John Lewis Anyday 820 35107 User manual

Anyday Eucalyptus Bench 2 Seater
Stock number: 820 35107
H86 W120 D59cm

Thank you for purchasing the Anyday Bench 2 Seater. Please read the instructions andwarnings carefully before use,
to ensure safe and satisfactory operation of this product.
At John Lewis, we are committed tomaking great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design tolife.
Ourexpect Product Technologists workcollaboratively with our buyers and suppliersto assure the legality, safety
andquality of the product we sell.
We are all committed to designingand developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
2
Tools required
Time to assemble
30 Minutes
People to assemble

3
Important safety information
020 7592 1000
Warnings
The product should only be used on firm, level ground.
Keep small parts out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may occur.
Do’s
Don’ts

4
Yourbench 2 seater
Stock number: 820 35107
Chair overall size:H86 W120 D59cm
1
2
3
4
4
6
5
1
2
3
Left leg
Backrest
Right leg
1
1
1
Ref Description DimensionsQty
4
5
6
Front / Back bar
Wood support
Seat
2
4
1
5
5
5
90 x 61 x 3.5cm
1 15 x 39.5 x 2cm
90 x 61 x 3.5cm
1 15 x 6.5 x 4cm
10 x 10 x 2cm
1 19.5 x 42 x 4.5cm

Fixtures and fittings
Allen head screw
Allen head screw
Screw
Allen key
7mm x 70mm
6mm x 50mm
4mm x 30mm
4mm
8
8
4
2
Fixtures and fittings
supplied (not actual size)
A
B
C
D
5

Product Assembly
Anyday Eucalyptus Bench 2 Seater
820 35107
Step 1
Parts
1
Step 2
Parts
A
1
2
3
4
4
2 3 4
A
A
A
A
A
A
A
A
6

Product Assembly
Anyday Eucalyptus Bench 2 Seater
820 35107
Step 3
Parts
Step 4
Parts
6
B 5
5
5
5
5
5
B
B
6
6
7

Product Assembly
Anyday Eucalyptus Bench 2 Seater
820 35107
Step 5
Parts
C
CC
8

Care guide
Care and maintenance
Wood furniture
How to care for your wood furniture
The wood care maintenance guide is for reference only. It is recommended to follow the application guide provided
by varnish/oil manufacturers.
In orderto maintain the appearance of the wood, regular coating of oil must be applied. The frequency will depend
on the weather conditions experienced.
Safety instructions
Make sure the assembly instructions have been followed correctly.
Failure to follow all of the instructions and warnings may cause injury.
Keep fittings out of children's reach and keep children well away from the construction area.
The bench has been designed to withstand a maximum weight of 200kgs (the maximum load is a total load and
not one person singly). Maximum user weight PER SEAT: 100kg.
Do not sit on the armsofthe bench.
Do not use the bench as a step stool/ladder.
Do not stand or jumpon the bench.
Do not rock the bench whilst seated.
Beware of the risk of falling and tipping.
Pregnant women should take additionalcare when using this product.
Children should always be under direct adult supervision whilst using this product.
Always use on firm level ground, ensuring all legs remain in contact with the ground.
If the product is broken ordamaged, discontinue use immediately.
Regularlycheck all fasteningstoensure that they are properly tightened.
Outdoor fair weather and domesticuse only.
Always protect from severe weather conditions.
During bad weather or winter monthsthe product should be stored in a cool and dry place.
Keep away from fire.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Wood is a natural materialwhich can deteriorate in appearance when left outside. A surface coating is recommended
to protect the wood from exposure to moisture and UV rays which can cause splitting and darkening, when exposed
to the weather. The finish should be regularly maintained to ensure that the wood is protected from moisture and the
furniture continues to look its best. The wood has been treated with oil during manufacturing, so does not normally
require an additionalcoating prior to use.
IF the furniture is intendedto be left outside for a prolonged period of severe weatherconditions, anothercoat ofoil
is required.
When a top up coat is required,please follow the instructions in the maintenance section for the best results.
1. Oil is best appliedwith a clean cloth. Simply wipe the oil onto the wood surface straight from the container.
2.
Treat all surfaces of the furniture. Please ensure that any hidden surfaces (sush as those exposedwhen the furniture
in turned upside down) are also treated.
Particular care shouldbe given to the end grain and any joints or crevices.
3. Let the surface dry out. This can take 4 to 12 hours but depends on the surrounding conditions.
4.
Repeat step 2 & 3 with at least 2more coats of oil. Extra coats will give semi gloss sheen once the oil has dried out.
Any excess oil can by wiped off with a clean cloth. Please follow the application guide provided by
varnish / oil manufacturers.
Fine surface cracks can appearin hardwood over time. If the wood is regularly coated and the product is stored
according to the guidance in this instruction manual, this should not affect the structural integrity of the product.
9
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY!