JMC UB5A0 N4 User manual

JMC Systems Engineering AB www.jmc.se [phone] inf[email protected]
User Guide
JMC-UB5A0 N4 Hybrid / SDI

JMC Systems Engineering AB www.jmc.se [phone] inf[email protected]
Introduction
UB5A0 N4 SDI is a high-quality, high-performance capture device which is specially designed for high-definition
video capture applications. It supports up to 4 channel of video inputs with USB3.0 connectors to connect with signal
sources. With software support, UB5A0 N4 SDI can record live video from UB5A0 N4 SDI via USB 3.0 sources into
MPEG4 or H.264 files..
Product Specification
SC5A0 Product Series Hardware Specification
Model
UB5A0 N4 SDI
Max. FPS
1920×1080p@60/50fps
Recording
Mode
Hardware Compression, Real-Time Mode
Product
photo
Dimension
250mm x 129.8mm x 41.9mm(with foot pad +5mm)
Interface
USB 3.0 x1,Power switch x1, DC Jack x1, RS485 × 1
Video Input
4 × SDI
1 ×Composite, 1 × S-video , 1 × YPbPr , 1 × HDMI, 1 × DVI , 1 × VGA
Recording
Video Resolution
SDI
DVI / VGA / HDMI / YPbPr
3G-SDI
1920×1080p@60/50fps
HD-SDI
1920×1080p@30/25/24fps
1920×1080i@60/50fps
1280×720p@60/50/30/25fps
SD-SDI
720×480i@60fps
720×576i@50fps
1920×1080p@60/50fps
1920×1080p@30/25/24fps
1920×1080i@60/50fps
1280×720p@60/50fps
1024×768p@60fps
800×600p@60fps
640×480p@60fps
720×480p@60fps
720×576p@50fps
720×480i@60fps
720×576i@50fps
Audio Input
SDI EmbeddedAudio × 4
Audio line in × 4
RCA (Audio L/R through component cable) × 2
Audio Format
Stereo / 16-bit / 32000 ~ 48000Hz
Multiple Cards
∞
SDK
VC++ / C# / .NET / VB / V4L2

JMC Systems Engineering AB www.jmc.se [phone] inf[email protected]
System Requirement
OS Support
Windows XP / Vista / Windows 7
Windows 8 / Windows 8.1/ Windows 10
Linux 2.6.14 or Higher
( 32-bit and 64-bit )
1、Hardware Installation
Before You proceed
Please note below precautions before any install/uninstall operations:
Plug the power cord and turn on UB5A0 power button
Connect USB3.0 cable to PC/Laptop
3.1. Signal Source Connection
Connection Diagram
4. Software Installation
1.Driver : Yuan Driver
2.Application : vMix Software
4.1. Yuan Driver (Windows XP, Windows Vista, Windows 7, Windows 8/8.1, Windows 10)
Install the driver, click ‘DRIVER.QP0204_YS 1.1.0.149.0.exe
Follow by the icon below to complete install procedure

JMC Systems Engineering AB www.jmc.se [phone] inf[email protected]
Step 1: Click driver icon
Step 2: Shows driver name, version and architecture
Step 3: Enter user name and organization


JMC Systems Engineering AB www.jmc.se [phone] inf[email protected]
Step 4: Start installation
Step 5: Trust the software provider
Step 6: Complete the driver installation

JMC Systems Engineering AB www.jmc.se [phone] inf[email protected]
Step 7: After driver installation success, the driver package will acquire an reboot
Step 8: After reboot, the UB5A0 N4 SDI Hybrid shows in Device Manager
Users shall get 4 QP0204 USB devices
4.2. vMix Software
Step 1: Open vMix software

JMC Systems Engineering AB www.jmc.se [phone] inf[email protected]
Step 2: Select Camera and format , then press OK
Example:
Camera : QP0204 USB, Analog 03 Capture
Input : SDI
Resolution : 1920x1080
Frame Rate : NTSC 59.94p
Video Format : H264 Low Latency

JMC Systems Engineering AB www.jmc.se [phone] inf[email protected]
Step 3: After press OK, the vMix will start to action
Below is some information about latency with UB5A0 N4 Hybrid
CPU
Latency(QCAP)
vMix
QCAP
CH01
CH02
CH03
CH04
720p50
26%
5%
0.12s
0.12s
0.12s
0.12s
720p60
31%
6%
0.11s
0.11s
0.11s
0.11s
1080p50
27%
5%
0.24s
0.22s
0.22s
0.20s
1080p60
36%
5%
0.20s
0.22s
0.18s
0.18s
*QCAP is the testing program from our SDK