Jetson Z12 User manual

EXTREME-TERRAIN COMBO
Z12 GALAXY HOVERBOARD + JETKART® XT

TABLE OF CONTENTS
What’s in the Box 1
Features & Specs 2
Charging the Battery 3
Indicator Lights 4
Riding the Z12 Galaxy 5
How to Recalibrate 6
Connecting to Bluetooth® 7
Assembly 8
Attaching the JetKart® XT 9
Riding the JetKart® XT 10
Care and Maintenance 11
Safety Warnings 12

1. WHAT’S IN THE BOX
2
1
1. BATTERY INDICATOR AND STATUS INDICATOR
2. POWER BUTTON

6xA 6xB 5/32 7/32
3. 4. 5.
6.
8.
7.
3. FOOT REST 6. SEAT
4. FOOT REST TUBE 7. HANDLEBAR
5. FRAME TUBE 8. FRONT WHEEL

2. FEATURE AND SPECS
• Weight Limit: 250 lbs.
• Product Weight: 20 lbs.
• Recommended Age: 13+
• Tire Size: 6.5”
• Max Speed: Up To 12 mph
• Max Range: Up To 10 miles
• Battery: 25.2V, 4.0 Ah Lithium Ion
• Motor: 400W (200W*2), Dual Hub Motor
• Charger: 100-240V
• Charge Time: Up To 3 Hours
• Climbing Angle: Up To 15°
Z12 GALAXY
• Weight Limit: 250 lbs.
• Product Weight: 18.25 lbs.
• Recommended Age: 13+
• Tire Size: 6”
• Frame: Aluminum Alloy
• Seat Material - Imitation Leather
• Seat Padding – Polyurethane Foam
JETKART® XT

3. CHARGING THE BATTERY
Charging Port
A few must-do’s:
• Only use the included charger
• Plug the charger into the wall before the Charging Port
• Don’t turn on the Bolt while it’s charging (it needs its rest)
• Charge the battery until it is fully charged - up to 3 hours
• Replace the cover over the Charging Port when done
• Remember to have fun!
CHARGING INDICATOR ON THE CHARGER:
Red Light: Battery is charging
Green Light: Charging is complete

4. INDICATOR LIGHTS
12
1. Battery Indicator Light:
• Green light - Over 20% power.
• Flashing yellow light - 10-20% power. Time to charge!
• Red light with an alarm - Less than 10% power.
Warning: If the battery power goes below 10%, the Z12 Galaxy will
automatically turn off as a safety precaution.
2. Status Indicator Light - Lights up green when you step onto the
Z12 Galaxy. If the Status Indicator Light turns red or if you are having
issues with the Z12 Galaxy, you may need to recalibrate it.

5. RIDING THE Z12 GALAXY
NEUTRAL
TURN LEFT
TURN RIGHT

6. HOW TO RECALIBRATE
If you are having issues with the Z12 Galaxy, you may need to
recalibrate it. Follow these steps...
1. Place the Z12 Galaxy on a flat, level surface. Now say something
nice to it. Just kidding, but, go ahead if you like.
2. Hold the Power Button (for about 5 seconds) until you are notified
of a successful recalibration.
3. Restart the Z12 Galaxy by turning it off and then on.
4. You’re all set! The Z12 Galaxy is ready to roll.
Hold for
5 seconds

7. CONNECTING TO BLUETOOTH®
The Z12 Galaxy comes equipped with two Bluetooth® modules - one for the
Bluetooth® speaker and one for the Ride Jetson app.
To connect to your Bluetooth® speaker:
• Turn on the Z12 Galaxy, and it will become discoverable to your handheld
device.
• Activate your Bluetooth® in your handheld device’s settings.
• Find the Z12 Galaxy in your handheld device’s list and select it.
• Now you can play your awesome tunes.
To connect to the Ride Jetson app:
• Open the Ride Jetson app on your handheld device.
• Tap the Bluetooth® symbol in the top left corner of the app.
• Select your Z12 Galaxy. Default password is 000000. (To customize your
password go to Settings in the App. If you forget your new password, you can
factory reset the Z12 Galaxy by recalibrating)
• You should now be connected to the Z12 Galaxy!
MODE SETTINGS
In the Ride Jetson app you can choose from three settings:
• Beginner mode max speed: Up to 6 mph
• Intermediate mode max speed: Up to 8 mph
• Advanced mode max speed: Up to 10 mph
NOTE: Other features that can be adjusted include Steering Sensitivity, Driving
Force, and Auto Shutdown Time.