JLab JBuddies Pro Wireless User manual

CHARGING
Connect the USB-C cable to computer
or USB 5V 1A (or less) output device.
JBUDDIES PRO WIRELESS HEADPHONES
FIRST TIME SETUP: BLUETOOTH PAIRING
Notes:
•Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.
The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
•Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
Select “JBuddies Pro” in your device
settings to connect.
Bluetooth
JBuddies Pro
Settings
3
When the JBuddies Pro
Wireless Headphones are
powered off, press and hold
the Power Button for
approximately 10 seconds.
Fast blinking red and blue
light indicates searching
for Bluetooth device.
2
Turn on the Bluetooth
in your device settings.
Bluetooth
Settings
1
When the headphones
are paired, voice prompts
“You are connected”
and blue light will
flash slowly.
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected]
or visit jlab.com/contact
REGISTER TODAY
jlab.com/register
Product updates | How-to tips
FAQs & more
CHARGING
FULLY CHARGED

CONTROLS
VOLUME UP /VOLUME DOWN: 1 Click
TRACK FORWARD /TRACK BACKWARD: 2 Second hold
BLUETOOTH PAIRING:
(Follow First Time Setup: Bluetooth Pairing)
POWER ON /OFF: Press and hold 3 seconds
(Slow blinking blue light indicates power is on)
PLAY /PAUSE /ANSWER /HANG UP CALLS: 1 Click
ACTIVATE SIRI (iOS) OR “OK GOOGLE” (ANDROID): 2 Clicks
RE-PAIRING AND ADDITIONAL DEVICES:
When power is off, press and hold 10 seconds
Connect the included AUX CABLE to either side to another
JBuddies Pro or any other wired headphone/earbud
for Share Mode.
SHARE MODE
OPTION 1:
OPTION 2:
Connect the AUX CABLE to a
device for a wired connection.
GO WIRED
VOLUME + TRACK CONTROL
VOLUME LIMITER
SWITCH 85DB / 95DB
(INSIDE FABRIC)
POWER ON /OFF
CHARGING PORT
AUX INPUT /OUTPUT
INDICATOR LIGHT
EITHER
SIDE
EITHER
SIDE
Microphone should be installed on
JBuddies Pro AUX input side to use.
EITHER
SIDE WITH
PLAY /PAUSE /ANSWER /
HANG UP CALLS: 1 CLICK
TRACK FORWARD: 2 CLICKS
TRACK BACKWARD: 3 CLICKS

JLAB.COM
CAUTIONS
• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.
Shop products |Product alerts |Burn-in your headphones
JLab Store + Burn-in Tool