Jmaz Lighting Fantastic Beam 260 User manual

1
260 Beam Moving head light
WEIGHT：16.4KG
COLOR TEMPERATURE：8400 K

2
ITEM
Item...........................................................................................................................02
1.Product introduce ................................................................................................03
2.Fixture size............................................................................................................03
3.Parts introduce.................................................................................................... 04
4.Safety information...............................................................................................05
5.Packing and shipping .........................................................................................06
6. Installation standards ......................................................................................... 07
7.AC power.............................................................................................................. 08
8. Lamp model and replace...................................................................................08
9.Control panel operate..........................................................................................10
10.DMX Channels.....................................................................................................11
11.Routine maintenance..........................................................................................14
12.Simple troubleshooting.......................................................................................14
STATEMENT
The product is good packing when ship out the factory. All users should strictly abide by the
warnings and instructions stated in this manual, any damage and results due to misuse and the
neglect of this operating manual will be excluded from the deal responsibility this manual will not
informed in additionally if have technical changes.
1. PRODUCTION INTRODUCE
Thank you for choosing this NEX260 products, this model is the moving head light
which is the latest development of the smart, efficient products, beautiful shape, smooth R &

3
D, combined with the advanced technology of today's stage lighting products with
international advanced electronic control technology and excellent user-friendly industrial
design , fully comply with CE standard, accepted international standard DMX512 signal
mode.
260 Beam use efficient lamp and short distance condenser system, coupled with the
high-quality optical lens components, Gorgeous color and clear gobos, sharp and uniform
output light. Chinese/English language selected.
Operate menu intuitive and fast; The display can be inverted 180 °. DMX512 channels
optional . Horizontal scan: 540 °vertical scanning 270 °.
Production enforce standard GB7000.1-2015,GB7000.217-2008 and GB17625.1-2012.
Channels mode :16CH
lamp：BORYLI MSD R9 lamp 260 /YODN MSD 260 R9
Lamp Color Temperature：8400K
Lamp lifespan：2000hours
Power: 110-240V,50/60Hz;PF≥0.95
Total power:380W
Display: 1.7 inch Screen display；
Color:14colors+white
Fixed gobo: 14gobo+white
Prism:16 facet prism+3 layer prism .Two prism can overlay:
Colorful prism effects.
Beam angel:4°;
Pan: 540°,8/16Bit; Tilt: 270°,8/16Bit;
IP Rate: IP20;Product size: 367.6x267x539.8mm;
Carton box：585*465*425mm
N.W：16.44Kg
2 FIXTURE SIZE 367.6(L)x267(W)x539.8(H)mm

4
3.PARTS INTRODUCE
02
03
04
05
07
NEX260 each part of product structure and main composition product name description for better
know the light unit.
4. SAFETY INFORMATION
01 —Lens
02 —Body
03 —Arm
04 —Tilt Lock
05 —Pan Lock
06 —Ligh base
07 —Handle
01
02
01
03
04
02
05
01 —LCD display
02 —Control whell
01 —DMX In
02 —DMX Out
03 —Power Switch
04 —Power In
05 —Fuse
06
01

5
4.1.1 SAFETY WARNING MESSAGE
This product is only suitable for professional use, and does not apply to security for other purposes.
After you got the lights, please check the package whether have any damage caused by
transportation. If there is any damage, do not use this fixture, and please contact the dealer or
manufacturer as soon as possible.
This product is only suitable for indoor, IP20 protection class. Lamps should be kept dry to avoid
Moisture, overheating or dusty environment. Prevent lamps come into contact with water or any
other liquid.The use of this product should pay attention to: fire, heat, electric shock, ultraviolet
radiation, the lamp to explode or
Shedding caused serious or fatal injury.
4.1.2 NEED TO READ THE INSTRUCTIONS BEFORE USE ENERGIZED OR
INSTALLING
Follow through the operation of security methods and pay attention to the warning signs on the
specification and equipment. If you have any problem for how to safely operate the equipment.
Please contact your dealer.
4.1.3 LAMP
The fitting mounts a high-pressure lamp that needs an external. Immediately replace the lamp if
damaged or deformed by heat .The light source in this fixture shall be replaced by the
manufacturer or its service agent or similar qualifcation. Always disconnect from mains before
replacing the lamp.
4.1.4 OPERATION IS PROHIBITED
In automatic mode do not manually force the equipment or light
4.1.5 POINTING IS PROHIBITED
Never point the lights directly to the sun or other strong light source.
4.2 TO PREVENT FALLING WOUNDING
Please don’t move the package by one person only.
When Hang the fixture, please must verify that the facilities to be able to withstand the weight of
the lamps at least 10 times more.

6
Please make sure the Mounting hardware is strong enough no any damage, and insurance for the
safety rope as auxiliary security fixed in other facilities will need to verify before installation.
Installing or removing the equipment, to make the pulley below the work location.
4.3 UA PROTECTION AND THE BULB EXPLOSION
Prohibit straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any damage to rupture
The Fixture should be used with the protection screen together.
4.4.1 ANTI-HIGH TEMPERATURE (Rated maximum ambient temperature)
ta =40°C
Please don’t use the equipment if the temperature above 40℃
4.4.2 ANTI-HIGH TEMPERATURE （Maximum outer surface temperature）
4.5 IP PROTECTION
The product are certified at IP 20 levels only. Adequate additional protection should be taken for
outdoor use. All lamps, lights and their fittings should be kept dry. Overheating dust and excessive
humidity must be avoided.
4.6 BURST PREVENTION
The lens should be changed if had damaged or any problems. Don’t change the non-original
manufacturer lens
Len size：￠145*24mm
4.7 PREVENTION OF ELECTIC SHOCK
The electrical connection must only be carried out with corresponding qualifications;
Before installing, make sure you use the power voltage lamps must comply with the identified
power, voltage and have an overload or leakage protection;
Each lamp must be properly grounded, installed in accordance with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Prohibit the use of a lightning storm or wet environment.
4.8 MAINTENANCE
Before starting any maintenance work or cleaning the projector,cut off power from the mains
supply. After switching off,do not remove any parts of the fitting,to avoid getting burnt for at least
30 minutes.After this time the likelihood of the lamp exploding is virtually nill.
The fitting is designed to hold in any splinters produced by a lamp exploding. The lenses must be
mounted and,if visibly Damaged, they have to be replaced with genuine spares.

7
4.9 TO PREVENT BURNING OR FIRE
1. The fixture can be mounted directly on the surface of ordinary combustible material.
2. Do not short-circuit temperature protection switch or fuse, use the specified type of fuse.
3. The equipment must be installed away from inflammable and explosive materials.
4. The equipment should be projected range of 10 meters away objects and projectiles
temperature less than 60 °C 10m
5. Fan or ventilation, at least in the range of 0.5 meters can not be an obstacle.
6. Do not place any object on the lens.
7. Handling at least allow the device to cool for 20 minutes.
8. Do not replace the non-original parts.
5. PACKING AND SHIPPING
5.1 ACCESSORIES PROJECT
.NEX260 packed with fly-case of two in one ,or carton box. Attach follow accessory.
ACCESSORY
CONTENT
QUANTITY
USER MANUL
1
SAFETY ROPE
1
HANG FIXTURE
2
SIGNAL CABLE
1
5.2 TRANSPORT PROTECT LOCK
In order to protect the light, there is a protect lock; During the transport , the lock catch
position need lock in the center, and the fixture keep in vertical state.
5.3 ABOUT PACKING
1. Before packed, make sure power is off, and wait for at least 20mins for cooling down.
2. Before clean the fixture, make sure X, Y axis protect lock closed.
3. After packed by plastic bag, high-lift the fixture with two handles besides the product. put
the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock the
fly-case.
5. Fly-case only up stacked two layers. Prohibited upside down
6. When packed with carton box, equipment should be put into the foam first, then set into a
carton, pay attention to the vertical position.
5.4 UNPACKING
Note: Before unpacking check the damage is whether due to the transportation or not, if you find any
such damage, please do not use this item, and contact with the dealer or manufacturer as soon as
possible.1. Open the fly-case, and discover the inside plastic bag.2. High-lift the product by two
handles beside the bottom base and move it out.3. Before power on, make sure you have opened
the X, Y axis lock!
10

8
6. INSTALLATION STANDARDS
Must use two clamps fix the fixture, and tighten the clamps with1/4 lock, only fully clockwise
rotate 90 °then can lock the fasteners. Add one safety insurance rope on the hole of light base. pls
attention not connect to the transport handle. Attention! One product only can accept one input one
output.DMX512 cable must use the professional shielded twisted pair cable; standard loudspeaker
cable is not reliable to control the long-range data. 24AWG cable is suitable for more than 300
meters long-distance signal transmission and must add\ DMX 512 signal amplifier.
Do not use two outputs to separate the connection, if separate a continuous connection to branch,
DMX512 splitter is necessary.
If use the DMX512 splitter. At first connect DMX512 Splitter input terminal to controller .And
then connected from the splitter output terminal to next device.
Do as above guide to connect other device, and finally coupled with terminal insertion
6.1 Equipment fixation
1. Before installation, it is necessary to verify that the gear clamp is not damaged and can
bear at least 10 times the weight of the equipment. The verification building can bear the
weight of at least 10 times the total weight of the equipment and fixture cable attached
equipment.
2. The fixture is mounted on the base of the lamp body, inserts the fastener into the mounting
hole of the base, and holds the handle of the fastener to lock the 1/4 ring clockwise, and the
other fasteners are installed in the same way.
3. Install a safety rope that can withstand 10 times the weight of the equipment.
4、Check whether the vertical lock has been opened. There is no combustible or attached in
the verification equipment within 3 meters. Near other flammable objects.
Notice！
It is necessary to use 2 fixtures to fix the equipment and fasten the fixture with the 1/4 button.
A clockwise rotation of 90 degrees can be used to lock the fastener. Add 1 safety ropes to the
base hole. Be careful not to connect to the handle.
6.2 Device connection
lWarning！The signal of a device can not connect two inputs and two outputs.
1) 3 core plug-in connector with DMX input and output. Socket 1 pins are grounded, 2 pins
connect negative polarity signals, and 3 pins connect positive signals.
2) use shielded twisted pair cables specially designed for DMX 512 devices; standard
amplifiers can not reliably control long distance data. 24AWG cable is suitable for use for
more than 300 meters. When long distance signal transmission, DMX 512 signal amplifier
must be added.
3) do not use two outputs to separate connections. If you want to separate the continuous
connection components, you must use the DMX512 divider to separate them. If the DMX512
allocator is used, the controller is connected to the input of the DMX512 distributor first, then
the next device is connected from the output end of the distributor, and the terminal plug is
finally fitted according to the above method.
7. AC POWER

9
VOLTAGE, POWER, FUSE SPECIFICATION
Input Voltage
Total Power
Frequency
110-240V
430W
50/60HZ
Fuse voltage
Electronic current
Specification
250V
6A
5×20
B350 Power connection attention:
Attention! The equipment must be operated by professionals; Make sure that the voltage of power
supply must be comply with the voltage identified on the lamp, and must have an overload or
leakage electrical protection.
Live wire(L)
Null(N)
Ground wire
BROWN
BLUE
Yellow +Green
8.1 LAMPMODELAND REPLACE
B350 LAMP
LAMP MODEL
POWER
LIFE/HOUR
LUMEN
BORYLI MSD 260 R9
260w
2000HOURS
8400K
YODN MSD 260 R9
260w
2000HOURS
8400K
WARNING! There is a safety hazard or damage if install similar bulb To
reduce the risk of damage to light ,do change the lamp before using time over
90% of lamp life .
8.2 LAMPREPLACE
Attention! When replace the lamp is forbidden to touch lamp with bare hand, to avoid the greasy
dirt stains filament. filament must be kept clean. Disconnect the power. Before replace lamp,
fixture need 20 minutes for lamp cooling. Fasten the head with Y axis protect lock in 60 °
position.
1.When the power is cut off, it will take 20 minutes to cool the lamp and lock the Y axis lock
at 60 degrees.. (picture 1)
(picture 1)

10
2.Remove four screws（picture 2）,open the light body cover,take the fan bracket and pull out
the connection line of the bulb.（picture 3）.
(picture 2 ) (picture 3)
)
3.Unscrew the two screws of the stainless steel plate support.(picture 4 ）,open the stainless
steel sheet support with one hand to the right.（picture 5）.
(picture 4) (picture 5)
4、The other hand pulled the bulb from the stainless steel tab 15 degrees.（picture 6）,Pull out the
power line of the bulb.（picture 7）.
(picture 6) (picture 7)
5..Install the lamp after replaced.
9. CONTROL PANEL
9.1 Introduction of control panel
Touch screen display：Display the data information and control operation;
Control wheel: can turn right,left and enter;
Turn left: Data increasing, scroll menu;
Turn right: Data diminishing, scroll menu;
Enter: OK
CONTROL
WHEEL
TOUCH
SCREEN
DISPLAY
e 1）

11
9.2 CONTROLPANEL MENU OPERATE
10.DMX Channels
20 CH
16 CH
DMX
DMX
0-4
-
5-8
White + red
9-12
Red
Main Menu
Submenu
Function SET
Function
description
ESC
DMX address
address
001-512
FEATURES ETTING
Esc
Channel Mode
STANDARD/EXTEND/SI
MPLE
Run Mode
DefConfig
Esc
X back
NO/YES
Y back
NO/YES
X Y OPTICAL
COUPLE MODE
NO/YES
Lamp control
OFF/ON
POWER ON
OFF/ON
Half color
NO/YES
Display settings
Esc
CH16
001-255
TEST RUN
Esc
SOUND
Auto
Restore factory mode
Esc
confirm
fixture reset
Esc
confirm

12
13-17
Red + orange
18-21
orange
22-25
Orange +blue
26-29
Blue
30-34
Blue + green
35-38
Green
39-42
Green +magenta
43-46
magenta
47-51
Magenta + yellow
52-55
yellow
56-59
yellow+ light blue
60-63
light blue
1CH Color wheel
1CH Color wheel
64-68
light blue + light green
69-72
light green
73-76
light green + pink
77-81
Pink
82-85
Pink + warming1
86-89
warming 1
90-93
warming 1+ fluorescence
94-98
fluorescence
99-102
Fluorescence + cooling 1
103-106
cooling 1
107-110
cooling 1+ cooling 2
111-115
cooling 2
116-119
cooling 2+ warming 2
120-123
Warming 2
124-127
Warming 2+ white
128-191
clockwise Water flows fast -
slow.
192-255
Anti clockwise Water flows
slow-fast
0－3
strobe off
4－103
strobe slow-fast
104－107
Strobe open
108-207
Pulse strobe ,speed up
2CH Strobe
2CH Strobe
208-212
Strobe open
213-251
Pulse strobe ,speed up
252－255
Strobe open
3CH Linear dim
3CH Linear dim
0-255
Linear dim
4CH Fixed gobo
4CH Fixed gobo
0-3
-

13
4-7
Gobo 1
8-11
Gobo 2
12-15
Gobo 3
16-19
Gobo 4
20-23
Gobo 5
24-27
Gobo 6
28-31
Gobo 7
32-35
Gobo 8
36-39
Gobo 9
40-43
Gobo 10
44-47
Gobo 11
48-51
Gobo 12
52-55
Gobo 13
56-71
Effect gobo slow -fast
72-113
Gobo clockwise fast -slow
114-117
White
118-159
Gobo anti-clockwise slow-fast
160-166
Gobo 1 slow-fast move
167-172
Gobo 2 slow-fast move
173-179
Gobo 3 slow-fast move
180-185
Gobo 4 slow-fast move
186-191
Gobo 5 slow-fast move
192-198
Gobo 6 slow-fast move
199-204
Gobo 7 slow-fast move
205-211
Gobo 8 slow-fast move
212-217
Gobo 9 slow-fast move
218-223
Gobo 10 slow-fast move
224-230
Gobo 11 slow-fast move
231-236
Gobo 12 slow-fast move
237-243
Gobo 13 slow-fast move
244-255
Effect gobo slow -fast move
5CH Prism
5CH Prism
0-127
-
128-170
prism 1
171-213
prism 2
214-255
Prism 3
0
-
1-127
Index
6CH Prism Rotation
6CH Prism Rotation
128-190
Anti-clockwise fast-slow
191-192
Stop
193-255
clockwise slow-fast
7CH
7CH
0-7
-
8-15
combination effect 1
16-31
combination effect 2

14
32-47
combination effect 3
48-63
combination effect 4
64-79
combination effect 5
80-95
combination effect 6
96-111
combination effect 7
112-127
combination effect 8
128-143
combination effect 9
144-159
combination effect 10
160-175
combination effect 11
176-191
combination effect 12
192-207
combination effect 13
208-223
combination effect 14
8CH Frost
8CH Frost
0
-
1-249
Linear Frost
250-255
Colorful Prism
9CH Focus
9CH Focus
0-255
Linear focus
10CH
10CH
0-255
X
11CH
11CH
0-255
X fine
12CH
12CH
0-255
Y
13CH
13CH
0-255
Y fine
14CH
14CH
0-11
EMPTY
15CH Reset
15CH Reset
0-25
-
26-76
effect reset
77-127
XY reset
128-255
fixture reset
16CH Lamp
16CH Lamp
0-25
-
26-100
Lamp off
101-255
Lamp on
17CH PAN TIL
SPEED
NO
0-255
PAN TIL SPEED
18CH
NO
Empty
Empty
19CH
NO
Empty
Empty
20CH
NO
Empty
Empty
11. Routine maintenance
Cleaning and maintenance
Warning: turn off the power before opening any cover.
1. After the power supply is broken, the bottom is cooled and the lid is opened.
2. Dust or floats can be blown gently with a vacuum cleaner or a pressure blow machine.

15
12.Simple troubleshooting
1.The whole device reacts... 1) first check whether the power fuse is normal, 2) check whether the
output of switching power supply is normal, and the normal output of switching power supply is
27V.
2.If the light bulb is not bright... 1. First, test whether the light bulb has broken down, 2) the heat
dissipation of the bulb is normal, whether the vent is blocked, 3) the temperature control switch is
not working properly. 4) whether the PFC380 output is normal.
3.XY axis positioning point running... There is an occasional phenomenon in the use of the
computer head shaking lamp. In the OPTO optocoupler mode of the menu, set up OFF
confirmation, then reset the whole machine and save the optocoupler function.
4.If a one - way function is not normal... First, find the driving plug of the circuit board of this
road, and change the two adjacent drive motor plugs to check out the problem of the board or the
wiring or the motor.
5.If a function is jitter: the motor plug position is found on the drive board, the general motor has
4 lines and 2 groups, the universal meter measure each group of resistance values, or the lack of
phase, or bad contact.
6.If a few road function work is not normal... In general, a chip controls several drives at the same
time, so it is possible that the chip is abnormal.