SPECIFICATIONS
Notes on Installation and usage
Pick-up Device 1/3¡1/4¡SHARP CCD
TV System PAL(CCIR) /NTSC(EIA)
Pixel NTSC:512(H)*492(V) PAL:512(H)*582(V)
Scanning Area 1/3¡:4.9mm(H)x3.7mm(V) ;1/4¡:3.6mm(H)X2.7mm(v)
Picture element(pixeles) E:290K C:320K
Horizontal Resolution 420 TV Lines
Video Output: 1Vp-p 75ohm , Negative
S/N Ratio More than 48dB
Minimum Illumination 0 Lux(LED ON)
White Balance Auto
Power Consumption DC 12V
Electronic Shutter PAL: 1/50~1/100,000s ; NTSC:1/60~1/100,000s
Operation Temperature -10C~+50C
LED 12 unit IR LEDS
IR Light Distance 10-15M
Introduction
1. It can view the objects without outside light source, it is a full-
function collector , The features of product range have complete
functions,comact volume ,low power consumption, high sensitivity,
easy to operate, install and hide.
2.lt is extra suitable for video meeting,schools,supermarkets,shops,
workshops,ware-houses,offices,visual telephone,visual E-mail, PC
multi-media- toys , games ,monitoring, guardianship , anti-burglary,
safeguard other special tasks. This product can also wrok together
with other equipment including micro computer to realize such
capabilities as documents filming , photographing, complex video
signal PAL(CCIR) or NTSC ( ELA).
3. This product is equipped with clip-type support , which can be
detached at your option, or be used to adjust the location to your
desired level .You can choose a best location then clip the support
and adjust the installation angle to ideal level.
4.Besides,this product is connectable with other support to achieve
higher flexibility. The working voltage of this product is DC + 12V.
(The supplied power source is recommendable).This product can be
powered on for a long time , but the input voltage can not exceed
DC+12V .The connection mode of the power lead is "+" for internal
terminal,"-" for external terninal.
5. The yellow plug is video output cable ,which can be connected
with various monitors and TV with video input jack to watch images.
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Ä ¿ µ × ³
É ¼£ É º£
Ò Î£
Å ×£
ÁÔ»
Í ¸£ ÑÉ£
³ ´£
ÎÁ±Â£
μ±º£
²Æó£
² Ö£ Ò´:2/2
°´:1.0
槐
157gÍ°Ö
190(L)X130(H)mm
¸ º£
иÇÓ Ã Ê È Æ µ µ
XXXXXXXXXXXXXX XXXXXXXX XXXXXX
1
1¡Users should not disassemble the camera from the front direction.
2¡Always handle the camera with care.Please do not apply a shock or vibration as
much as possible and take cautions not to cause damage or make a scratch on the
camera due to careless storage.
3¡Please do not install the camera in the rainy place or high humid areas.And do not
operate the camera in the wet place.
4¡Do not clean the camera body with the strong abrasives or soaps.When the camera
becomes dirty,clean it with the pecially
rugsfor lens to clean the dome cover.
5¡Please select the camera in the cool area where is not exposed in the direct sunlight.
Or it can cause bad effects on the product.
CUM-JMK-JK212D
JMK ÓÎ JK-212D ËÃÊ
Side:B
