JLab Studio Pro ANC Wireless User manual

STUDIO PRO ANC HEADPHONES
FIRST TIME SETUP: BLUETOOTH PAIRING
Notes:
•Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.
The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
•Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
32
Turn on the Bluetooth
in your device settings.
1Press and hold button for 8 seconds.
Release. Lights will flash blue/red.
Select “JLab Studio Pro ANC” in your
device settings to connect.
PAIRING NEW / ADDITIONAL DEVICES:
Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device.
Repeat FIRST TIME STEUP process for new devices.
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected]
or visit jlab.com/contact
REGISTER TODAY
jlab.com/register
Product updates | How-to tips
FAQs & more
Bluetooth
Settings
Bluetooth
Settings
JLab Studio Pro

CHARGING
BUTTON FUNCTIONS
POWER ON /OFF: Press & hold 2+ seconds
PLAY /PAUSE /ANSWER /HANG UP CALLS:
Press once
REJECT INCOMING CALL: Press & hold 1 second
ACTIVATE SIRI (iOS) OR “OK GOOGLE” (ANDROID):
Press twice
BLUETOOTH PAIRING: See FIRST TIME SETUP
VOLUME UP: Press once
TRACK FORWARD: Press & hold 2+ seconds SWITCH EQ:
Press and hold both buttons
simultaneously for 3+ seconds
VOLUME DOWN: Press once
TRACK BACKWARD: Press & hold 2+ seconds JLab SIGNATURE
(One Beep)
JLab C3™ signature sound
with amplified vocals and bass
BALANCED
(Two Beeps)
Even sound with no additional
sound enhancements
BASS BOOST
(Three Beeps)
Amplified bass and sub-bass
NOISE CONTROL
ON
CONNECTED TO BLUETOOTH:
CYCLE BE AWARE / ANC HIGH / ANC LOW / ANC OFF:
Press once
CONNECTED TO AUX:
Press and hold 2+ seconds to power ON ANC.
CYCLE BE AWARE / ANC HIGH / ANC LOW / ANC OFF:
Press once
ACTIVE NOISE CONTROL
CHARGING
CABLE
OR
FULLY
CHARGED
CHARGING
Connect to computer
or USB 5v 1A (or less)
output device.

JLAB.COM
CAUTIONS
• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.
Shop products |Product alerts |Burn-in your headphones
JLab Store + Burn-in Tool
AUX INPUT
AUX INPUT
CABLE
Plug into in-flight media entertainment
or play without battery power
NOTE:
• The ANC function can work when connected with AUX INPUT. Press and hold 2+ seconds the ANC button to power ON ANC.
• The AUX INPUT will override your Bluetooth device connection. Unplug and press power button 2+ seconds to revert back to Bluetooth.
• The button functions for your Bluetooth device will not work when AUX INPUT is connected.
• The volume will be dependent on your AUX device settings. Adjust accordingly.