Jinbo JLV-12060K Installation instructions

( LED Power Supply, LED driver, Switching Power Supply)
Thank you for using our power supply, please read the below information carefully before
using this power supply!
SPECIFICATION & USER'S GUIDE
1 / 4

Features:
JLV-120036K JLV-24036K
DCvoltage 12V 24V
Voltagetolerance ±1% ±1%
Ratedcurrent 3A 1.5A
Currentrange 0~3A 0~1.5A
Ratedpower 36W 36W
Ripple&noise 100mvp-p 120mvp-p
DCvoltage
ADJ.range ±10% ±10%
Voltagerange
frequency
ACcurrent
Efficiency 83% 84%
Inrushcurrent
Leakagecurrent
Working
temp,humidity
Storagetemp,
humidity
Withstandvibration
Withstandvoltage
Isolatedresistance
Safetystandard
EMCstandard
Others Dimension
PICTURE MODEL: JLV-12060K
3.Tolerance:includessetuptolerance,lineregulationandloadregulation.
84*58*38mm(L*W*H)
Note
1.AllparametersNOTspeciallymentionedaremeasuredat230VACinput,ratedload
and25°Cofambienttemperature.
2.Ripple&noisearemeasuredat20MHzofbandwidthbyusinga12"twistedpair-wire
terminatedwitha0.1uf&47ufparallelcapacitor.
I/P-O/P:1.5KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC
Safety&EMC refertoUL1012
refertoEN55022,CLASSB
Safety
overload
Ratedoutputpower115%~135%startoverloadprotection
protectiontype:hiccupmode,auto-recoveryafterfaultconditionis
removed
Environment
-10°C~+60°C,20%~90%RH
-20°C~+85°C,10%~95%RHnon-condensing
10~500HZ,2G10min/1cycle,periodfor60minutes,eachaxes
Protection
1. Designed for 100% full loading
2. Universal AC input; Smooth-start
3. High transfer efficiency
4. Over-load, short-circuit protection
5. Compact size
6. 100% full-load burn-in tested
Model
170~264VAC,235~373VDC
47~63HZ
0.4A@230VAC
Output
Input
Coldstartcurrent10A/115VAC,20A/230VAC
<1mA/240VAC
2 / 4

1) Over-load/over-current/shortcircuitprotection
2) Abletoworkunder100%fullloadingcontinuously
3)
4) Inputelectriccurrentsugerresisting(5secondsunder300VACinput)
5)
6)
7)
8)
1) Theinputvoltagemustfallinto170~250VAC(somemodelsareabletowork
2)
3)
4) NOwoodorflammablesurfacemounting,keepmin.5CMforpowersupplieseachother
5) Keepawayfrominflammableorexplosiveenvironments
II． Product Features
Complywithinternationalpowerconsumptionstandardofstand by status
under100~250VACinput)50/60HZ
Donotoverload,alsoavoidfreeofloadwhileapowersupplyispoweredon,keepproperloading
Highworkingefficiency,energysaving
I． About this LED power supply (LED driver, switching power supply)
ThisLEDpowersupplyismainlyconsistedoffiveparts:
1)ElectromagneticInterferencenetwork
2)Rectifierfilter
3)Built-inPulseWidthModulationunit
4)Switchforenergytransform
5)LowESRPulseWidthModulationoutputdevices
OurhighefficiencyLEDpowersupplyprovidesyoustablepoweroutputwithstablecurrent,100%burn-intested,andinterferenceof
fluctuationfrominputcurrentwhichisbenefitforthelifespanofLEDappliances.
Choose105°Celectrolyticcapacitor,suitablefortoughworkcondition
Compactsizeandeasyinstallation
Waterprooftypesaresuitableforoutdooruse,waterproofrate:IP67
III． Installation and working environments
Alwayskeepgoodventilationasbelowindicated
3 / 4

Waterproof types:
ACInput:yellow/greenleadisforgrounding,restleadsareforelectricity
DCOuput:Red(brown)possitive+,black(blue)negative-
Non-waterproof types:
1) Thepowersupplywillbeautomaticallyprotectedandentertheabnormalstateof
2) For models have multi-outlets, never connect all loading with single outlet,
please keep balanced loading. If connecting with only single outlet is
necessary, please connect all positive output leads together to provide
electricity fully, also negative leads.
3) Pleasebewellnoticedthattoolongconnectingleadswillcausetolineloss.Soplease
4) Input/outputlead’ssurfacelisteditsdiameterandindustrialstandard,pleasechoose
properextensionleadsaccordingly.Inviewofthelineloss,thelongerextension,the
strongerleadsisneeded.
5) Thispowersupplycanbeconnectedwithplugs,butpleasemakeitwellconnected
andinsulated.
V
．
Working environment:
Outdoortypes:-25°C~+45°C,RelativeHumidity:100%
Indoortype:-25°C~+45°C,RelativeHumidity:under90%
Storageenvironment:-25°C~+80°C,RelativeHumidity:under95%
LED POWER SUPPLY Trouble-shooting Tips
ThereisaprotectioncircuitinthePowerSupplythatwillcutoff(trip)thepowerwheneveranshortcircuitoroverloadcondition
occurs,pleasemakesurecorrectconnectionofpositiveandnegativeterminals(+,-)beforepoweron.
1. Power Supply does not work:
1)Checktheinputpowervoltage.
2)Checkpoweron/offstatus.
3)Checkifthere’sshort-circuitonoutputline.
4)Checkifwrongpositiveandnegativeterminalconnection.
5)Checkiftheoutputindicationlightislighting(forthemodelswhichhavethisfunction).
6)Checkifthefusewellconnected(forthenon-sealedmodels).
2. Over-heated of the Power Supply:
1)Keepgoodventilation.
2)Checktheloadingstatus,avoidoverloading.
3. Unsteady power output:
1)Checkifthere'sover-loadingorimproperoutputextensionleadsconnected.
2)Checkifthere'sstronginterferenceintheworkingenvironment.
3)Checkifthere'smagneticfieldaroundtheworkingenvironment.
4. LED light works dark (weak light, LED not bright enough)
1)Pleasecheckiftheoutputvoltageisgoodforyourrequiremnt(5V/12V/24V...etc.).
2)Chooseproperwiresinaspectsofwire'sdiameterandvoltagecapacity.
3)Checkifthere'sover-loadortoolongextensionleadsbeenused.
IV. Wire Connection
Makesurewiresarewellconnected,mostofourmodelshavemulti-outlets,werecommmendthefollowingloadingorder:negative–
positive-negative-positive-negative….etc.Pleasealwayskeepbalancedloading.
Cautions for Connecting Leads and Loading
intermittentconnectioniftheloadpowerexceedsthemaximalratedoutputpower
(normally5~20%exceeds).
avoidtoolongextensionwithouputleads.
The installation and wire connection of this power supply should be conducted by qualified
technicians!
4 / 4