JJC WR-100 Series User manual

1
JJC WR-100 WIRELESS CONTROLLER
Thank you for purchasing JJC WR-100 series wireless controller. For the best performance, please
read this instruction carefully before use.
Remove the remote control socket cap of the camera.
Take out the JJC WR-100 wireless controller receiver and plug it into the remote control socket of the
camera.
Slide the function button in the W Mode. The receiver is active. Under this condition, the receiver can
receive the signal from the transmitter; the receiver consumes the power of the battery. User can uses
the Shutter button of the transmitter and Focus button to control the Camera’s shutter and Focus.
Press the transmitter’s shutter button to take a photo. Press the transmitter’s focus button to focus.
Slide the function button in the O Mode. The receiver is turnoff. Under this condition, the transmitter
can not active the receiver to control the camera. The receiver will not consume any power of the
battery. User can use the shutter button of the receiver to take photos. Press the shutter button
halfway to focus. Press it fully to take a photo.
Slide the function button in the L Mode and turn on the camera to BULB mode. Under this condition,
the transmitter opens the lens; Slid the function button in the O Mode, the transmitter closes the lens.

2
When the camera is under no-Bulb mode and taking the photo, the transmitter will lock the shutter
button, and the camera will implement continues shooting. Under L mode, the transmitter can not
control the receiver.
Operating range
Maximum operating range 100m. (The operating range may be obstructions or interference with other
electronic equipment to reduce the distance)
Charging
The WR-100 inbuilt High Capacity Li-ion battery. Take out the power adapter, plug it into the power
socket of the transmitter and then plug the power adapter to the power outlet. When the transmitter is
under charging, the light of transmitter is on. There are 5 lights, each light represent 20% of battery
power. When all of the lights are on, which mean the battery is full, please take off the power
adapter.
WR-100A compatible with Canon
EOS 5D EOS 1D EOS 1Ds EOS 1D Mark II EOS 1Ds Mark II
EOS 1Ds Mark II
Digital EOS 1D Mark II N Digital EOS 1D Mark III EOS 1DS Mark III EOS 400D Digital
EOS 30D EOS 20D EOS 10D EOS D60 EOS D30
EOS 40D EOS 1V EOS 3 EOS D2000
WR-100B compatible with Nikon/ Kodak/ Fuji
D2H D1x D1h D1
D2x D100* D200 F5
D2Xs D300 D3
Nikon
F6 F100 F90 F90x
Kodak DCS-14n
Fuji Finepix S3pro Finepix S5pro
*MB-D100 Vertical Grip/Battery Holder Needed
WR-100C compatible with Canon/ Pentax/ Contax/ Samsung
K100D K110D K10D *ist DS2
K100D Super
*ist D *ist Ds *ist *ist DL
PENTAX
MZ-6 ZX-L MZ-L *ist DL2
645 N N1 NX
CONTAX N Digital

3
Samsung GX-1L, GX-1S GX-10
EOS 30 EOS 33 EOS 50E EOS 300
EOS 300V EOS 300D EOS 350D EOS 3000
EOS 50 EOS 500 EOS 55 EOS 500N
EOS 300X EOS Kiss EOS New Kiss EOS Kiss 7
EOS Kiss III EOS 7 EOS 7s EOS400D
EOS Digital Rebel EOS Digital Rebel XT
EOS Digital Rebel XTi Kiss Digital Kiss Digital N
ELAN 7N ELAN II ELAN DATE ELAN 7
ELAN 7NE ELAN 7N ELAN IIE Rebel 2000
Rebel G Rebel T2 Rebel Ti Rebel X
CANON
Rebel XS
WR-100D compatible with Panasonic
DMC-FZ20 DMC-FZ20k DMC-FZ20S DMC-FZ30
DMC-FZ30K DMC-FZ30S DMC-FZ50K DMC-FZ50S
DMC-FZ50 LC-1 L1 DIGILUX 2
Panasonic
DIGILUX 3
WR-100E compatible with Olympus
E1 E10 E20 E20N
E300 * E100RS C8080 * C7070 *
Olympus C5060 * C2500L
*via the Power Battery Holder
WR-100F compatible with Sony/ KonicaMinolta
Sony DSLR-A100 DSLR-A100K
Maxxum 7D Maxxum 5D Dynax 7D Dynax 5D
Maxxum 9 Maxxum 7 Maxxum 4 Maxxum 3
Dynax 9 Dynax 7 Dynax 4 Dynax 3
Maxxum 807si Maxxum 700si Maxxum 600si Maxxum 505si
Maxxum 500si Dynax 505si Dynax 500si Dynax Sweets
Maxxum 9000 Maxxum 7000 Maxxum 5000 Dynax 9000
Maxxum 800si Dynax 807si Dynax 800si Dynax 600si
Dynax 7000 Dynax 5000 DiMAGE 7Hi Dynax 700si
DiMAGE 7 DiMAGE 5 Maxxum Sweets Maxxum Sweets
KonicaMinolta
DiMAGE 7i Dynax Sweet
WR-100G compatible with Nikon
Nikon D70S D80
WR-100H compatible with Sigma
Sigma SD-9 SD-10

4
WR-100I compatible with Sigma
Sigma SD14
WR-100J compatible with Olympus
SP-510 UZ SP-550 UZ E400 E410
Olympus E510
Copyright of JJC Technology CO., Ltd

5
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Notes:
The manufacturer is not responsible for and radio or TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the user's authority to operate the equipment.