Jmaz Lighting Crazy Par Hex 7 User manual

User Manual
LP76S
WWW.JMAZLIGHTING.COM
Crazy Par Hex 7

Menu
DMX Mode
Channel slection mode
Master/Slave mode
Performance mode
Backlight mode
show positive and negative direction
manual mode
Auto-test
Machine using time
5

Performancemode
Select the Shnd menu,press the ENTER key to determine.To use DOWN/UP button to
performace mode:FADE(Gradient),SOUN(Sound),Auto(Automatic),COLOR(Color)
mode,Select the desired mode,press ENTER to determine and save.Not to make any
changes,wait a minute to automatically exit the menu and save.The main menu,
please press the MENU Button FADE(Gradient)SP 1-SP 8 8 fades speed selection.use
DOWN/UP button to select the gradient speed required.according to ENTER,determine
and save.Not to make any changes,wait a minute and automatically exit the MENU
and save.The main menu.plase press the MENU button Color(Color)CO 1-CO 16 16
program mode,And also press Stro(Strobe) have 0-255 to adjust the speed,use the
DOWN/UP button to select the desired mode.Press ENTER to determine and ave.
NOT to make any changes,wait a minute to automatically exit the menu and save.
Master/Slavemode
Select the SLnd menu, press the ENTER key to confirm. To use the DOWN/UP key set of
Master-Slave mode need: NAST(master.SL 1(Slave 1).SL 2(Slave 2).SL 3(Slave 3).
SL 4(Slave 4). Select the desired mode, press ENTER to determine and save. Not to
make any changes, wait a minute to automatically exit the menu and save. The main
menu, please press the MENU button
DMXMode
Select the Addr menu, press the ENTER key to confirm. Then use the initial address code
DOWN/UP button to set this light (A001 ~ A512). Once you have set your initial address
code, press ENTER to define and save. Not to make any changes, wait a minute to
automatically exit the menu and save. The main menu, please press the MENU button
Channelselectionmodel
Select the Chnd menu, press the ENTER key to determine. To use the DOWN/UP button
to channel mode: 6Ch (6 Channel).10Ch (10 Channels) mode. Select the desired channel
mode, press ENTER to determine and save. Not to make any changes, wait a minute to
automatically exit the menu and save. The main menu, please press the MENU button
6

Backlightmode
Select the LED menu, press the ENTER key to determine. Then use the DOWN/UP button
to set the backlight mode: ON (Open).OFF (Close). Select the desired mode, press ENTER
to determine and save. Not to make any changes, wait a minute to automatically exit
the menu and save. The main menu, please press the MENU button
White Balance
Select the BALA menu,Press the ENTER key to determine.To use the DOWN/UP to display
mode:Red(Red),Gree(Green,Blue(BLue),select the desired mode,Press ENTER to
determine and save.Not to make any changes,Wait a moment to automatically
exit the menu and save.The main menu,Please press the MENU button Red(Red)
with 125-255 using the DOWN/UP button to brightness.Press ENTER to define and
save.Not to make any changes,wait a minute to automatically exit the menu and
save.The main menu,Please press the MENU button Gree(Green) with 125-255
using the DOWN/UP button to brightness.Press ENTER to define and save.Not to
make any changes,wait a minute to automatically exit the menu and save.
7
showpositiveandnegativedirection
Select the dISP menu, press the ENTER key to determine. To use the DOWN/UP button to
display mode: dISP (positive).DSIP (reverse). Select the desired mode, press ENTER to
determine and save. Not to make any changes, wait a minute to automatically exit
the menu and save. The main menu, please press the MENU button

11
Following are some common problems and common soluons.
Problem:
The light will not turn on.
Soluons:
Check to ensure the power cord is connected to a power outlet.
Check to ensure that the connected outlet has available power.
Problem:
The light will not execute DMX instrucons.
Soluons:
Check to ensure that the light is connected to the controller via a DMX cable.
Check to ensure that the DMX chain is properly terminated.
Check to ensure that the DMX cable is good; swap out a known good cable to test.
Check to ensure the light is in DMX mode (001 ~ 512).
Check to ensure the DMX controller is operang properly.
If you experience other problems with this light and cannot solve themon your own, please contact JMAZ
Lighng Technical Support for assistance.
Troubleshoong
JMAZ Lighng is pleased to provide free, live, online technical support toassist you with any quesons
you may have about installaon, setup,troubleshoong, or product recommendaons. If you ever need
assistance with your new product, please come online to talk to one of our friendly and knowledgeable
Tech Support Associates. Technical support is available through our website www.jmazlighng.com. You
can also get assistance through email by sending a message to support@jmazlighng.com
Technical Support
The JMAZ Lighng Customer Service department is dedicated to ensuring that your ordering, purchasing,
and delivery experience is second to none. If you have any problem with your order, please give us an
opportunity to make it right. You can contact JMAZ lighng Customer Service representave via email
support@jmazlighng.com or call us at [phone].
Customer Service