JFA-CAM LRS-367 User manual

Surround View Monitoring System
User’s Guide
Please kindly read this guide carefully before using correctly
Special for bus/ School bus/ Truck/ Fire engine

2
1
Table of Contents
2.0 Product features
3.0 Main application scenarios
4.0 Features Profile
6.0 BDV06-Diagram
7.0 BDV09-Diagram
5.0 Specification
9.0 Installation preparation
10.0 Product installation
8.0 Remote control description
11.0 Place calibration clothes &adjust the cameras angle
12.0 Birdview calibration
1.0 Product brief 3
4
5
5
6
7
8
10
11
9
13
14
Safety Tips
It is a parking and driving assistant system
which offers the road situation around the vehicle
to eliminate blind spots and thus works perfectly
as a visual guide for safe parking and driving.
It may bring inconsistence between the screen
image content with actual surroundings of the
vehicle. Please handle this case according to
actual situation.
Please contact
professional installation
service providers in
case of any abnormal
situations.
Never hotplug the host
device when power is
connected. The host
device can’t be sinked
in any kind of liquid.
Please read this
manual carefully
before using and
pay attention to
this section for the
safety Instructions.
Serious traffic accidents may
be caused by keeping watching
on the screen or operating
the system during driving.
It is strong recommended
that do not operate this system
while driving.
13.0 System settings 16
14.0 Driving Records 17

2.0 Product Features
2.1 Four 180 ultra-wide angle fish-eye cameras to provide
raw images for processing
2.2 360° seamless birdview display without blind angle.
2.3 Automatic generation of birdview, easy calibration and operation.
2.4
Multilingual.
2.13 Optional Birdview and Single view image.
°
Seamless video merging based on Quad core ARM CPU and
hardware high efficiency acceleration engine.
2.5 Pixel statistic engine for brightness balance among four channels
real-time outside cameras.
2.6 CVBS signal output display.(BDV06)
LVDS signal output display. (BDV09)
2.7 Support alternative recording media for TF card and USB disk
2.8 The system applicable for almost all types of vehicle,including Buses,
Trucks, Lorries, Limousines, Tank and even Jumbo Jets.
Typical length of the vehicle is 5.5m to 18m.
2.9 Smart power managements to save automobile’s battery.
2.10 High video recording resolution up to 2560*1440
2.11 High quality for main chipset with well protected circuit and
devices in order to achieve the best system performance and stability.
2.12 Support
4
1.0 Brief Introduction of System
The surround view parking assistant system captures the images of four different views
(front/rear/left/right), with the use of four ultra-wide angle fish-eye cameras installed around
the vehicle. With the built-in advanced image processing and stitching algorithm, it timely
and continuously synthesizes and shows the birdview image around the vehicle. The driver
can intuitively observe vehicle position and surrounding obstacles, then bring the vehicle
back to the parking space or pass by the complex road, to effectively avoid accidents such as
friction, crash, fall, and so on.
3
Raw images Image after
fusion processing
Image after
undistortion processing
Image synthesis processing theory
Output image shown during driving, steering or reversing
During left steering During right steering
During driving During reversing
Check Surrounding!
Check Surrounding!
Check Surrounding!
Check Surrounding!

Optional:
Camera Chip sensor Aptina AR0130
1/3 HD Sony sensor
Effective Pixels:1280(h)*960(v)
Horizontal resolution:960H
Dynamic range:>78dB
Video output: AHD
Waterproof:IP67
Video resolution:2560*1440
Working voltage:3.3v
Working current:<100mA
Cameras
CPU:Quad-core Cortex™-A7
FLASH: 4GB
DDR: 512MB
Languege: English,Russian, Japanese,Korean,
Portuguese,German,Chinese, Chinese traditional.
Working voltage range:9~36v
Working current:<400mA
Standby current:<10mA
Working temperature range:-30
℃
~ 80
℃
Working humidity:40%~80%
Host
Displayer IPS Displayer Resolution:1024*600
Video input: LVDS
6
5
3.0 Main application scenarios
4.0 Features Profile
5.0 Specification
Chec k surroundings !
Check surroundings!
Check surroun di ng s!
Chec k surroundings !
When the car
ACC on,the system
will auto record
You can view the
any one camera
single view.
When the car
turn right, the
screen will
auto show
the right view
When the car
turn left, the
screen will
auto show
the left view
When the car
reverse(pull up
the reversing
gear),the screen
will auto switch
to the rear view
When the car driving,
the screen can
optional show the
driving view.
You can set the
birdview show’s
time in the Menu

8
7
Back Camera
Front Camera
Right Camera
Left Camera
USB
Orange
Brown
Gray
Red
Yellow
Black
Right light
Back light
Left light
ACC
Battery+
GND
(Supply Voltage:8~36V)
Remote Receiver
USB DISC Record
Video cable
Trigger line Blue
USER
DISPLAYER
Back Camera
Front Camera
Right Camera
Left Camera
USB
Orange
Brown
Gray
Red
Yellow
Black
Right light
Back light
Left light
ACC
Battery+
GND
(Supply Voltage:8~36V)
Remote Receiver
USB DISC Record
USER
DISPLAYER
LVDS Signal
LVDS Signal
HDMI
HDMI
6.0 BDV06-Diagram 7.0 BDV09-Diagram
Check Surrounding!