.
TO PREVENT FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
NEVER ATTEMPT TO OPEN THE CABINET,
DANGEROUS HIGH VOLTAGES ARE PRESENTED
IN THE UNIT. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THE APPARATUS SHALL NOT BE EXPOSED TO
WATER AND NO OBJECTS FILLED WITH LIQUID
SUCH AS VASES SHALL BE PLACED ON THE
APPARATUS.
WARNING:
WHEN THE MACHINE IS IN OPERATION, THE
RADIATORS ON THE BOTTOM MAY BE HOT.
PLEASE AVOID DIRECT CONTACT WITH YOUR
BARE SKIN. DIRECT CONTACT FOR
EXTENDED PERIOD OF TIME MAY CAUSE
INJURY. DO NOT PLACE THE MACHINE ON
HEAT SENSITIVE PLACE.
CAUTION:
THE MAINS PLUG IS USED AS THE DISCONNECT
DEVICE, THE DISCONNECT DEVICE SHALL RE-
MAIN READILY OPERABLE.
CAUTION:
ALWAYS REMEMBER TO REMOVE THE PLUG
FROM THE MAINS SOCKET BEFORE DISCONN-
ECTING THE POWER LEAD FROM THE BACK
OF THE UNIT.
2
ML7100 Twin

Important Safety Instructions Introduction
1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions
The safety and operating instructions should be
retained for future reference.
3. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
4. Follow Instructions
All operating instructions should be followed.
5. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
6. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. Water and Moisture
Do not use this product near water for example, near
a bathtub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8. Accessories
Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage
to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the product. Any mounting of the product
should follow the manufacturer's instructions , and
should use a mounting accessory recommended by the
manufacturer.
9. Portable Cart Warning
A product and cart combination should be moved with
care. Quick stop, excessive force, and uneven surface
may cause the product and cart combination to overturn.
10. Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug , or other similar surface.
This product should not be placed in a built - in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.
11. Power Sources
This product should be operated only from the type of
power source indicated on the marking label. If you
are not sure of the type of power supply to your home,
consult your product dealer or local power company.
For products intended to operate from battery power
or other sources, refer to the operating instructions.
12. Grounding or Polarization
This product may be equipped with a polarized
alternating current line plug ( a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet , try
reversing the plug . If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
(Symbol provided by RETAC)
3
ML7100 Twin

Introduction
Important Safety Instructions
18. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
19. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
20. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
21. Heat
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products ( including amplifiers ) that produce
heat.
13. Power Lines
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system,extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
14. Overloading
Do not overload wall outlets , extension cords , or
integral convenience receptacles, as this can result in
a risk of fire or electric shock.
15. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the product.
16. Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards . Refer all
servicing to qualified service personnel.
17. Damage Requiring Service
Unplug this product from t he wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A)When the power-supply cord or plug is damaged,
B)If liquid has been spilled, or objects have fallen
into the product,
C)If the product has been exposed to rain or water,
D)If the product does not operate normally by
following the operating instructions . Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often require
extensive work by a qualified technician to restore
the product to its normal operation,
E)If the product has been dropped or damaged in
any way.
F)When the product exhibits a distinct change in
performance this indicates a need for service.
4
ML7100 Twin

5
Panel Illustration
Introduction
1
2
3
4
POWER SWITCH
DC 9-12V INPUT JACK
LCD DISPLAY
SPEAKER LEFT
5
6
7
8
MODE BUTTON
PLAY/PAUSE BUTTON
STOP BUTTON
SPEAKER RIGHT
9
10
11
12
FWD BUTTON
REV BUTTON
NEXT BUTTON
PREV BUTTON
13
14
15
16 EARPHONE JACK
USB SOCKET
SD/MMC/MS CARD SOCKET
AV OUT JACK
14
DC IN 9-12V
AV OUT
MODE
SD/MMC/MS
ON OFF
POWER
12
567
9
10
11
12
13
15
16
3
4 8
1
2
3
4
5
EARPHONE JACK
AV IN JACK
DC OUT JACK
7
8
9
FUNCTION BUTTON
VOLUME- BUTTON
VOLUME+ BUTTON
DC IN JACK
POWER SWITCH
SPEAKER LEFT
6
11
10 SPEAKER RIGHT
LCD SCREEN
1
2
3
4
5
OFF ON
POWER
DC OUT DC IN
AV IN
8
7 8 9
11
FUNCTION
DIGITALVIDEO
DIGITALAUDIO
VOL
610
1.Master
2.Slave
ML7100 Twin

Connecting cables / Using backwire
Introduction
6
ML7100 Twin
AV OUT SD/MMC/MS
OFF ON
POWER
DC OUT DC IN
AV IN
Slave
Master
12V / 220V
White
Yellow
Yellow
White
AV OU T
SD/MMC/MS
Use the backwire/support when
using ML7100 on the table.

Introduction
Remote Control
Using the Remote Control
Point the remote control at the remote sensor in order for the player to function correctly. The remote will
function to approximately 21' from the remote sensor at an angle of approximately 30 each direction.
Note: Directing the remote sensor toward any light source, such as direct sunlight, may cause the unit to
malfunction. Do not spill water or put wet items on the remote control. Never disassemble remote control.
BATTERIES
INCORRECT USE OF BATTERIES MAY CAUSE THEM TO LEAK, CORRODE OR EXPLODE.
Be sure to place the batteries in the correct direction.
It is dangerous to charge/heat/open or short-circuit the batteries.
Do not leave dead or expired batteries or mix old/new batteries.
When not using the remote control for a long duration of time, remove the batteries. When operating
range becomes reduced, replace all batteries with new, fresh ones.
If leakage from the battery occurs, wipe the battery liquid from the battery compartment, then replace.
PROGRAM
DISPLAY
SUBTITLE
ANGLE
UP
LEFT
ENTER
DOWN
STOP
REV
FWD
MUTE
SLOW
PLAY/PAUSE
ZOOM
NUMBER KEY SELECT
TIME
RIGHT
CLEAR
A-B REPEAT
REPEAT
VOLUME +
VOLUME -
NEXT
PREV
30
29
28
26
27
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
AUDIO
TITLE
MENU/PBC
SETUP
MODE
1
2
3
4
5
6
9
7
8
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
MUTE DISPLAY SLOW MODE
SUB
TITLE
ANGLE
123
456
789
0 10+
AUDIO
TIME
TITLE
MENU
PBC
A-B
REPEAT
CLEAR
ZOOM
ENTER PROG
VOL-
SETUP
VOL+
7
ML7100 Twin

2 xEarphone
AV cable + AV/Power cable
Introduction
Accessories
2xBackwire
ML7100 Twin
8
2 x Strap

AV OUT SD/MMC/MS
Connecting to a TV Set Connections
VIDEO IN
AUDIO IN
WHITERED YELLOW
9
ML7100 Twin

Basic Playback
Basic Operation
Preparation before playing:
STEP 2 - Open the front panel ,
place the disc on the tray with
the label side up. Then close
the disc.
MODE
PORTABLEDVD/TV/USB/CARD READER/DIVX PLAYER
STEP 1 - Press POWER to start
the player. The startscreen appears
on the LCD screen.
STEP 3 - Press the PLAY button
on the front panel or remote con-
trol. The player will automatical-
ly read and identify the disc, and
begin playback.
10
ML7100 Twin

Modes and Features Setup Advanced Features
Press the SETUP button on the remote controller, system SETUP MENU (main)
will be displayed.
1. After accessing the SETUP Menu, press the direction buttons for up and down
movement to select an item desired, then press the ENTER button to confirm your
entry and move to the sub-menu. Use the left and right direction buttons to move
the pointer, and the up and down direction buttons to select the option desired.
Also, press the ENTER button to confirm your selection. Now, setup of this current
function is completed.
2. To end the setup, press the SETUP button again. In the SETUP MENU, you
may choose any of the following options as you like.
1.1 GENERAL SETUP
This option is used to set up TV screen format, video functions and DVD functions.
With options of “TV Display” “Angle Mark” “OSD Language” “Closed Captions”
“Screen saver” “ Last Memory”
Go To General Setup Page
.. General Setup Page ..
1.DVD menu setting
1.1.1 TV DISPLAY
Follow the operating instructions stated in "DVD MENU SETUP" in combination with the
desired option in the following figure.
Wide
On
ENG
Off
On
Off
TV Display
Angle Mark
OSD Language
Closed Captions
Screen saver
Last Memory
.. General Setup Page ..
Set TV Display Mode
Wide
On
ENG
Off
On
Off
4:3 PANSCAN
4:3 LETTERBOX
16:9 WIDE
TV Display
Angle Mark
OSD Language
Closed Captions
Screen saver
Last Memory
11
ML7100 Twin

Modes and Features Setup Advanced Features
Note:
1). Irrespective of what screen format you have selected, if your screen displays in 4:3 format,
the picture will be shown in that format anyway.
2). For DVDs, the screen format is convertible.
3). If your screen displays in 4:3 format, when a DVD with 16:9 display format is used, the
picture will be flattened.
1.1.2 ANGLE MARK
When a DVD providing multiple angles is used, the user may select a particular shooting angle.
Follow the operating instructions stated in "DVD MENU SETUP" in combination with the
desired option in the following figure.
1.1.3. OSD LANGUAGE
The user may use this item to set the language of the setup menu and screen display to
English, Norwegian, Swedish or Danish.
Follow the operating instructions stated in "DVD MENU SETUP" in combination with the
desired option in the following figure.
.. General Setup Page ..
Set Angle Mark
PS
On
ENG
Off
On
Off
On
Off
TV Display
Angle Mark
OSD Language
Closed Captions
Screen saver
Last Memory
.. General Setup Page ..
Set OSD Language
PS
On
ENG
Off
On
Off
TV Display
Angle Mark
OSD Language
Closed Captions
Screen saver
Last Memory
English
12
Norwegian
ML7100 Twin

Advanced Features
Modes and Features Setup
1.1.5. SCREEN SAVER
Select in "General setup" menu to get Screen protection Setting according to following figure.
1.1.6. LAST MEMORY
According to following figure to get selected setting.
.. General Setup Page ..
Scaeen Saver
PS
On
ENG
Off
On
Off
TV Display
Angle Mark
OSD Language
Closed Captions
Screen saver
Last Memory
On
Off
1.2. AUDIO SETUP
Audio setup includes Dolby Digital and Downmix.
.. General Setup Page ..
PS
On
ENG
Off
On
Off
TV Display
Angle Mark
OSD Language
Closed Captions
Screen saver
Last Memory On
Off
Set Last Memory state
.. Audio Setup Page ..
GoTo Audio Setup Page
Dolby Digital
Downmix
1.1.4. CLOSED CAPTIONS
The user may use this item to enable or disable the closed caption function.
.. General Setup Page ..
Scaeen Saver
PS
On
ENG
Off
On
Off
TV Display
Angle Mark
OSD Language
Closed Captions
Screen saver
Last Memory
On
Off
13
ML7100 Twin

Introduction
Modes and Features Setup
1.2.1 DOLBY DIGITAL SETUP
1.2.1.1 DUAL MONO SETUP
.. Dolby Digital Setup ..
Dual Mono
Dynamic
Stereo
L - Mono
R - Mono
Mix - Mono
Dual Mono (1 + 1) Setup
STR
1.2.1.2 DYNAMIC RANGE COMPRESS
Follow the operationinstructions stated in "DVD MENU SETUP" in combination with
desired option in the following figure.
.. Dolby Digital Setup ..
Dual Mono
Dynamic
FULL
3/4
1/2
1/4
OFF
Set DRC Off
STR
1.2.2 DOWNMIX
nd
.. Audio Setup Page ..
Set Downmix Mode
LT/RT
Stereo
Dolby Digital Setup
Downmix
14
ML7100 Twin
Follow the operation instructions stated in "DVD MENU SETUP" in combination with desired
option in the following figure.
If you have Dolby digital output in your amplifier/decoder you may select Stereo or Left, right
and mixed sound accordingly.
Dolby digital setup includes Dual Mono and Dynamic range compress.
This setting is suitable for films. If you only need two channels to enjoy music, it's
recommended to select the second option.

.. Panel Quality Setup ..
Sharpness
Brightness
Contrast
Hue
Saturation
Sharpness
Mid High
00 Medium
00 Low
00
00
.. Video Setup Page ..
Panel Quality
DivX VOD
Get DivX Registration Code
OK
1.3 1 PANEL QUALITY
1.3 2 DIVX VOD
Modes and Features Setup Advanced Features
1.3 VIDEO SETUP
Video setup includes: Panel Quality, DivX VOD.
.. Video Setup Page ..
Panel Quality
Divx VOD
Go To Video Setup Page
15
ML7100 Twin
To check the DivX registration code of your ML7100.
DivX VOD files are downloaded after paying a rental from certain commercial websites,
prior to downloading a VOD, you need to input the registration number of the ML7100 on
the purchase form on the site.
Following the operation to adjust Sharpness, Brightness, Contrast, Hue or Saturation to attain
the best panel picture.

Modes and Features Setup Advanced Features
1.4 PREFERENCE SETUP
During stop mode, press the SETUP button to access the INITIAL SETUP menu,
which includes items of TV TYPE, AUDIO, SUBTITLE, DISC MENU, PARENTAL,
and DEFAULT.
Preset values are essential to a DVD player. The user may change these items as desired.
1.4.1 TV TYPE
Follow the operation instructions stated in "DVD MENU SETUP" in combination with
desired option in the following figure.
This product supports various system outputs including NTSC, PAL and Multi.
1 )If your TV is set to the wrong system, the screen will blink, and become colorless.
In this case, press the N/P button on the Remote Control to return to normal screen,
Always remember to choose the correct system, NTSC or PAL.
2)For more information of output format, refer to the instructions or your TV set.
.. Preference Page ..
TV Type
Audio
Subtitle
Disc Menu
Parental
Default
PAL
ENG
ENG
ENG
PAL
MULTI
NTSC
SetTVStandard
1.4.2AUDIO
Follow the operating instructions stated in "DVD MENU SETUP" in combination with
the desired option in the following figure.
ML7100 provides English, Norwegian, Swedish and Danish built-in disc dubbing language option.
.. Preference Page ..
TV Type
Audio
Subtitle
Disc Menu
Parental
Default
PAL
ENG
ENG
ENG
English
Norwegian
Swedish
Danish
Preferred Audio Language
.. Preference Page ..
TV Type
Audio
Subtitle
Disc Menu
Parental
Default
Go To Preference Page
PAL
ENG
ENG
ENG
16
ML7100 Twin
Finnish

1.4.3 SUBTITLE
This machine provides English, Norwegian, Swedish and Danish built-in subtitle languages.
When a DVD is played, the user may hide the subtitle or choose any of them as the preset
subtitle language.
Follow the operating instructions stated in "DVD MENU SETUP" in combination with
the desired option in the following figure.
1.4.4 DISC MENU LANGUAGE
This machine provides English, Norwegian, Swedish and Danish menu language option..
Follow the operating instructions stated in "DVD MENU SETUP" in combination with
the desired option in the following figure.
Modes and Features Setup Advanced Features
.. Preference Page ..
TV Type
Audio
Subtitle
Disc Menu
Parental
Default
PAL
ENG
ENG
ENG
Preferred Subtitle Language
.. Preference Page ..
TV Type
Audio
Subtitle
Disc Menu
Parental
Default
PAL
ENG
ENG
ENG
Preferred Menu Language
1.4.5 PARENTAL
Follow the operating instructions stated in "DVD MENU SETUP" in combination with
the desired option in the following figure.
For a film to be restricted for children, the film class may be set according to label
marking on the disc.
.. Preference Page ..
TV Type
Audio
Subtitle
Disc Menu
Parental
Default
PAL
ENG
ENG
ENG
Set Parental Control
1 KID SAFE
2G
3PG
4PG13
5PGR
6R
7 NC17
8 ADULT
English
Norwegian
Swedish
Danish
English
Norwegian
Swedish
Danish
17
ML7100 Twin
Finnish
Finnish

Modes and Features Setup Advanced Features
1.5.2 PASSWORD
.. Preference Page ..
TV Type
Audio
Subtitle
Disc Menu
Parental
Default
PAL
ENG
ENG
ENG
Reset
Load Factory Setting
1.4.6 DEFAULTS
This option will resume the original settings of this machine.
Follow the operating instructions stated in "DVD MENU SETUP" in combination with
the desired option in the following figure
1.5 PASSWORD SETUP
1.5.1 PASSWORD MODE
.. Password Setup Page ..
Password Mode
Password
Off On
Off
Password Mode
.. Password Setup Page ..
Password Mode
Password
Off
Change
Change Password
18
ML7100 Twin
Password setup includes Password Mode and Edit password.
With this option you can change the password of your ML7100.
The default password is "888888"
Set password mode on / off (default is OFF)

Note: 1. During CD playback, points A and B must be within
the same track. During DVD playback, points A and B can be
selected from different chapters.
2. This function is subject to the disc.
During playback, press to select point A.A-B
Press it again to select point B. The player will repeat the section
from A to B automatically.
Press third time to cancel A-B repeat and clear points A and B.A-B
0-10+ keys These keys are used to input the time, as well as
title, chapter and track numbers.
When a numeric item is displayed on the screen,
press the 0-10+ keys to select the desired entry,
and press ENTER to confirm.
Remote Control Operation Advanced Features
Note: Tf
playback is stopped about 5 minutes(when Screen
Saver is set to on).
he screen saver will automatically turn on i
Press during playback to stop and hold playback.STOP( )
Press to resume playback from the pointPLAY/PAUSE( )
you pressed STOP.
A-B
19
ML7100 Twin