JLA JD-1000 User manual

JD-1000
DC Ceiling Fan
User Manual
Cautions
◉Please read this manual carefully before
installation and use.
◉Upon completing the installation,
please make sure to hand this manual
to the customer.
Warranty Card
Storage
Warning
Specification
Adapter
▪Before cleaning and maintenance, make sure the fan stops
properly and unplug the AC power source.
▪Do not use toluene, bleach, hard brushes and other chemical
solvents of cleaning as to avoid scratches or corrosion on body
and appearance.
▪Use soft cloths with mild detergent to clean the body.
▪Do not rinse the body directly to avoid conduction and shot
down.
▪Do not be close to fire in order to avoid deformation of plastic
parts and burned.
▪Do not turn the maximum speed immediately when just
operate, otherwise the motor protection might turn ON
inadvertently.
▪Please clean periodically, otherwise, a large accumulation of
dust on the fan may cause the motor over-heating and
over-shoot oscillation.
▪Do not use chemicals such as gasoline, benzene, alcohol,
detergents etc. to clean the fan.
▪Do not hang items on it and do not pull the outer case in order
to protect the parts inside the fan.
▪Please be sure not to let children play with this product to avoid
accidents.
Warranty Coverage：
▪The warranty period is one year from the purchased date. If weren’t bought
from dealers, the warranty is based on the date of manufacture plus two
months.
▪This warranty card is needed when repairing the products.
▪If the product doesn’t operate properly when using the product according to
the instruction, the repair/replacement will be FREE of charges.
Reasons would cause the invalidated of warranty:
▪External software and hard ware peripherals installed.
▪Environmental factors( ex: natural disasters, insects, rodents and etc.
▪Doesn’t follow the instruction.
▪Un-authorized modification.
▪External factors such as voltage misuse, improper device handling collisions,
foreign invasion, chemical damaged and etc.
▪Serial number or model number are different.
Warning：
▪Pay on delivery
▪This warranty is only for Taiwan.
▪Warranty card is needed.
▪Repair fee is needed if the product is out of warranty.
Product DC Ceiling Fan
JD-1000
110V / 220V
60Hz
18W
33dB
3
3.5kg
W600×D600×H182mm
2 hrs
Style No.
AC Voltage
Frequency
Power Condumption
Low Noise
Fan blade numbers
Weight
Dimensions
Timer
AC Voltage 100V~240V / 0.7A
50~60Hz
24V / 1.25V
Frequency
Output Power
Dear customer,
Thank you for choosing JLA!
To protect your rights, please fill the follwing information properly
and keep this card.
Item Name: Model No: Dealer stamp
Serial No:
Date of purchase:
Invoice No:

Side View
4 Screws
Body+ Fan Blade Plastic Nets
Color Sheet
Parts Drawing
Remote Spec.
600 mm
580 mm
Ceiling
300 mm
Frame
Outside
Frame
Inside
on
Time
A
B
C
D
Remote control (7speeds with timer)
When the red LED lights up, it means it
would close automatically in two hours.
The timer limited is two hours. Press
repeatedly to turn off the timing setting.
AssemblyInstallaion
▪A
▪B
▪C
▪D
▪A licensed electrician is required.
▪Fan position needs to be at least 2.3
meters height from ground.
▪Self-assembly is required.
▪Do not plug power before assembling the product
in order to avoid any possibility of risks.
▪Do not install this product too close any nearby air
vent in order to avoid Wind Whirlpool.
▪Keep 300mm space between the FAN
and Ceiling.
▪Connect the adaptor with AC source
to start the product.
Speed Up
Speed Down
ON/OFF
Timer
Assembly sequence:
Follow the pictures at
right hand side.
1. Put the colored
plastic sheet. (Mat
surface faces to
users.)
2. Set the plastic nets
sheet.
3. Set 4 screws.