JETWAY HPC070SC-FP2807A Series User manual

Panel PC
User’s Manual
NO. G03-PCNP93CFP-F
Manual Revision: 1.0
Release Date：April 18, 2018

i
Safety Precautions.............................................................................................................. ii
User’s Notice....................................................................................................................... iii
Package Contents............................................................................................................... iii
Environmental Protection Announcement ....................................................................... iii
Chapter 1 Introduction ..................................................................................................... 1
1-1 General Descriptions............................................................................................ 1
1-2 Specifications ....................................................................................................... 2
1-3 I/O Outlets ............................................................................................................. 3
1-4 Connector Pin Definition ...................................................................................... 5
Chapter 2 Hardware and Installation ............................................................................... 7
2-1 Dimensions and Outlines ..................................................................................... 7
2-2 To Open the Chassis ............................................................................................ 10
2-3 Jumper Settings.................................................................................................... 11
2-4 Hardware Installation............................................................................................ 14
2-4-1 To install MSATA Card ............................................................................. 14
2-4-2 To install Wireless LAN Card................................................................... 15
2-4-3 To install Optional Fixed Parts ................................................................ 17
Chapter 3 Introducing BIOS ............................................................................................. 18
3-1 Entering Setup ..................................................................................................... 18
3-2 BIOS Menu Screen............................................................................................... 19
3-3 Function Keys ...................................................................................................... 19
3-4 Getting Help ......................................................................................................... 19
3-5 Menu Bars ............................................................................................................ 20
3-6 Main Menu ............................................................................................................ 20
3-7 Advanced Menu ................................................................................................... 21
3-8 Chipset Menu ....................................................................................................... 27
3-9 Security Menu ...................................................................................................... 29
3-10 Boot Menu ............................................................................................................ 29
3-11 Save & Exit Menu................................................................................................. 30
Chapter 4 Touch Panel..................................................................................................... 31
APPENDIX ........................................................................................................................... 33
TABLE OF CONTENT

ii
Safety Precautions
 Operate the product according to the correct installation steps and with great care to make sure
safety and comfort using experience. Please refer to the following safety instruction guide to avoid
danger of electric shock or fire. Abide by the previous safety instruction guide to use and maintain
the product and the hard disk to make sure of safe operating environment.
 Please follow the instruction manual for operation guide.
 The appropriate operating temperature ranges from 0 °C–50 °C.
 The operation humidity for this product is 5% to 80% RH.
 To avoid high temperature, please DO NOT overload the maximum power of the external power
supply while the system is consuming high voltage. Be aware of the maximum temperature
allowance of the power supply.
 See to it that the product is not working near the water.
 Always unplug power cable and other hardware cables from the system before cleaning.
 Apply only dry cloth for cleansing the product.
 Make sure that there is no heat source nearby when the product is working.
 Make sure that the thermal louver of the product is not blocked.
 Make sure to remove the power plug from the product when there is a thunder storm.
 Please remove the power plug from the product when you are not going to use the product for a
long time.
 Make sure to set up or use the product on a stable surface.
 Make sure not to drop the product or strike it by any means.
 Make sure not to move the product when the power is on.
 Make sure not to step on the power cables and other cables or rest anything in them..
 Be sure to ground yourself to prevent static charge when installing any internal components. Use a
grounding wrist strap and place all electronic components in any static-shielded devices. Most
electronic components are sensitive to static electrical charge.
 Disconnect the power cord from the Panel PC unit prior to any installation. Be sure both the
system and all external devices are turned off. Sudden surge of power could ruin sensitive
components. Make sure the Panel PC unit is properly grounded. unit
 Do not open the system’s back cover. If opening the cover for maintenance is a must, only a
trained technician is allowed to do so. Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic discharge, observe the following
precautions:
 Before handling a board or integrated circuit, touch an unpainted portion of the system
unit chassis for a few seconds. This will help to discharge any static electricity on human
body.
 When handling boards and components, wear a grounding wrist strap available from
most electronic component stores.
 Please contact qualified technician for maintenance or repair.
 Use only accessories and parts that are made by the qualified manufacturer.

iii
User’s Notice
Copyright of this manual belongs to the manufacturer. No part of this manual, including the products
and software described in it may be reproduced, transmitted or translated into any language in any
form or by any means without written permission of the manufacturer.
This manual contains all information required for the utilization of this product to meet the user’s
requirements. But it will change, correct at any time without notice. Manufacturer provides this manual
“as is” without warranty of any kind, and will not be liable for any indirect, special, incidental or
consequential damages (including damages for loss of profit, loss of business, loss of use of data,
interruption of business and the like).
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and they are used only for identification or explanation and to
the owner’s benefit, without intent to infringe.
Package Contents
X1 X1 X1 X1 X2 Optional
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. To minimize
pollution and ensure environment protection of mother earth, please recycle.

1
Chapter 1
Introduction
1-1 General Descriptions
Thank you for purchasing the system, a new product developed, designed and
manufactured under leading technical power and consistent dedication to fine
workmanship.
 10-points Multi Capacitive Touch
 Cable-less,streamlined enclosure for highly efficient heat dissipation
 Enclosed in robust aluminum casing
 Edge-to-edge narrow bezel design and fan-less cooling system
 Designed for easy wall mount, panel mount, and VESA mount installation
 A true flat, easy-to-clean front surface with edge-to-edge design
 IO ports designed for easy connection
 IP65-rated front bezel against water and dust
 Onboard Intel® Bay Trail series SoC processor, with low power
consumption never denies high performance
 Onboard 2GB DDR3L 1333Mhz SO-DIMM
 1* half-size Mini-PCIE slot & 1* full-size MSATA slot
 Support USB 3.0 data transport demand
 Support 4G SIM card socket
 Support 802.11 b/g/n WiFi communication
 Support HDMI video output
 Support RS232/422/485 serial port
The system has the following features besides other basic functions:
 WiFi: the Mini PCI-E onboard socket in the board is integrated a with a WiFi
card(802.11 b/g/n) that can act as a mini wireless modem when external
antennas are connected. Different computers in the house can build wireless
connections through the Mini TOP system and take necessary data from it, thus
reducing the complexity in network establishment.
 Giga LAN: The system is integrated with Gigabit LAN network controller with
ACPI management realizing efficient power management for the operating
system.
 USB3.0: Experience Fastest data transfers at 5Gb/s with USB3.0 the new latest
connectivity standard. Built connect easily with next-generation components and
peripherals, USB3.0 transfers data 10x faster and backward compatible with
previous USB2.0 components.
 CPU Usage: The CPU Usage diagram shows a beautiful data curve that
indicates a pretty low CPU usage percentage for video playback of different
formats. GPU performances are excellent as well.
 dB Value: The design of the system takes into consideration the needed quiet

2
operating environment in the living room and the average dB value is below 26
under normal operation to ensure the tranquility when you are absorbed in film
watching.
1-2 Specifications
Main CPU Board
 CPU
 Intel® Bay Trail series SoC processor
 System Memory
 Onboard 2GB DDR3L 1333MHz SO-DIMM
 BIOS
 AMI 64Mb Flash ROM
I/O System
 Standard I/O
For HPC070SC-FP2807A Series:
 1 * Euro terminal block by 12V DC input
 1 * USB3.0 & 1 * USB2.0 port
 1 * RJ-45 LAN port for Gigabit Ethernet
 1 * HDMI port
 1 * RS232/422/485 serial port
 1 * Power button
For HPC-080SC-FP2807A/ HPC-080SC-FP2930A & HPC-080SC-2807A Series:
 1 * Euro terminal block by 12V DC input
 1 * USB3.0 & 3 * USB2.0 port
 1 * RJ-45 LAN port for Gigabit Ethernet
 1 * HDMI port
 1 * RS232/422/485 serial port & 1 * RS232 serial port
 1 * Power button

3
1-3 I/O Outlets
For HPC070SC-FP2807A Series:
Bottom View
Rear IO Q’ty
DC-in Jack 1
USB2.0 1
USB3.0 1
RJ-45 1
HDMI 1
RS232/422/485
1
RS232 N/A
Power Button 1
For HPC-080SC-FP2807A/ HPC-080SC-FP2930A Series:
Bottom View
Rear IO Q’ty
DC-in Jack 1
USB2.0 3
USB3.0 1
RJ-45 1
HDMI 1
RS232/422/485
1
RS232 1
Power Button 1

4
For HPC-080SC-2807A Series:
Bottom View
Rear IO Q’ty
DC-in Jack 1
USB2.0 3
USB3.0 1
RJ-45 1
HDMI 1
RS232/422/485
1
RS232 1
Power Button 1
Notice:
1. The diagrams in this manual only serve for illustration, if there is any differences that we
do not cover, please refer to the actual product you purchase.2.Model
HPC-080SCSC-FP2807A & HPC-080SCSC-FP2930A series share the same IO
specifications, as the above diagram shows; 3.The main differences of
HPC-080SCSC-FP2807A & HPC-080SCSC-FP2930A series are mainly in size and
different embedded CPU type.
Power
Button
1*USB 3.0
HDMI 1*RJ-45
RS232/422/485
RS232 DC-Jack
2*USB 2.0
1*USB 2.0

5
1-4 Connector Pin Definition
(1) Connector Function
Icon Name Function
Power Button Press to turn on/off the system.
USB 2.0 Port To
connect USB keyboard, mouse or other devices
compatible with USB specification.
USB 3.0 Port To
connect USB keyboard, mouse or other devices
compatible with USB specification. USB 3.0 ports
supports up to 5Gbps data transfer rate.
HDMI Port T
o connect display device that support HDMI
specification.
COM Port Mainly
for user to connect external MODEM or other
devices that supports Serial Communications Interface.
RJ-45 LAN Port This connector is standard RJ-45 LAN jack for
Network
connection.
DC-in Power
Connector
For user to connect compatible terminal power block to
provide power supply for the system.
(2) I/O Connectors Pin Definition
COM Port Connector
The pin assignment for RS-232/ 422/ 485 is listed as follows:
Pin NO.
RS232 *RS422
(optional)
*RS485
(optional)
1 DCD TX- DATA-
2 RXD TX+ DATA+
3 TXD RX+ NC
4 DTR RX- NC
5 GND GND GND
6 DSR NC NC
7 RTS NC NC
8 CTS NC NC
9 RI NC NC
For RS232/422/485 COM port in normal settings can functions as RS232 port. With
compatible COM cable they can function as RS422 or RS 485 port as well. User also
needs to go to BIOS to set ‘Transmission Mode Select’ for COM1/COM2 (refer to
Page 21) at first, before using specialized cable to connect different pins of this port.

6
*Note: in the case that the COM port marked as RS232 port, it can not support
RS422/485 function.
RJ-45 Ethernet Connector
Ethernet connection can be established by plugging one end of the Ethernet cable
into this RJ-45 connector and the other end (phone jack) to a 1000/100/10-Base-T
hub.
The pin assignment for RJ-45 Ethernet LAN connectors are listed as follows:
Pin Definition Pin Definition
L1 MDI0+ L5 MDI2+
L2 MDI0- L6 MDI2-
L3 MDI1+ L7 MDI3+
L4 MDI1- L8 MDI3-
A Active LED (Yellow)
B 100 LAN LED (Green) / 1000 LAN LED
(Orange)

7
Chapter 2
Hardware and Installation
2-1 Dimension and Outlines
Product Dimension for HPC070SC-FP2807A Series:
* Measure Unit: mm.

8
Product Dimension for HPC-080SC-FP2807A/ HPC-080SC-FP2930A Series:
* Measure Unit: mm.

9
Product Dimension for HPC-080SC-2807A Series:
* Measure Unit: mm.

10
2-2 To Open the Chassis
Use a screwdriver to unscrew the screws marked above that lock the back cover (see red circles).
Remove them to open the chassis.
HPC070SC-FP2807A
HPC-080SC-FP2807A/HPC-080SC-FP2930A
HPC-080SC-2807A

11
Notice: When lifting the cover up to open the chassis for further installation, see to it that
the connecting cables are not unplugged. It is very important for the cables connected to
their original places for normal functioning.
2-3 Jumper Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install
jumper clip on 2 jumper pins to close the pins. And remove jumper clip from 2
jumper pins to open the pins. Diagram 2-1 illustrates how to set up a jumper.
JP1 (3-pin): INVERTER VLED 5V/12V Select
2-3 Closed: Inverter VLED= 12V.
JP1→INVERTER
1-2 Closed: Inverter VLED= 5V;
1
3
1
3
JPCOM1 (4-pin): COM1 Header Pin9 Function Select
JCOMP1→COM1 Header
4-6 Closed:
RI= 12V.
1
3
5
3-4 Closed:
RI= 5V;
2-4 Closed:
RI=RS232;
4
6
2
6
5
3
1
4
2
5
3
1
6
4
2

12
JP3 (4-pin): LVDS VLCD 3.3V/5V/12V Select
JP3→LVDS VLCD
4-6 Closed:
VLCD = 12V;
6
4
2
3-4 Closed:
VLCD = 5V;
2-4 Closed:
VLCD = 3.3V
6
4
2
6
4
2
3
3
3
1
5
1
5
1
5
Pin 1-3 of J1 (10-pin): Clear CMOS Setting
Pin 1-3 of J1→ Clear CMOS Setting
Pin 1
1-3 Closed: Clear CMOS.
1-3 Open: Normal;
Pin 1
2
2
9
10
9
10
Pin 5-7 of J1 (10-pin): Clear Management Engine Setting
Pin 5-7 of J1→ Clear ME Select
Pin 1
5-7 Closed: Clear ME.
5-7 Open: Normal;
Pin 1
2
9
10
9
10
2

13
Pin 2-4 of J1 (10-pin): AT/ATX Mode Function Select
Pin 2-4 of J1→ AT Mode Select
Pin 1
2-4 Closed:
AT Mode Selected.
2-4 Open:
ATX Mode Selected;
Pin 1
2
9
10
9
10
2
*ATX Mode Selected: Press power button to power on after power input ready;
AT Mode Selected: Directly power on as power input ready.
Pin 6-8 of J1 (10-pin): Security Management Engine Function Select
Pin 6-8 of J1→ Didable ME Select
Pin 1
6-8 Closed:
Disable ME Selected.
6-8 Open:
Normal;
Pin 1
2
9
10
9
10
2
* Note: Pin-9 & Pin-10 of J1 block is only optional for the latest upgraded PCB
version. The previous J1 block only come with 8 pins.

14
2-4 Hardware Installation
Remove the screws that lock the back cover to the system from the back side before
hardware installation procedures (refer to 2-2).
2-4-1 To Install MSATA Card
1. Place the Panel PC with this side up
upon a flat operation platform. See to it
to put a protective cushion under the
panel to prevent possible damage.
2. Remove the screws that lock the chassis
on the back side of the system (refer to
2-2).
3. Locate the full-size MSATA slot on the
board.
4. Remove the marked screw and use it to
lock MSATA card to the slot in later
installation.

15
5. Insert the gold-figure side of the
compatible MSATA card into the slot at a
30 degree angle and press down.
6. Lock the card to the board by tightening
up the screw to the marked spot.
2-4-2 To Install Wireless LAN Card
Please refer to the following instructions for the installation of the wireless LAN card.
1. Locate the Mini-PCIE card slot on the
board.
2. Remove the marked screw and use it to
lock WIFI card to the slot in later
installation.
3. Insert the gold-figure side of the
compatible WI-FI card into the slot and
press down.
4. Lock the card to the board by tightening
up the screw to the marked spot.

16
5. The metal hats on the end of the antenna
string are sealed by acetate tape to avoid
possible damage to the system.
6. Tear off the tape to find metal hats of
WiFi antenna string.
7. Press the metal hats on the end of the antenna string to the antenna slots on the
card as showed.