VM8023HD
<l!\,SI-5>
Menu
Operation
0)
~-@
Q-------+-r----
I
VM8023HD I,
~--~---
~-----
I-
.~
~
3""
=;2
....
:;::_,~?
6._;
'
..
j!~
i
---:.
@@@@
Press
and
hold
the
VOUSEUMENU
button (2) for more than two seconds
to access the menu. Press the
VOUSEUMENU
button to move through the
following menu options: Equalizer, Loud Set, Beep Set,
12/24
Mode (clock),
Mirror Image, Vol Mode, A-VOL, Sub LPF and Area Set. The following
procedures assume you have already accessed the menu.
Equalizer
The Equalizer function applies preset sound effects to the unit's audio
output signal. Turn the rotary encoder
to
select from the following equalizer
options: "Off', "Rock", "Hip Hop", "Dance" and "Acoustic". With the equalizer
function activated,
if
bass or treble is adjusted, the EQ Mode will revert to
"Off'.
When the equalizer function is activated, the most recently selected bassi
treble levels cannot be adjusted. When the equalizer function is not active,
the unit will return to the most recently selected bass and treble levels.
Loud
Set
When listening to music at low volumes, this feature will selectively boost
certain bass and treble frequencies. "Off' is the default setting. Turn the
rotary encoder to select "On".
7
Beep
Set
The beep tone feature allows the selection
of
an audible beep tone to be
heard each time the menu is accessed. "On" is the default setting. Turn the
rotary encoder to select "Off'.
12124
Mode
This option allows selection
of
a12 hour or 24 hour clock format. "12 Hours"
is the default setting. Turn the rotary encoderto change to the 24 hour clock
format.
Mi"orlmage
This option allows for selection
of
amirror image view when arear view
backup camera (sold separately) is connected to the CAMERA IN input
on
the back
of
the radio. Turn the rotary encoderto select "On" or "Off'.
Vol
Mode
Turn the rotary encoder to select "Last" or "Adjust".
Last: When the unit is turned on, the volume will resume at the level
selected when last turned off.
Adjust:
If
choosing "Adjust", use the A-VOL setting to specify aturn-on
volume.
Tum-On
Volume (A-VOL)
After selecting "Adjust" for Vol Mode, press the
VOUSEUMENU
button to
access the A-VOL setting and then turn the rotary encoder to select the
desired turn-on volume level. When this option is selected, the unitwill
revert to the adjusted volume each time the unit is turned on.
Sub
LPF
(Low
Pass
Frequency)
After connecting asubwooferto the back
ofthe
unit, turn the rotary encoder
to select acrossover frequency: OFF, 80, 120 or 160Hz.
Area
Set
This option allows you to select the appropriate frequency spacing for your
area. "U.S.A." is the default setting. Turn the rotary encoder to select
"EUROPE".
Dimmer
Press the DIM button (15)
on
the front panel to dimthe screen by
112.
Press
again to darken the screen completely. Press athird time to resume full
brightness.
