Jensen VX3020 User manual

VX3020
6.2
Double
DIN
Multimedia
Receiver
DVD/Built-in
Bluetooth/Compatible
with
iPhone/
Compatible
with
iPod/USB/Aux
In
Operating
Instructions
1
1!:1\ . .
..
\U40Wx4

"'i ..
~
..
..
•t
.
..
'
itiirl
.···
..
·
..
~~
·
~
..
·-
......
•·
·
&"
···
...
·
··
.
W"l
..
~-~
·
·
.
·
-
.
r
·;
~
~·--·
::
!
.
"JJ.!L_
·
~
2

VX3020
Thank
you
for choosing a Jensen product.
We
hope you will find the
instructions
in
this owner's manual clear
and
easy to follow. If you take
a few minutes to look through
it,
you'll learn how
to
use all the features
of your new Jensen VX3020 Mobile Multimedia Receiver for maximum
enjoyment.
iPod®
Control"iPod"
is
atrademark
of
Apple Computer,
Inc.,
registered in the
U.S.
and other countries.
Bluetooth®
is
atrade mark
of
Bluetooth Special Interest Group
(SIG)
Inc.
CONTENTS
FCC
STATEMENT
SAFETY
PRECAUTIONS
FEATURES
FRONT
PANEL
CONTROLS
AND
INDICATORS
REMOTE
CONTROL
OPERATION
REMOTE
CONTROL
BATTERY
REPLACEMENT
QUICK
START
SYSTEM
SETTINGS
RADIO
TUNER
OPERATION
PLAYBACK
OF
AUDIO
FILES
EQUALIZER
CONTROLS
MENU
iPod®/iPhone®
CONTROLS
BLUETOOTH
OPERATION
AV-In1/AV-In2
CONTROLS
STEERING
WHEEL
CONTROL
(SWC)
OPERATION
REAR
CAMERA
OPERATION
TROUBLESHOOTING
SPECIFICATIONS
CARE
AND
MAINTENANCE
NOTES
VX3020 COMMON
REPLACEMENT
PARTS
4
5
6
8
10
14
15
17
22
24
30
32
34
39
40
41
42
44
46
47
(Back
Cover)
3

FCC
Statement
1.
This device complies
with
Part
15
of
the
FCC
Rules.
Operation
is
subject
to
the following
two
conditions:
(1)
This device may
not
cause
harmful interference.
VX3020
(2)
This device must accept any interference received, including interference
that
may
cause undesired operation.
2.
Changes
or
modifications
not
expressly approved by the party responsible
for
com-
pliance could void the user's authority
to
operate the equipment.
NOTE:
This
equipment
has been tested
and
found
to
comply
with
the limits
for
a Class 8
digital
device,
pursuant
to
Part
15
of
the
FCC
Rules.
These
limits aredesigned
to
provide
reasonable
protection
against
harmful
interference in a residential
installation.
This
equipment
generates
uses
and
can
radiate radio frequency energy and,
if
not
installed and used in accordance
with
the
instructions, may
cause
harmful interference
to
radio communications. However, there
is
no guarantee that interference will
not
occur in a particular installation. Ifthis
equipment
does
cause
harmful interference
to
radio
or
television reception, which
can
be determined by turning the
equipment
off
and on,
the
user
is
encouraged
to
try
to
correct the interference by one
or
more
of
the
following measures:
·Reorient
or relocate the receiving antenna.
• Increase the separation between the
equipment
and receiver.
·Connect
the
equipment into
an
outlet
on a circuit differentfrom that
to
which
the
receiver
is
connected.
·Consult
the
dealer or
an
experienced radio!TV technician for help.
FCC
Radiation Exposure
Statement
This
equipment
complies with
FCC
radiation exposure limits set forth for
an
uncontrolled environment.This
equipment
should be installed and operated
with
minimum
distance
of
20
centimeters between the radiator and your body.
This unit supports most iPod/iPhone models.
I
Made for
~
iPod DiPhone 1
"Made
for
iPod;' and "Made
for
iPhone" mean
that
an
electronic accessory
has
been designed
to
connect specifically
to
iPod, or iPhone, respectively, and
has
been certified by the developer
to
meet
Apple performance standards.
Apple
is
not
responsible for the operation
of
this device or its compliance with safety and regulatory
standards. Please
note
that
the
use
of
this accessory
with
iPod or iPhone may
affect
wireless
performance.
iPhone and iPod
are
trademarks
of
Apple
Inc.,
registered in the
U.S.
and other countries.
4

VX3020
Safety Precautions
Please
read
through
these
operating
instructions
so
you will know
how
to
operate
your
model
properly.
After
you've
finished
reading the instructions, keep this manual in a
safe
place for future reference.
Only connect the unitto a 12-volt power supply
with
negative grounding.
Never install this
unit
where
the
operation
&
condition for
safe
driving
is
impaired.
<l
Never use
the
video
display
function
in
the
front
when driving
to
prevent the violation
of
laws & regulations and
also
to
reduce the risk
of
traffic accident except for using rear view video
camera.
Never expose this unit, amplifier, and speakers
to
moisture or water to prevent electric sparks
or fire.
Please
don't
change the fuse on the power cord
without
professional guidance, using improper
fuse may cause damage
to
this
unit
or
even
cause fire.
J
.,..,.N
···
~
·-
·.·
...-jN
····
·
i\'IJ
•.·
·.··.·
·.·
J•..
-
·..
. '"
\··.·.
:
.···
)•
·
..
·.·.
·
.··
.i
.·
i~
.. .
.
··~·.
;·
.·
.
!LJ
_
....
LJJ
!LJ_
....
Please
contact your nearest dealer
if
one
of
the
following symptoms
is
experienced:
(a).
Water or other objects enters the unit.
(b).
There
is
smoke.
(c).
Peculiar smell.
To
ensure
safe
driving, please adjust the volume
to
a safe
and
comfortable
level
in
case
of
emergency situations.
1.)
Never
disassemble
or
adjust
the
unit
without any professional guidance. For details,
please consult any professional car shop
I
dealer for inquiry.
2.) If the front panel or TFT monitor is dirty,
please use a clean silicone cloth and neutral
detergent
to
wipe off the spot. Using a rough
cloth
and
non-neutral
detergent
such
as
alcohol for cleaning may result
in
scratching
or decoloration
to
the monitor.
3.)
If
any abnormal behavior
of
the unit is
found, please refer to trouble shooting guide
of
this manual. If
no
relevant information is
found, please press the [RESET] key on the
front panel
to
resume factory default.
4.)
If you have parked the car
in
hot or cold
weather for a long time, please wait until the
temperature
in
the car becomes normal before
operating the unit.
5.) Using the car heater
in
low temperature
environment may result
in
moisture inside the
unit, DO NOT use the unit
in
this situation.
Eject the disc
and
wipe off the moisture
on
the
disc. If the unit still doesn't work after a few
hours, please contact the service center.
6.) Do not impact the LCD
monitor
which
could cause damage.
7.)
To
prevent damage to the screen, avoid
touching it with sharp objects.
8.)
To
provide a clear
demonstration
and
an
alternative for easy understanding to the
operation of this unit, graphic illustrations are
used. However, some illustrations are different
from the actual
images
displayed
on the
screen.
9.) Operate the unit correctly according to
this manual
to
prevent unnecessary problem.
The guarantee won't
be
valid if the problem
is
caused by inappropriate operation.
5

.
If
···.·
.'
10
.•••
..
::
.
··
.
1
~li
..
..
,
~
....
·*..
•.·.···
W)·
·
:·
,·
1
.
~
.
·
..
~
..
· T'.:
··'
.
,,..
+?JJ
!LJl
'\S
LJ;
!LJl
\!
FEATURES
VX3020
Please read
the
instruction manual for this
product
before using. The
documentation
provided
will
allow
the
user
to
fully enjoy all
the
features
of
your
new
Jensen
VX3020
Mobile
Multimedia
Receiver.
Please
read all
of
the
instructions
before
beginning
the
installation and save this manual
for
future
reference.
We
recommendhaving
your
Jensen
VX3020
installedbyareputableinstallationshop.
DVD
•
Audio
Equalizer
• Next Chapter and Previous Chapter
• Play/Pause
• Track Direct Entry
• Disc Menu
• Selection Repeat I Track Repeat
• Disc Audio
• Disc Language
•
Pic
Control
CD/MP3/WMA
• CO-Text Compatible
•
103
Tag
Compatible
• Directory Search (MP3 I WMA Only)
•
Audible
Forward I Reverse Track Search
• Random, Repeat and
Intra
•
Play,
Pause,
Stop, NextTrack and PreviousTrack
AM-FM
•
USA,
Asia, Japan, Europe,
Eur
LW,
Oirt.
• 30
Station Presets
(18
FM
I
12
AM)
•
Auto
Stereo I
Mono
• Local I Distance
•
Auto
Store
iPod®fiPhone®
6
• iPod®/ iPhone® via
USB
• High Speed Direct Connect Interface
to
Access
iPod®
Playlists, Artists, Albums
and Songs.
• Power ManagementCharges
iPod®
while
Connected

VX3020
Chassis
• 2.0 DIN (Import I ISO-DIN Mountable)
• Fixed Front Panel
• 6.2" High Definition
TFT LCD
• 1,152,000 Sub Pixels (800 x 3 X480)
• Beep Tone Confirmation
(ON-OFF Option)
General
J il:"'l
.. lilil'l·········.· ~~· .... ·~··········.··· iii
~}· ~~~~· ·. ········. , ·.
•:J. ;~_·::
• Built-In Bluetooth® providing Hands-Free operation for safety and convenience
and A2DP for streaming music from your smartphone or other Bluetooth®
device.
• One CompositeVideo
Output for Additional Screens
• Front Panel
AudioNideo Input
• 3 Band Parametric Equalizer- Bass, Mid-Range and Treble
•
Rear Panel AudioNideo RCA Input
• Front, Rear and Sub RCA Line Output- 2VRMS
• Rear Camera Input
• Touch Screen Calibration Mode
• Rotary Encoder Audio Control
REAR CAMERA
The VX3020 is "camera ready:' Before accessing any camera features, you must
purchase and install a rear video camera.
7

VX3020
FRONT PANEL CONTROLS AND INDICATORS
8
-----------110
Bluetoolll
Figure
1.
VX3020 Controls
and
Indicators
Notice:
The graphic
in
this manual is for reference only, and may be different from the actual
unit. Reference to actual unit
is
suggested.

VX3020
1.) DISC
SLOT:
Accepts DVD/CD/MP3
discs.
Ifthe
unit
is
turned on, playback
begins when adisc
is
inserted.
2.)
EJECT
[ • 1
Button:
Press this button to eject a DVD/CD/MP3 disc. Disc
play
is
stopped, the disc is ejected and the unit will change to radio operation.
If the disc
is
not removed from the unit and the button
is
pressed again, the
disc will
be
re-loaded. If the disc
is
not removed from the disc slot within
10
seconds of being ejected, it will
be
automatically reloaded to prevent it from
being accidentally damaged.
3.)
MENU Button: Press the
button
to display the Main Touch Screen Source
Menu. Press this button again to retun to the selected source
4.) ROTARY ENCODER I POWER
ON/OFF:Knob:
Press
Rotary Knob
to
turn the unit
ON.
Rotate the knob
to
adjust the volume from 0
to
50.
Pressing
the
Rotary Knob momentarily will mute and un-mute the audio.
Press
and hold the
knob for 2 seconds to turn the
unit
OFF.
S.)
RESET
Button:
Press
this
button
to
reset
the
system
settings
(except
password and parental lock settings) and
to
correct a system halt or other illegal
operation.
Use
the
tip
of
apen
to
press
the
Reset
button.
6.) USB/AV INTERFACE CONNECTOR COVER:
Covers
the
USB/AV interface
connector.
7
.)
USB
INTERFACE CONNECTOR:
Connect a
USB
device for playback
of
music
/video files
8.)
A/V
INPUT:
Attach acompatible
AN
device.
9.)
IR
REMOTE SENSOR:
Used
to
receive command signals
from
the remote
control.
10.) TFT
MONITOR
9

VX3020
REMOTE CONTROL OPERATION
G ---+--++ 8
~ VOL
0 0
-+--------+--+- 0 8 0 0
TILT -+t---+--------1 ~1
0000
000
INT ROM
Figure 2. VX3020 Remote Control
10

VX3020
Remote Control Functional Description
1. SOURCE (SRC) Button: Press this button to switch between and select
available sources. (RadioiDisciBiuetoothiUSBIBiuetooth AudioiSWCI
AUX-1 I
AUX-21Camera)
2. EJECT
Button ( • ): Press this button to eject a DVDICDIMP3 disc. Disc play is
stopped, the disc is ejected and the unit will change to radio operation. If the
disc is not removed from the unit and the button is pressed again, the disc will
be re-loaded.
If the disc is not removed from the disc slot within 10 seconds
of being ejected, it will be automatically reloaded to prevent it from being
accidentally damaged.
3. AUDIO
Button: Press to display and select the audio language in
DVD mode.
Each time the button is pressed, the language changes.
NOTE:
The languages for audio vary from disc to disc.
4. VOLUME
Button (VOL+ and-): Press these buttons to increase or decrease
the playback volume.
5. ZOOM
Button (~): (FOR VIEWING IMAGE FILES)
DISC
images-
Press ZOOM button
Once
2 times
3 times
4 times
SO Card images -
Press ZOOM
button
Once
2 times
3 times
4 times
CD Player Performs
Enlarge
the picture 125% of the original size
Enlarge
the picture 150o/o of the original size
Enlarge
the picture 200o/o of the original size
Picture
is returned to original size
SO Card Player Performs
Enlarge
the picture 1 OOo/o of the original size
Enlarge
the picture 200°/o of the original size
Enlarge
the picture 300o/o of the original size
Picture
is returned to original size
6. BAND Button: Press this button to scroll though preset stations or
when in disc mode, this button is used for Fast playback I Slow playback.
Press this button to answer an incoming Bluetooth phone call.
7. [WIDE]
Button: Change display mode.
8. [PRESET •I T] Button: Select preset radio station.
9. EQUALIZER Button (EQ): Press this button to accesses the equalizer menu in
all audio playback modes. BLUETOOTH (BT)
Button: Press this button to enter
the Bluetooth feature.
11

VX3020
10. GOTO Button: Press this button to open direct entry search screen during the
playback
of a disc.
11. N/A
12. [TILT~ I~] Button: This feature not used on the model.
13. [RPT A-B) Button: A-B repeat.
14. [RPT] Key: Repeat playback
15. MUTE Button: Press this button to turn the audio output ON and OFF.
16. POWER Button (0 ): Press this button to turn the unit ON and OFF.
17. SUBTITLE Button: Press to display and select the subtitle language in DVD
mode. Each time the button is pressed, the subtitle language changes.
NOTE: The type and number of languages for subtitles vary from disc to disc.
18. ANGLE Button: Press to display and select different camera angles
in
DVD mode. Each time the button is pressed, the angle changes.
NOTE: The numbers of angles vary from disc to disc. Not all discs contain this
option.
19. MENU Button:- Press this button to access the root menu of a DVD or CD
during playback. The disc will return to normal playback and the root menu
will disappear
if no selection is made within 10 seconds. This button is also
used
to select photo mode of an MP3 player.
20. [TITLE] Button: This feature not used on the model.
21. SETUP Button: Press to this button to enter the system settings menu.
22. FAST FORWARD [-..]Button: Press this button to forward Disc play 2x, 4x, 8x
or 20x normal speed. Press this button while in Radio mode to search available
radio station by increasing
tuning frequency.
23. NEXT FORWARD (~~I) Button- Press this button to skip to the nextchapter,
track
or song during playback of a disc. Press this button while in Radio mode
to search available radio station by increasing tuning frequency.
24. PLAY I PAUSE ( .._,./11) Button: Press this button to pause the playback of adisc.
Press this button again to resume normal playback.
25. PREVIOUS (I.._.._) Button - Press this button to go back to the previous
chapter, track or song
during playback of a disc. Press this button while in
Radio
mode to search available radio station by increasing tuning frequency.
12

VX3020
26. [PIC] Button: Image setting, press this button to adjustthe Brightness/Contrast
and Saturation.
27. FAST REVERSE [ _..] Button: Press this button to reverse Disc play 2x, 4x, 8x
or 20x normal speed. Press this button while in Radio mode to search available
radio station by decreasing tuning frequency.
28. [ •/-=-] Button: Stop Playback I Hangup. Press this button to disconnect an
active Bluetooth phone call.
29. [DISP/CLEAR] Button: Display information /Clear information.
30. NUMBER Buttons {0-9): Press these buttons to directly access chapters and
tracks, dialing phone numbers, orentering passwords.
31. RANDOM Button {#): Press this button to play tracks or chapters in random
order while playing adisc.
32. [INT] Button: lntro playback.
NOTES ON REMOTE CONTROL USAGE
• Aim the remote control at the remote sensor on the unit.
• Replace the battery from
the remote control or insert a battery insulator if
the battery has not been used for a month or longer.
•
DO NOT store the remote control in direct sunlight or in high temperature
environment, or it may not function properly.
• The battery
can work for 6 months under normal condition. If the remote
control won't work, please change the battery.
• Usellbutton shaped"lithium battery"CR2025"(3V) only.
•
DO NOT recharge, disassemble, heat or expose the battery in fire.
• Insert the battery in proper direction according
to the (+)and (-)poles.
• Store the battery in a place where children cannot reach to avoid the risk of
accident.
13

~~T~J?N·····.·•~·
6 JUl ~ i:Y6.1LJ >
VX3020
Remote Control Battery Replacement
Install Battery
Use button-shaped lithium battery CR2025 (3V)" only. Insert the battery
to the battery tray with proper direction according to the (+)and (-) poles.
NOTE: Be sure andinsert the positive (+)side of the battery UNDER the metal tab
in the batterycompartment.
Uninstall Battery
Slide out the battery compartment tray at the bottom on the back of the remote
control.
14
0
-
-
0
0
0
Lithium Battery CR2025 (3V)
( +) Positive facing out
Metal Tab
SLIDE BATTERY DOOR DOWN
v
Figure 3. VX3020 Remote Control Battery Replacement.

VX3020
QUICK
START GUIDE
Turning
the
Unit
ON
or
OFF
Press
the front panel Power/Menu
button
[
~
1
SRC]
to
turn
the
unit
ON
.
To
turn
the
unit
OFF,
press
and hold the
front
panel Power/Menu
button
[
~
1
SRC ] for
2 seconds.
Selecting an
AudioNideo
Source,
Bluetooth,
Steering Wheel
Controls
or
Backup Camera
To
access
an
AudioNideo
source:
1.
Mom~nterily
press
the
front
panel Power/Menu
button
or
touch
the
Menu
icon
ft
located in the upper left corner
of
the display
to
view
the
Main Menu
Screen.
MENU
Button
GJ€!
EJECT
r--:::::
MENU
•
MUTE
~
0
VX3020
~
AVINPUT
//
0
Bluetoolh
(l
t:NS~N
:)
Screen 1 Screen 2
Figure
4.VX3020
Main
Menu
Screen
0
2.
Touch the desired source icon on one
of
the
two
main menu screens.
Screen
1
of
2:
Radio,
Disc,
Bluetooth
(BT),
USB.
Touch page arrow(-->) at
the
bottom
of
the screen
to
access
Screen 2
of
2:
Bluetooth (Audio), Steering Wheel Control
(SWC),
AV-IN1,
AV-IN2, orCamera.
15

VX3020
Mute
Press the volume knob on the front panel or press the [MUTE] Button on the
remote control to mute the volume from the unit.
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary encoder on the front
panel. When the volume level reaches "0" or "so·: a beep sounds, indicating that
the adjustment limit has been reached. The TFT screen displays the volume level
for 3 seconds.
Audible Beep Confirmation
An audible beep tone confirms each function selection.The beep tone can be
disabled through the Setup menu.
Resetting the System
SoftReset- To correct asystem halt or other illegal operation, use the tip of a pen to
press and release the reset button located just belowthe front panel control knob.
~[RESET] Button
Figure5. System Reset Button
For a Hard Reset- Touch the System Reset Icon on theThird Settings Screen.
After asystem
reset, the unit restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the unit will return to Main Menu
once the reset is complete.
Change Aspect Ratio
Press the [WIDE] key on the remote control to adjust the aspect ratio.
Image Settings
1. Enter image setting mode by pressing the [PIC] Button on the remote control.
2. Select the item to be adjusted and touch the Left or Right direction icons
[
1101 ]/[ Dl] on the user interface to adjust the value.
3. To exit image setting mode, press the [PIC] Button on the remote control again
or simply stop making adjustments.
.r
-:...' 1
!\"'
10
----
Brightness m H
10
Contrast m D
10
Saturation
..
ml
Jo•...-.r
-
\..bU>.::.~-::,.-
Figure6.1mage SettingsScreen
16

VX3020
Equalizer Controls
Equalizer
(EQ):
Adjustment
can
be made after entering one
of
the audio/video sources
(Disc,
Radio,
USB,
AV-IN1,
or
AV-IN2)
Touch the Equalizer
(EQ)
icon to view the Equalizer Control
Screen
to
select a
desired audio preset level (
Pop
I
Techno
I
Rock
I
Classic
I
Jazz
I
Optimal or
User),
make adjustments to the audio
Balance
and
Fade
levels or
to
turn the Loudness
option
ON
or
OFF.
Touch
the return icon
to
return
to
the current source.
Playing a Disc
To
begin playback
of
an
AudioNideo
Disc:
1.
Press
the front panel PowerNolume/Mute control knob
to
turn
the
unit
ON.
2.
Insert a disc with the label side facing
UP
and playback will begin
automatically.
Parking Brake Inhibit
When the pink"Parking"wire
is
connected
to
the vehicle Parking
Brake
circuit
the
front
TFT
monitorwill display video when the Parking
Brake
is
engaged.
SYSTEM SETTINGS
1.
Touch the Menu icon ft located in the upper left corner
of
the display
to
display
the main menu.
2.
Touch the Settings icon
[*]and
the settings menu
is
displayed.
Figure 7. Settings
Menu
Screen
17

J
VX3020
General Settings
1. Touch [General], if necessary.
2. Touch to highlightasetting to display/select an option.
General settings Options Description
Radio Region USA/Asia/Japan/Europe/Eur LW/ Select one that matches your location.
Oirt
Local Select Local
to receive only stations with extremely
Radio Range strong signal.
Distance
On
Turn-ON the beep sound. Each time you press a button,
Beep
the unit beeps.
Off
Turn-OFF the beep sound.
Calibration Start Calibrate the touch screen.
On
Turn-ON Retail Demo Mode.
Demo
Off
Turn-OFF Retail Demo Mode
4. Touch Menu icon A located in the upper left corner of the display to exit.
Calibration
Calibrate the touch screen using the calibration setting function.
Recalibrating the touch screen:
1. Press the [Calibration] option on the setup menu to enter.
2. Touch [Yes] to enter.
3. Press and hold the center of [+]for 5 seconds, the [+]will move automatically.
4. Aim at center of [+],follow the path as shown in the figure. Once steps 1-4 are
complete the system will automatically exit calibrating mode.
I
®-··· ··-· ·----~- ... ·~·.·· -~-@
Figure 8. Calibration Screen
18

VX3020
Video Settings
1. Touch [Video].
2.
Touch an option repeatedly
to
select.
Video settings Options Description
Full
Aspect Ratio Adjust aspect ratio.
Normal
Mirror
Rear
Camera Reverse
the
camera image
as
if
looking
through
a rear-view mirror.
Normal
3.
Touch
the
return icon
to
exit and return
to
the previous screen.
Time Settings
1. Touch
[Time].
2.
Touch
an
option repeatedly
to
select:
Time settings Options Description
Date Year
I
Mon
I
Day Touch [ .._ ] or [
T ]
to set year, month and day.
Clock Mode 12Hri24Hr Touch [12Hr] or [24Hr] to switch clock mode.
Time Hour
I
Min
I
AM
I
Touch [
.._]
or [
T]
to set hour and minutes.
PM
Touch
[.._]or
[
T]
to setAMIPM (only for 12Hr).
3.
Touch the return icon
to
exit and return
to
the previous screen.
Audio Settings
1. Touch
[Audio].
2. Touch
an
option repeatedly
to
select.
Audio settings Options Description
ON
Turn-ON the subwoofer.
Sub woofer OFF Turn-OFF the subwoofer
80Hz
Sub
woofer
120Hz Select a crossover frequency to set a cut-off frequency for the subwoofer's
Filter LPF (low-pass filter).
160Hz
OFF
L o u d n e s s Lo Boost Select low frequency boost only or high and low frequency boost.
Hi&Lo
400Hz
L o u d n e s s 800Hz Select loudness center frequency.
Center 2.4KHz
3.
Touch the return icon
to
exit and return
to
the previous screen.
19

VX3020
Language Settings
1.
Touch [ Language
].
2.
Touch
an
option
repeatedly
to
select.
Language settings Description
OSD Select on-screen display language.
DVD Audio Select DVD audio language. Options available depending
on
DVD disc.
DVD Subtitle Select DVD subtitle language. Options available depending on DVD disc.
DVD Menu Select DVD menu language. Options available depending
on
DVD disc.
3.
Touch
the
return icon
to
exit and return
to
the previous screen.
Bluetooth Settings
1.
Touch [Biuetooth].
2.
Touch
an
option
repeatedly
to
select.
Bluetooth settings Options Description
ON
Turn-ON
the
Bluetooth function.
Bluetooth
OFF
Turn-OFF
the
Bluetooth function.
ON
If
the
pre-paired device
is
within
the effective range, the
unit
re-connects
Auto Connect
to
pre-paired device automatically.
OFF
Need
to
re-connect manually.
ON
Answer paired phone call automatically.
Auto Answer
OFF
Answer phone call manually.
Pair
Code
Set
the password for pairing
the
unit
with
other Bluetooth device.
3.
Touch the return icon
to
exit and return
to
the previous screen.
DVD Rating
1.
Touch [
DVD
].
2.
Touch
an
option
repeatedly
to
select.
DVD
rating Options Description
Set
Password
Set
password
to
restrict
the
play
of
discs.The default password
is
1234.
Kid
safe
Acceptable for children.
G Acceptable for general viewers.
PG
Parental guidance suggested.
PG-13
Unsuitablefor children under age
13.
Rating Level
PG-R
Recommend parents
to
restrict viewing for children under
17.
R Restricted re-parental guidance
is
advised for children underthe age
of
17.
NC-17
Unsuitablefor children under age
17.
Adult Acceptable for adults only.
20