JJRC X7 User manual

X7 Operation Manual
Google play APP Store
Important
○For your safety and to avoid loss of property, please read this manual carefully.
○Please do not attempt to disassemble, modify or repair the aircraft. If necessary, please contact the agent.
○This manual is concise. For more details, please go to the "Help" in the upper right corner of the APP
main interface and download the electronic documents, or visit www.jjrc.com for more instructions and
tutorials.

Content
I.Important notes -------------------------------------1
1.Flight safety --------------------------------------------1
2.Flight environment -------------------------------------1
3.GPS mode and ight mode ----------------------------2
4.RTH(Return to home) ----------------------------------2
5.Low battery RTH ---------------------------------------2
6.Control loss RTH ---------------------------------------2
7.Compass calibration------------------------------------2
II.Instructions for lithium battery usage ---------------5
1.Usage --------------------------------------------------5
2.Charging -----------------------------------------------5
3.Storage and transportation -----------------------------6
4.Disposal ------------------------------------------------6
5.Maintenance -------------------------------------------6
6.Attention for boarding ----------------------------------6
III.Disclaimer and warnings---------------------------6
IV.Technical support ----------------------------------7
V.Newbie mode --------------------------------------7
VI.Know X7 ------------------------------------------7
1.Aircraft -------------------------------------------------7
2.Remote controller --------------------------------------8
3.Download the APP -------------------------------------9
VII.Preparation before ight ------------------------ 10
1.Battery charging for aircraft -------------------------- 10
2.Remote controller preparation ----------------------- 11
3.Insert TF card ---------------------------------------- 11
4.Propeller installation --------------------------------- 12
5.Battery installation ----------------------------------- 13
VIII.Fly with remote control ------------------------- 13
1.Power on--------------------------------------------- 13
2.Connect with the APP -------------------------------- 14
3.Operate the aircraft----------------------------------- 15
4.Photo and video-------------------------------------- 16
5.Flight mode ------------------------------------------ 17
6.Return to home -------------------------------------- 17
7.Remove the battery and store it separately ---------- 18
8.Pair aircraft with remote controller-------------------- 18
IX.Fly with the APP --------------------------------- 19
1.Power on--------------------------------------------- 19
2.Connect with the APP -------------------------------- 19
3.Initiate aircraft ---------------------------------------- 20
4.Photo and video-------------------------------------- 22
5.Flight mode ------------------------------------------ 22
6.RTH -------------------------------------------------- 24

Fly in Open Area Strong GPS Signal
Strength Within Line of Sight Fly Below 400 feet(120m)
≥4
1
X7 Operation Manual
I. Important Notes
1. Flight safety
(1) This aircraft is not a toy. It is applicable for users of 14 years of age and above.
(2) Please familiarize with the local laws,regulations and ying environment before ying. Stay away from sensitive places, and only
y where it's legal to y a drone.
(3) Please make sure that the aircraft ies within your sight. DO NOT y the aircraft around the obstacles, otherwise it might lead to
accidents.
(4) Please make sure you have the remote controller and the mobile device in your hand so that the aircraft can be controlled at any
time in case of accidents!
(5) Please keep away from the drone when it is in motion.
(6) Please turn off the aircraft and remote controller immediately when it completes ying.
(7) Please strictly comply with the safety rules when using the lithium battery. Never leave the battery unattended while charging to
avoid any accidents.
(8) DO NOT y the drone or use any type of remote controller within a radius of 500 meters of an airport. DO NOT use the remote
controller when and where the radio restrictions might apply.
2. Flight environment
(1) Choose an open area,far away from people,animals,buildings, trees, high-voltage cables and other obstacles etc.
(2) Do not y in bad weather, such as windy, rainy, snowy and foggy weather etc.
(3) Stay away from tall buildings, high-voltage cables, communication base stations and WiFi hotspots, which will severely affect the
signal receiving of the aircraft , resulting in ight accidents caused by abnormal ight data.
(4) Do not contact the propeller in motion, otherwise it may cause
serious injury.Safety is the priority for both you and your surrounding
environment and people. Therefore please familiarize with the no-fly
zone and the safety instructions before ight. Please enter the APP to
see the download disclaimer.

2
X7 Operation Manual
3. GPS mode and ight mode
The aircraft has built-in GPS positioning module, which will be used to position locations in autonomous ight. Follow the steps
herein and the aircraft will enter GPS Positioning Mode:
(1) The remote controller is in P (Position Hold) Mode.
(2) The GPS DOP is at a proper rate for accurate positioning.
At this time, the aircraft can hover and y autonomously.
If any of two conditions is missing, the aircraft would automatically enter the altitude hold mode. However, due to the interference
effect of the wind force, the aircraft might drift while hovering and the functions are not able to use at all.
Notice:Autonomous flight refers to flights that are controlled by internal programming that tells where it is
positioned and where to fly, rather than a person sending radio signals, including,RTH, one key return,way
point flight and point of interest, etc.
4. RTH(Return to home)
When the aircraft enters the GPS positioning mode, the built-in GPS can automatically record its takeoff point as home point. In the
following circumstances, the aircraft will automatically initiate RTH:
Notice:When the aircraft initiates auto return to home, users can only control the function when
it has returned and starts to land.
(1) When the battery level is low, the aircraft would automatically initiate RTH.
(2) When the aircraft is disconnected with the remote controller, the aircraft would automatically initiate RTH
In the RTH mode,if the aircraft ies under 30 meters, it will automatically ascend to the altitude of 30 meters before returning to the
home point and landing. If it ies over 30 meters, it will directly return to the home point and then land on the ground.
During the ight, ensure that the aircraft ies within the line of sight, and do not y around the obstacles (such as buildings,
trees, etc.). Obstacles might block signals, which will lead to the disconnection between the aircraft and the remote controller,
thus triggering the aircraft to enter the RTH mode. This may cause the aircraft to hit an obstacle in the course of RTH and cause
accidents.
5. Low battery RTH
(1) Low battery RTH
During the ight, when the battery level is low, the status indicator light of the aircraft would turn slowly blinking red with a prompt
message from the APP as well. At this point, the aircraft automatically initiates the RTH mode.
Once the low battery RTH mode is enabled, you can only change the landing site but not turn it off.
(2) Critical low battery warning
When the battery level is at a critical low condition, the status indicator light of aircraft would turn quickly blinking red and the aircraft
would immediately land on the ground.
6. Control loss RTH
(1) Control loss RTH with GPS positioning
In the GPS positioning mode,if the signal of the remote controller has been interrupted, the aircraft will hover at the current altitude
for 5 seconds. If the signal has not been reconnected, the aircraft would automatically enter RTH mode.
(2) Control loss RTH without GPS positioning
When the aircraft fails to locate the position and the signal of the remote controller has been interrupted for 2 seconds, the aircraft
would automatically land.
7. Compass calibration
Notice:When changing the flight site, it is necessary to calibrate the compass before the first flight.
During usage , if the aircraft indicates with "alternating flashing blue and green lights", which means that

Preparing to y Position
3
X7 Operation Manual
the compass is abnormal , please re-calibrate the compass.
Please keep away from the environment with magnetic interference when calibrating, otherwise it may
cause calibration failure.
The built-in compass helps keep the aircraft oriented.Please ensure it works well every time before ight.
○Please calibrate the aircraft compass, if one of the following scenarios happen:
(1) Fly at the new ight site;
(2) The aircraft status indicator light indicates the abnormal situation of the compass;
(3) APP and aircraft prompt you to calibrate the compass;
(4) Hovering or drifting in mid-ight.
○Calibrate the compass via the APP:
(1) Enter the calibration mode
When the aircraft and APP are connected, click the"..."icon in the
upper right corner of the APP control interface to enter the "General
Setting" menu.
Then click the "compass calibration" icon.
When APP pops up the prompt, check the current environment and
stay away from metal objects. then click the "calibration" icon.
Meanwhile,the status indicator light on the aircraft's rear arm will
turn blue and red lights ashing alternately, indicating that it has
been ready for calibration.

4
X7 Operation Manual
(2) Compass calibration
Step 1:Horizontal calibration
When the APP prompts you to rotate the aircraft horizontally,put the aircraft in your hand horizontally and then rotate it horizontally
until the status indicator light on the arm of the aircraft turns red and green light ashing alternately (i.e., the horizontal calibration is
successful).
Step 2:Vertical calibration
When APP prompts you to rotate the aircraft with its nose
facing up, hold the aircraft in your hand with its nose facing
up. Place the aircraft on the ground and then rotate it
horizontally.
The compass has been calibrated successfully when the
status indicator light on the aircraft's rear arm turns green
(solid or ashing).
When the APP prompts you with "calibration is successful",
click "Complete" to complete calibration.
If the status indicator light turns red (about 6 seconds),which
means compass calibration fails, please change the position
and re-calibrate.

5
X7 Operation Manual
II. Instructions for lithium battery usage
Warning:Read the entire user manual and familiarize with the functions of the product before proceeding. If
the product is not properly operated, it may cause serious injury, or lead to product damage and property
loss.
This product requires sophisticated pilots with experienced operation. Without a strong sense of safety,
improper operation may lead to damage and property loss, or even serious injury.
This product is not suitable for children. Do not use components that are not provided or recommended
by us. Please strictly comply with the instructions for product installation and usage. This user manual
includes safety, operation and maintenance instructions.
Please read through the instructions and warning tips carefully before assembling, setting up and using
the product. Improper usage, charging or battery storage may cause fire, property loss or personal injury.
It is important to refer to the following instructions for battery usage.
1. Usage
(1) No battery is allowed to be exposed to any liquid. Do not immerse the battery in water or get it wet. Never use batteries in rain or
damp environment. Soaked with water may lead to decomposition, self-ignition, or even explosion.
(2) Do not use non-specified batteries. For replacement, please contact the local retailer for additional information.Using non-
specied batteries may lead to product damage or ight failures, or even cause accidents.
(3) It is strictly prohibited to use batteries that are swollen, leaky, or worn. If any of the above occurs, please contact the sales agent
or local retailer for further processing.
(4) Do not hit the battery. Do not place objects over batteries or chargers.
(5) The battery should be used between ambient temperature of 0 to 40 degrees Celsius. When the temperature is too high (above
50 degrees Celsius), the battery will catch re or even explode. Low temperature (below 0 degrees Celsius) might lead to a
decrease of the battery lifespan.
(6) It is forbidden to use batteries in strong static or magnetic elds. Otherwise, the battery protection board might not work, resulting
in malfunction of the aircraft.
(7) It is forbidden to disassemble the battery or pierce it with sharp objects. Otherwise, it might cause battery ignition or explosion.
(8) The liquid inside the battery is highly corrosive. If there is any leakage, keep away from the battery. If the liquid inside the battery
splashes onto human skin or eyes, please rinse it out immediately with clean water for at least 15 minutes and seek medical
treatment immediately.
(9) If the battery drops or is hit by external force, it must not be used anymore.
(10)If the battery accidentally falls into the water during the ight or under other circumstances, pull out the battery immediately and
place it in a safe open area. At this time, keep away from the battery until the battery is completely dry. Do not use the battery,
and dispose it properly. If the battery catches on re, use solid materials to put out the re, such as sand, blanket, dry powder
and carbon dioxide re extinguishers.
(11)Do not place batteries in a microwave oven or pressure cooker.
(12)Do not place battery cell over the conductor.
(13)No wires or other metal objects are allowed in case of short circuits.
(14)If there is dirt on the battery interface, clean it up with a piece of dry cloth. Otherwise, it might cause contact failure, resulting in
energy loss or charging failure.
2. Charging
(1) The battery must be charged with the specic charger. Charging with a non-specic charger might cause product damage and

6
X7 Operation Manual
even accidents. We will not bear the responsibility for consequences resulting from improper charging.
(2) When charging, please place the battery and charger on the non-ammable and combustible ground (such as cement ground).
Please pay attention to the charging process to avoid accidents.
(3) It is forbidden to charge the battery immediately when the ight completes, with that the battery is not cooled down yet and
charging might lead to a decrease of the battery lifespan. Charge the battery when its temperature approaches to the room
temperature. The ideal charging temperature (5℃ -40℃) can greatly extend the battery lifespan.
(4) After charging, please disconnect the charger from the battery immediately. Regularly check and maintain the charger. Do not
use damaged charger.
3. Storage and transportation
(1) Please store batteries in places where children can't reach. If children accidentally swallow some parts of the product, please
immediately seek for medical help.
(2) It is forbidden to place batteries in direct sunlight or near heat sources, such as cars, fires or heaters. The ideal storage
temperature is 22℃ ~28℃.
(3) Store the battery in dry environment. Do not place batteries in water or where there is water leakage.
(4) Do not impact, crush or puncture batteries.Do not drop or short circuit the battery.
(5) Do not store or transport batteries with spectacles, watches, metal necklaces, hairpins or other metal objects.
(6) Do not transport worn batteries.If necessary,discharge the battery until 30% battery level remains before transport.
(7) If not in use for more than 10 days, please store the battery with 40%~65% battery level remaining, which can extend its
lifespan.
(8) Do not completely discharge the battery if not intended to use it for a long time, as to avoid over-discharging, which will ultimately
disable the battery.
4. Disposal
(1) The battery must be completely discharged before being placed in the recycling bin. Batteries are dangerous chemicals. It
isstrictly prohibited to dispose the battery in regular garbage bins. Please follow the local laws and regulations for battery disposal.
(2) Over-charging batteries are unable to use. Please dispose them.
5. Maintenance
(1) Do not use charger when the temperature is too high or too low.
(2) Do not store batteries when the room temperature reaches above 60 degrees Celsius.
(3) Do not overload the battery, otherwise it might cause damage to the cell.
(4) If the battery is idle for a long time, its performance will be affected.
(5) Recharge and discharge once every 3 months to maintain battery activity.
6. Attention for boarding
(1) Before bringing the battery to the airplane, please discharge the battery until 5% battery level remains.
(2) Please store the battery in a ventilated and dry place.
III. Disclaimers and warnings
This product is not a toy! In the process of using, please adhere to the safety rules. This product is not suitable for children under 14
years of age. Do not expose children to this product. Be careful when using this product in places within children's reach.
For novice pilots, please have an experienced pilot to be supervised for the ight.

e hf
ab c d a
g
7
X7 Operation Manual
Be sure to read this manual carefully before using the product and familiarize with individual rights and responsibilities and related
safety instructions. Otherwise, it may bring about property loss, safety accident and personal injury. Once this product is used, it is
deemed that you have understood, approved and accepted all the terms and conditions of this statement. Users promise to be
responsible for all their consequences and their actions. The user shall undertake the responsibility of using the product for legitimate
purposes and agree with this clause and any relevant policies or guidelines that we may formulate.
IV. Technical support
We guarantee that all products are strictly inspected and tested before coming into the market. Any new information or technology,
we will update on the ocial website.
Users can contact the local distributor to seek for technical support or purchase additional spare parts.
V. Newbie mode
For novice pilot, please turn on the newbie mode. Once the newbie mode is activated, the aircraft will locate its own position before
ready to take off. If the aircraft can not be controlled after take-off, the RTH can be used to allow the aircraft to return automatically.
VI. Know X7
X7 is a ying camera equipped with gimbal and high-denition camera.
X7 features with functions such as way point ying,follow me, RTH,point of interest, one key take-off and landing, etc. It is equipped
with a camera that can adjust the pitch angle, so that you can get a unique perspective and composition, and take unique photos
and videos.
It gives up to 23 minutes of ight time.
1. Aircraft
1) About the aircraft
aCCW Motor/Propeller bGimbal/Camera cCW Motor/Propeller
dTF Slot eAircraft Battery fFlight Status Indicator Light
gMicro USB Port hFront Indicator Light
2) Aircraft indicator light

lm
k
aa
c
g
h
j
b
d
f
i
e
8
X7 Operation Manual
Observe the indicator light to keep track of the status of the aircraft. Please refer to the following instructions of different indicator
lights.
○Optical ow status indicator(Front arm indicator)
Indicator Light Status Indication
▂▂▂▂▂▂▂▂▂▂▂▂ Solid blue light on start-up Self-inspection
▂▂▂▂▂▂▂▂▂▂▂▂ Solid green light RC and aircraft is paired,GPS is located
▂▂▂▂▂▂▂▂▂Flashing green light RC and aircraft is paired,GPS is not located
▂▂▂▂▂▂▂Blue and red light ashing alternately Horizontal calibration process
▂▂▂▂▂▂▂Red and green light ashing alternately Vertical calibration process
▂▂▂▂▂▂▂▂▂Flashing blue light No RC signal
▂▂▂▂▂▂▂▂▂▂▂▂ Solid blue light RC and aircraft is not paired,GPS is located
▂▂▂▂▂▂▂▂▂▂▂▂ Solid red light Serious error
▂▂▂▂▂▂▂▂Double-ashing red light Serious low battery level
▂▂▂▂▂▂▂▂▂Flashing red light Low battery level
▂▂▂▂▂▂▂Blue and green light ashing alternately Compass data error
2. Remote controller
1) Console
aAntenna bFlight Mode Switch cRTH dMode Indicator Light
ePower Indicator Light fLeft Joystick gRight Joystick hPower
iOne Key Takeoff/Landing jPhoto/Video kMobile Device Holder lUSB Port
mGimbal Adjustment

Google play APP Store
9
X7 Operation Manual
2) Power indicator light
○Charging(Turn off the remote control before charging.)
Indicator Light Status Indication
▂▂▂▂▂▂▂▂▂Flashing green light Charging
▂▂▂▂▂▂▂▂▂▂▂▂ Solid green light Charging completed
○In operation
Indicator Light Sound Status Indication
▂▂▂▂▂▂▂▂▂▂▂▂ Solid green light Null RC is working normally
▂▂▂▂▂▂Slowly ashing red light B-B- B-······ Low battery warning,please charge RC immediately
▂▂▂▂▂▂▂▂▂Quickly ashing red light B-B-B-······ Serious low battery warning,RC will automatically turn off when
the sound stops
▂▂▂▂▂▂▂▂▂▂▂▂ Solid red light Null Serious error
▂▂▂▂▂▂▂▂Double-ashing green light BB-BB-BB-······ Idle time is more than 5 minutes,after the operation of the RC,
the sound will disappear automatically.
3) Mode indicator light
Indicator Light Sound Status Indication
▂▂▂▂▂▂▂▂▂▂▂▂ Solid green light /GPS mode
▂▂▂▂▂▂Slowly ashing green light B-B- B-······ Altitude hold mode
3. Download the APP
Please connect the APP before using this product. It is able to use the APP to manipulate the ight and the gimbal and the camera,
and control functions such as taking photos or videos and other settings.
Scan the following QR code to download APP
Notice:For more details on how to control the aircraft via the APP, please refer to"Fly via the APP" in this
manual. When using the APP, users need to make sure that mobile phone supports 5G WiFi, otherwise the
aircraft is unable to connect with the phone.

Green light flashing(Charging)
Green light turns solid(Charging completed)
Charger
USB charging cable
Battery
USB adapter
Household power socket
10
X7 Operation Manual
VII. Preparation before ight
1. Battery charging for aircraft
(1) Connect USB adapter with the aircraft battery.
(2) Connect the power cord with the charger at one end and plug in the socket at the other end.
(3) Insert the aircraft battery into the charger with the battery line well connected.
○Charger status
Warning:In order to avoid possible damage and loss, it is important to use specific battery and charger.
Please charge in a well ventilated environment and ensure that the charging device is far away from the
heat source.
When charging, please place the battery and charger on the non-flammable and combustible ground (such
as cement ground).
Please pay attention to the charging process to avoid accidents.

a.Expand the antenna to each side b.Insert the bracket into the slot on the back of the remote controller
Indicator Light
Green light flashing(charging)
Green light turns solid(charging completed)
Household power socketUSB adapter
USB charging cable
c.Mount the phone to the phone holder d.Adjust the phone and antenna until the phone is fixedly mounted
Insert TF card into card slot
11
X7 Operation Manual
2. Remote controller preparation (If using the APP, please skip this step)
1) Before ying, please follow these steps to get the remote controller ready for ight
2) Battery charging for remote controller
Long press power button on remote controller to turn on the remote controller.The indicator light turns solid green when the battery
level is high, and turns ashing green when the battery level is low. When at a low battery level, please recharge the battery in
compliance with the following steps:
Warning:Disconnect the charging cable while using the remote controller.
3. Insert TF card
Caution: Do not install or remove the TF card when aircraft is powered on, otherwise, the data storage will be
affected.

1) Assemble propeller A onto motor A (motor
with concave points on the shaft end).
2) Screw the silver fixing nut of the propeller
into the motor shaft, and rotate the nut
counterclockwise.
3) Screw the silver fixing nut of the propeller
with open spanner counterclockwise.
1)Assemble propeller B onto motor B (motor
with concave points on the shaft end).
2)Screw the black fixing nut of the propeller
into the motor shaft, and rotate the nut
clockwise.
3)Screw the black fixing nut of the propeller
with open spanner clockwise.
Arm A is equipped with
propeller A and a silver
blade fixing nut. Rotate
counterclockwise to lock the
nut,rotate clockwise to unlock
the nut.
Arm B is equipped with propeller B
and a white blade fixing nut. Rotate
clockwise to lock the nut,rotate
counterclockwise to unlock the nut.
Arm B is equipped
with propeller B and a
white blade fixing
nut. Rotate clockwise
to lock the nut, rotate
counterclockwise to
unlock the nut.
Arm A is equippedwith
propeller A and a silver
blade fixing nut. Rotate
counterclockwise to lock the
nut,rotate clockwise to unlock
the nut.
12
X7 Operation Manual
4. Propeller installation
1) Install propeller on arm A
2) Install propeller on arm B
3) Propeller installation completed

13
X7 Operation Manual
5. Battery installation
1) Install
Insert the battery into the battery compartment as shown.
2) Take out
Press the lock button on both sides of the battery as shown,then take the battery out of the compartment.
VIII.Fly with the remote controller
1. Power on
1) Put the aircraft on a fat surface
2) Turn on aircraft
Long press the power button for 2 seconds.

Indicator light turns from
flashing blue to flashing
green or solid green.
09:5 9
WLAN
Drone- xxxxxx
CHOOSE A NETWORK...
14
X7 Operation Manual
3) Self-inspection and pairing
Power on the put the aircraft on at ground for about 30seconds for self-inspection. When the aircraft's indicator light turns from
ashing or solid blue to ashing green or solid, the aircraft has successfully paired with the remote controller.
2. Connect with the APP
1) GPS signal status with the aircraft connected with the APP
When the APP is connected to the aircraft and the indicator light of the aircraft turns solid green,indicating the GPS is located
successfully,switch ight mode to GPS mode to get ready for takeoff.
When the APP is connected to the aircraft and the indicator light of the aircraft turns ashing green,indicating GPS signal strength is
weak or no signal, switch ight mode to altitude hold mode to get ready for takeoff. It requires experienced skills for operation when
in altitude hold mode.
Notice:Set the drone up and get ready to take off after the aircraft's indicator light turns solid green (indicating
good GPS signal strength).
Please choose an open and spacious eld. Tall steel structures and metal materials will interfere the
compass and GPS.
2) Connect with the APP
Open the APP,click WLAN setting,
and click "Drone-xxxxxx"
Open the APP,enter the main interface shown in the left image below,and click the "start ight" on the interface to enter the interface
shown as the right picture:
Notice:The aircraft can only connect to 5G Wi-Fi enabled mobile phone.
Use the APP to monitor the real-time footages and the current state of the aircraft.
It is able to use both of the remote controller and the APP to control the aircraft. However, some functions
are not supported on the APP when the controller being used, such as taking photos or videos, follow me mode,
point of interest mode or waypoint flying mode.

Left Joystick Ascend
Descend
Left Rotation Right Rotation
Right Joystick Forward
Backward
RightLeft
15
X7 Operation Manual
The APP can only be used when the remote controller turns off. For more details, please refer to the "Fly with the
APP" below in this manual.
3. Operate the aircraft
1) Takeoff
○Method 1: take off manually
When the aircraft's light turns from blue to green (shown as the
right picture), toggle the left and right joysticks outward for at
least 3 seconds (shown as the picture) as to get the propellers
started to rotate.
Slowly toggle the throttle joystick upward to control the aircraft to
take off quickly, and then toggle again to make it ascend slowly.
○Method 2: one key take off
Long press the "One Key Takeoff/ Landing" button for 2 to 3
seconds. When the remote controller beeps steadily, the aircraft will automatically take off and ascend to the altitude of 1.2 meters
and hover.
2) Landing
Please be aware of the crowds or obstacles and ensure the aircraft is hovering over the landing site before landing. Choose an open
and at space as your landing site.
○Method 1: land manually
Slowly toggle the throttle joystick to control the aircraft to land. When the drone lands on the ground, continue to toggle the joystick
towards the lowest position until the propellers stop rotating.
○Method 2:one key land
Long press the "One Key Takeoff/ Landing" button for 2 to 3 seconds. When the remote controller beeps steadily, the aircraft will
land vertically.
3) Remote controller joystick instruction
(1) Mode 2

a b c a bc
Ascend
Descend
Right Joystick
RightLeft
Left Joystick
Left Rotation Right Rotation
Forward
Backward
Video
Photo
Album
Short press the button to take
photos and long press to take
videos. You can also short press
it to take a snapshot when a
video is running in.
Preparing to y Position Hold
16
X7 Operation Manual
(2) Mode 1
4) Switch to mode 1 or mode 2
(1) Switch to mode 2
Toggle the left joystick ①to the lowest position and press the "One Key Takeoff/ Landing" button ②at the same time. Then turn
on the remote controller ③. Release the joystick ①and the button ②to enter Mode 2.
(2) Switch to mode 1
Toggle the right joystick ①to the lowest position and press the "Photo/ Video" button ②at the same time. Then turn on the
remote controller ③. Release the joystick ①and the button ②to enter Mode 1.
4. Photo and video

17
X7 Operation Manual
During the ight, you can use the "Photo/ Video" button to take image or video footages.
Short press the "Photo/ Video" button and wait until the remote controller beeps, indicating that you have successfully taken a photo.
Long press the "Photo/Video" button and wait until the remote controller beeps steadily, with the APP icon changes from white to
red, indicating it has been ready for video shooting. Long press the button again and wait until the remote controller beeps steadily,
with the APP icon changes from red to white, indicating it has stopped recording.
○Aerial photography tips
(1) Check the condition of all parts before ight.
(2) Take photos or vides when the drone is in position hold mode.
(3) Shoot on sunny and breezy days.
(4) Slightly toggle the joystick in mid-ight as to ensure a smooth ight.
Note: In order to avoid possible damage or loss,please ensure that the camera is free to rotate. High
temperature may cause damage to the camera and even cause injury.
5. Flight mode
1) Position hold mode
○How to enter position hold mode
a. Default ight mode is GPS mode.
b. When the drone is in altitude hold mode and the GPS positioning system is working well, long press the button on the remote
controller to switch to position hold mode.
○Indicator light status of the aircraft and the remote controller
The left indicator light on the controller turns solid green.
○Notice
In position hold mode, the aircraft will automatically position its own location and hover steadily. Please choose an open and wide
outdoor eld before ight, and wait until the GPS has been turned on before ying it.
2) Altitude hold mode
○How to enter altitude hold mode
When aircraft is in position hold mode,long press mode switch button to switch to altitude hold mode.
○Indicator light status of the aircraft and the remote controller
The left indicator light on the controller turns ashing green.
○Notice
The aircraft in altitude hold mode requires pilots with experienced operation skills. However, certain environmental factors, such as
airow, might affect the ight, resulting in drifting or hovering failure.
Please familiarize with the position hold mode and learn how to handle it before using altitude hold.
Note: As for the return to home point as precise as possible, please fly the aircraft in open flat terrain (no tall
buildings in 50 meters of radius, flat terrain in 10 meters of radius) with the GPS working well. Thus the
return to home function will be able to activate.
6. Return to home
In GPS positioning mode, you can press the "One Key Return" button to return the aircraft. Do not control any functions during the
process of return or ascent. When the aircraft is landing, you can toggle the joystick as to control it to land on your desired location.
When the aircraft is returning to home point, long press the "Return" button to exit auto return mode.

Turn off aircraft:short press,then
long press over 3seconds Turn off RC
Forward
Left Right
Forward/Backward
Backward
18
X7 Operation Manual
Note: As for the return to home point as precise as possible, please ensure the GPS positioning function has
been turned on to record the aircraft's position before its takeoff and choose an area with no obstacles.
With the GPS positioning mode turned on, it will automatically enter auto return to home mode if the remote
controller loses control.
Once the auto return to home mode is enabled, if the aircraft flies below 30 meters of altitude, the aircraft
will automatically ascend to 30 meters before returning to home point. However, if the aircraft flies over 30
meters of altitude, the aircraft will return to home point at the current altitude. Please do not control other
functions during the process of return. Please ensure there are no obstacles in way of return in case of any
potential accidents.
After the aircraft lands and the propellers stop rotating, long press the power switch for over 2 seconds to turn off the aircraft and
the remote controller.
Caution:Please stay away from aircraft until propellers stop rotating completely.
7. Remove the battery and store it separately
(1) When nishing ight,please remove the batteries from the aircraft and remote controller and store them separately.
(2) Keep batteries out of the reach of children. Keep the battery dry. DO NOT leave the battery near heat sources such as a furnace
or heater. The ideal storage temperature is 22℃-28℃.
(3) If a battery is found to be damaged,please discharge the battery and dispose them properly according to the local regulations
and laws.
8. Pair aircraft with RC
The aircraft has already paired with the remote controller by default. If the remote controller has been replaced with a new one,
please pair again complying with the following steps: