JLab Play Pro Wireless User manual

PLAY PRO GAMING WIRELESS HEADSET
FIRST TIME SETUP: BLUETOOTH PAIRING
Notes:
•Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.
The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
•Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
Select “JLab Play Pro” in your
device settings to connect.
32
Turn on the Bluetooth
in your device settings.
1When the Play Pro Wireless Headphones
are powered off, press and hold the Power
Button for approximately 8 seconds.
Fast blinking red and blue light
indicates searching for Bluetooth device.
PAIRING NEW / ADDITIONAL DEVICES:
Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device.
Repeat FIRST TIME STEUP process for new devices.
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected]
or visit jlab.com/contact
REGISTER TODAY
jlab.com/register
Product updates | How-to tips
FAQs & more
Bluetooth
Settings
Bluetooth
Settings
JLab Play Pro

CHARGING
Connect the USB Type C charging cable (included) to the
headphone and connect to a computer or USB 5v/1amp
output device (not included). Make sure the USB connection
has a power output source.
Solid red light indicates the headphone is charging.
Solid blue light indicates charging is complete.
CONSOLE +MOBILE GAMING
BUTTON FUNCTIONS
FULLY
CHARGED
CHARGING
POWER ON /OFF:
Press & hold 2+ seconds
PLAY /PAUSE /ANSWER /
HANG UP CALLS: Press once
REJECT INCOMING CALL:
Press & hold 1 second
ACTIVATE SIRI (iOS) OR
“OK GOOGLE” (ANDROID):
Press twice
BLUETOOTH PAIRING:
See FIRST TIME SETUP
VOLUME UP: Press once
TRACK FORWARD:
Press & hold 2+ seconds SWITCH GAMING /MUSIC EQ:
Press and hold 1+ second both
buttons simultaneously
GAMING: 1 Beep
MUSIC: 2 Beeps
VOLUME DOWN: Press once
TRACK BACKWARD:
Press & hold 2+ seconds
GAMING
Increased mid-high frequency
response for clear vocals and
spacial awareness
MUSIC
Amplified vocals and bass
for enhanced music listening
MICROPHONE ON:
Press OUT (blue ring)
MICROPHONE OFF
(MUTE):
Press IN (no blue ring)
RETRACTABLE
BOOM
MICROPHONE
OR
AUX INPUT
CABLE
HEADPHONE
VOLUME WHEEL
(Adjust your console
volume accordingly)
NOTES:
• When using the AUX INPUT, the microphone
and game volume will also be determined by
your console settings. Adjust accordingly.
• The boom microphone and mute function
works in both Bluetooth and AUX INPUT modes.
• The button functions on the headphone ear
cup will only work in Bluetooth mode.

JLAB.COM
CAUTIONS
• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.
Shop products |Product alerts |Burn-in your headphones
JLab Store + Burn-in Tool
SETUP with PC (Windows 7, 8, or 10):
1. From the Start Menu, select the Control Panel.
2. Select Hardware and Sound category.
3. Select the Sound category.
4. The Playback tab should show JLab Play Pro Headphones connected as the Default Device.
5. Click the next tab that says Recording.
6. Right click the JLab Play Pro Headphones icon and select “Set as Default Device”.
7. Click OK box to save changes.
SETUP with MAC (macOS 10.1 and higher):
1. Open System Preferences and select the Sound icon.
2. Select the Input tab and select “JLab Play Pro”.
3. Select Output tab and select “JLab Play Pro”.
4. From this screen, set the Output volume to desired level.
5. Closing out of the window will save settings.
PC / MAC SETUP IF CONNECTED TO BLUETOOTH
MULTIPOINT (CONNECT 2 DEVICES SIMULTANEOUSLY)
JLab Play Pro Connect
Once FIRST device is connected,
turn off Bluetooth in device settings.
Play Pro will auto enter Bluetooth Pairing.
Enter your SECOND device Bluetooth
settings and connect to JLab Play Pro.
1 2
Bluetooth
Settings
JLab Play Pro Connected
Bluetooth
Settings
JLab Play Pro
Enter your FIRST device settings.
Turn on Bluetooth and reconnect to Play Pro.
3
For more info and troubleshooting on MULTIPOINT visit: JLAB.COM/SUPPORT