Jensen AL3000DGv3 User manual

This equipment may be operated in all EU and EFTA countries: AT, BE, BG, CY, CZ, DK, EE, FI,
FR, DE, GR, HU, IS, IE, IT, LV,LI, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, TR, GB
PRODUCT USAGE RESTRICTIONS: This product is intended for indoor use only.
Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive):
Hereby, Jensen Scandinavia AS, declares that this wireless router is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of confirmity may be consulted at www.jensenscandinavia.com/rtte/
WPS LED
WPS status LED.
WPS LED is flashing when
setting up a WPS connection.
Internet 1 2 3 4
Installation Guide
Power connector
5GHz LED
LED that show status
for the 5GHz network.
The LED’s will flash when
active.
Internet port
Please connect your
broadband modem
to the internet port. Reset / WPS*
Reset: Hold for about 7 seconds to
reset the router to factory default.
WPS: Hold for about to 1-2 seconds
to initiate WPS connection.
* WPS is disabled as default
and needed to be activated in
router GUI (http://192.168.38.1) before
use.
Network ports
Ports for connecting network
devices by cable, such as computer,
TV, Media Server, Network printer,
VOIP adapter etc.
2.4GHz LED
LED that show status
for the 2.4GHz network.
The LED will flash when
active.
Network ports LED
Show status for devices
that are connected to
the router by cable.
Internet LED
LED that show status
for the Internet port.
The LED will flash when active.
USB LED
Indicates if the USB port is correctly
connected.
USB port
USB port for connecting
a printer or USB hard disk drive.
Power LED
Model: AL3000DGv3

Network cable
POWER OUTLET
Power cablel
INTERNET MODEM
1
CONNECTING
A) Connect the power adapter
to the router and to a power outlet.
B) Connect the enclosed network cable from
your internet modem to the blue internet
port on the router.
If your internet is delivered through
cable-tv you should also ensure the
following:
a) Make sure there is no devices
connected to your modem.
b) Reset the modem by doing a power off/on.
c) Wait further 2 minutes
d) Continue with step 2
Power DS US LAN
JENSEN ROUTER
AirLink12D5FB
AirLink5GHz12D5FB
Installation Guide
2
CONNECT TO WIRELESS NETWORK
Your new router has two wireless networks. One for 2.4GHz and one for 5GHz.
The router is pre-configured with network names and passwords. These are stated on the top of your router and the underside sticker.
Search for the wireless networks with your device and connect.
PC Mac iPhone/iPad Android
1
Problem
If you need help with the setup you can call our
free phone support. When calling you will be asked to
enter an support-id.
This is stated on top and underside sticker.
or send an email to
[e-mail]
Norway
Sweden
Denmark
Finland
FINISH
Your wireless device is now connected to internet and ready for use.
No access to internet Log into the router menu by entering http://192.168.38.1 in your web browser.
Username = admin og password = 1234
Select EASY SETUP from main menu and follow the setup wizard
Change network name Log into the router menu by entering http://192.168.38.1 in your web browser.
Username = admin og password = 1234
Select WIRELESS from main menu
Change encryption key Log into the router menu by entering http://192.168.38.1 in your web browser.
Username = admin og password = 1234
Select WIRELESS from main menu
Change channel Log into the router menu by entering http://192.168.38.1 in your web browser.
Username = admin og password = 1234
Select WIRELESS from main menu. Select the channel you want to use.
Solution Customer support
(Delivered by your internet provider)
¢
¢
¢
¢
Model: AL3000DGv3
22 32 30 76
08 38 30 00
70 70 21 22
09 455 21 22