Jiaway H3000 User manual

1


ENGLISH VERSION

２
Product Overview

３
Specifications
Optical engine: DLP
Brightness: 50lums
Lamp: RGB LED, over 20,000 hrs
Resolution: 854 x 480
Projection size: 20~100 inches
Projection distance: 2~3m
Contrast: 1000：1
Screen ratio: 16:9 4:3
Focus: Manual focus
OS: Android4.4
CPU: 1.4GHz
Built in memory: 8GB
WiFi: Support 2.4G
BT: Support 4.0 BLE
USB and TF card: up to 32GB
Video formats: MPEG4、AVI、RM、RMVB、
FLV、WMV、3PG、MP4、MKV, etc.
Picture formats:JPEG,BMP,GIF, etc.
Documents: WORD EXCEL PPT PDF
Speaker: Built in 2Wx1
Language: Multilingual
Battery: 3300mAh

４
Basic operations
1.Power on: Press ON/OFF key for 3
seconds, the blue light on,then the
opening picture comes out.
2.Poweroff:Press ON/OFF key for 3
seconds, the projecting picture will remind
you device is shutting down(正在关机).
3.Back: Press ON/OFF key for 1 seconds.

５
Reboot
Reboot:Please Press reset button, when
abnormal condition occurs.
Charging
Charging:A power bank or home charge can
recharge the device.

６
Display with more devices
Simultaneously via wireless -For IOS
Series product.
Its possible to achieve wireless connection with more
devices in same time by using the built-in wireless
display function for iphone,ipad & mini projector.
Note:Please make cell phone&projector connect the same
wifi,then go to step 2
1. In setting menu,click & connect portable hotspot.
Setting：Tethering&protable hotspot-Set up wifi
hotspot；change WIFI password and Frequency.

７
2. Finding AIRPLAY in your phone,then choose
ESHARE.XXX,open mirror button,finish wireless.

８
Wireless display in same time For
Android Devices
Note:Smart phone & android tablet pc should support
Miracast function
1、Turn on wifi in two devices,finding WI-FI display in
mini projector as following.
2、Starting up your cell phone or tablet with,
setting-display-wireless display or screen share &
multi-screens,connect Android XXXX,click accep in ur
projector, 10s later it will achieve display in more
devices in the same time.

９
Wireless display with computer
1. Install EScreen.exe software,opening as following
2. making two devices connect with same wifi or
make laptop connect with the hotspot of the
projector.
3. Click search devices,finding relevant
equipment then click start mirroring.

１０
FAQ(Fequently Asked Qestion)
How to focus
Press the focus button on the side of the
projector.
How to adjust the brightness
In setting-display- brightness adjustment.
Intermittant black screen
Due to outlet obstructions affect the heat
dissipation to make the engine overheat
result in black screen.
Unable to boot(Please make sure
the following points)
1、Low battery or not
2、Plug the power cord & power supply is normal
3、Shutdown normal or not,please restart the
machine.

１１
FCC STATEMENT :
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Warning: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.

１２
However, there is no guarantee that interference
will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with minimum distance 20cm between
the radiator & your body.