Jesse Luggage Slide Lock Plate User manual
2) Delrin slide
2) JJ08 lock buttons
2) Cranks with stainless washers
4) 6x35mm countersink screws with special washers
1) Template / Stiffener Plate (aluminum)
1) Small Tube silicon
Jesse Luggage
Slide Lock Plate
Install guide
RED Pattern is used for mounting a top box to a 15" wide
RED Pattern is used for mounting a top box to a 15" wide
"Slide Lock Plate"
GREEN Pattern is used when mounting a top box to a 20"
GREEN Pattern is used when mounting a top box to a 20"
wide "Slide Lock Plate"
The pattern plate is also used as a stiffener plate and is put
between the bottom of the top box and the slide lock delrin
Use the template, that is also used as a stiffener plate when installed between the
bottom of the top box and the delrin slides to mark the holes needed.
(Inside pattern is for smaller plates #S-1514-10 and #LC-1519-15)
(Outside pattern is used for the plates #SW-2013-10 and #658-2019-15)
Install a little silicone on
the plate
The stiffener plate will
them be mounted between
the
Delrin and bottom of the
top box for extra strength.
The pattern on the
The pattern on the
left is used for the
left is used for the
15" Plate
15" Plate
