Johnson Controls Unitary Products S1-TTSCC01 Guide

Johnson Controls Unitary Products 689281-UUM-A-0812
ZONING USER’S
INFORMATION MANUAL
PREMIUM HIGH DEFINITION TOUCH
SCREEN COMMUNICATING CONTROL
MODELS: S1-TTSCC01 Energy Saver
Need Assistance?
For assistance with this product please visit http://www.yorkupg.com
Read and Save This Manual
® U.S. Registered Trademark
US Patent No.
Copyright © 2012 Johnson Controls, Unitary Products. All rights reserved
Table of Contents
QUICK REFERENCE . . . . . . . . . . . . . . . . . 2
HOME SCREEN . . . . . . . . . . . . . . . . . . . 2
PROGRAMMING & OPERATION . . . . . . . . 3
MANAGE ZONES . . . . . . . . . . . . . . . . . 3
USING PROGRAM SCHEDULES . . . . . 3
VIEWING AN EXISTING PROGRAM
SCHEDULE . . . . . . . . . . . . . . . . . . . . . . 4
ASSIGNING PROGRAM SCHEDULES TO
ZONE CALENDARS . . . . . . . . . . . . . . . 4
TEMPERATURE OVERRIDE . . . . . . . . . 5
SCHEDULE OVERRIDE . . . . . . . . . . . . . 5
VACATION HOLD . . . . . . . . . . . . . . . . . . 5
FAN SETTINGS . . . . . . . . . . . . . . . . . . . 6
HUMIDITY SETTINGS . . . . . . . . . . . . . . 6
SYSTEM STATUS . . . . . . . . . . . . . . . . . 6
ZONING SETTINGS . . . . . . . . . . . . . . . . 6
OTHER SETTINGS . . . . . . . . . . . . . . . . 6
SYSTEM OPERATION . . . . . . . . . . . . . . 7
This document is intended to supplement the User’s Information Manual for the Touch
Screen Communicating Control (S1-TTSCC01) and provide additional Zoning information.

689281-UUM-A-0812
2 Johnson Controls Unitary Products
QUICK REFERENCE
HOME SCREEN
The Home Screen for Non-Programmable and Programmable Modes include similar additions for
Zoning.
Menu
Alert: Change Filter
Auto
ON
70°
30%Humidity
11:07AM Thu 21 Jul
M
A
l
er
t: C
h
ange
F
i
l
t
e
r
3
0
%
H
u
m
idit
y
72°
62°
78°
Living Room
Current Date & Time
Zone Name
Zone Current
Indoor Temperature Current Outdoor Temperature
(if communicating outdoor
equipment is installed)
Zone Fan Setting
(if display setting is enabled)
Zone Humidity Setting
(if display setting is enabled)
Zone Current Indoor Humidity
(if display setting is enabled)
Screen System
Popup Alerts
(at Master Touch Screen only)
Zone
Cool Mode
Zone
Heat Mode Menu
Quick
Help
Return to Home Screen
Zone Schedule Override
(at Master Touch Screen only)
Zone Temperature Override
NOTICE

689281-UUM-A-0812
Johnson Controls Unitary Products 3
PROGRAMMING & OPERATION
MANAGE ZONES
USING PROGRAM SCHEDULES
Program schedules cannot be viewed or adjusted in Non-Programmable mode.
1. Press MENU in the bottom right corner of your
screen.
2. Press Manage Zones button.
3. This screen gives you an overview of each zone.
To make changes or view further details of a spe-
cific zone press on the desired zone.
4. Press MENU then Manage Zones and select the
Master Zone to return to the Master Zone View.
The Manage Zones button can be used to view or adjust settings in any other zone. However,
some settings can only be adjusted at the Master Touch Screen. When using the Manage Zones
feature, make sure to note in the upper left corner of the screen which zone you are viewing and
adjusting.
In order to create/edit program schedules, change the View/Mode to either Programmable or
Advanced Programmable. Schedules are accessible at the Master Touch Screen only.
Menu
Alert: Change Filter
Auto
ON
70°
30%Humidity
11:07AM Thu 21 Jul
M
A
l
er
t: C
h
ange
F
i
l
t
e
r
3
0
%
H
u
m
idit
y
72°
62°
78°
Living Room
Schedule
Emergency
Heat
Close
Alert: Change Filter
StatusHumidityFan Settings
Dealer Tools Clean
Manage
Zones
Living Room
Living Room / Manage Zones
72°
Living Room Kitchen
Master Bedroom Basement
72° Cancel
Override
68°
68° 70°
72°
NOTICE
NOTICE

689281-UUM-A-0812
4 Johnson Controls Unitary Products
1.Press MENU.
2.Press Schedule icon.
3.Press
a. The New, Edit or Copy icons to create a new or
edit an existing schedule. Refer to the User's Infor-
mation Manual for more details.
b. The Delete icon to delete an existing schedule.
Refer to the User's Information Manual for more
details.
c. The Viewer icon to view existing schedule summaries. See below.
d. The Import/Export icon to import or export a program schedule. Refer to the Touch Screen
Communicating Control User's Information Manual for more details.
e. The Assign to Calendar icon to assign an existing schedule to the calendar. See below.
VIEWING AN EXISTING PROGRAM SCHEDULE
ASSIGNING PROGRAM SCHEDULES TO ZONE CALENDARS
1. Select your desired zone (i.e. Living Room).
2. Press OK.
3. Select Schedule to view by pressing left or right
arrows.
4. Select Day to view.
5. Press Close.
6. Repeat steps 1 through 5 for each zone.
1. Select your desired zone (i.e. Living Room).
2. Press OK.
Cancel Save
Assign to
Calendar
New Viewer
Edit
Copy
Delete
Import/
Export
Schedule
Energy Saver
Schedule 1
Schedule 2
Schedule 3
Create or edit schedules
Living Room
OK
Select Zone
Kitchen
Bedroom 1 Dining Room
Den
Apply to
Schedule:
Master
Bedroom
Close
View (Active in Calendar)
Schedule 3
Living Room / Schedule Viewer
Awake
6:00am
73° 70°
Day
8:00am
73° 70°
Return
5:00pm
70° 65°
Sleep
10:00pm
73° 70°
Mo Tu Th Fr Sa SuWe
Living Room
OK
Select Zone
Kitchen
Bedroom 1 Dining Room
Den
Apply to
Schedule:
Master
Bedroom

689281-UUM-A-0812
Johnson Controls Unitary Products 5
TEMPERATURE OVERRIDE ( Advanced Programable Mode)
1. Press Thermometer icon.
2. Use the slider to set the desired override temperature.
SCHEDULE OVERRIDE
The schedule override feature is available at the Master Touch Screen only. Refer to the User's
Information Manual included with the Touch Screen Communicating Control for more details.
VACATION HOLD
The vacation hold feature is available at the Master Touch Screen only. The temperature, fan, and
humidity settings for the specified vacation period will be applied to all zones. Each zone will be
controlled individually to meet these settings. Refer to the Touch Screen Communicating Control
User's Information Manual for more details.
3. Select Schedule to assign to selected zone cal-
endar by pressing up or down arrows.
4. Select individual Months, Seasons, or All Year
for the selected zone calendar assignment.
5. Repeat steps 3 - 4 for each schedule's calendar
assignment.
6. Press Done to save all changes.
7. Repeat steps 1 through 6 for each zone.
Touch Screen Master View
3. Press Pick Duration button.
4. Select the duration for running the temperature
override.
a. Until Cancelled - holds temperature until can-
celled.
b. Until specific Date & Time - holds temperature
until specified date and time.
c. Until program schedule Next Event - hold tem-
perature until next schedule event.
View at Master Touch Screen
Touch Screen Sensor View
5. Press the Apply button.
View at Touch Screen Sensor
Cancel Done
Living Room / Schedule
Energy Saver
Schedule 1
Schedule 2
Schedule 3
Select Schedule: Assign to Calendar
Dec Jan Feb Mar
Spring
FallSummer
Winter
All Year
Apr May
June July Aug Sep Oct Nov
Menu
Alert: Change Filter
75°
50° 85°
11:07AM Thu 21 Jul
70°
Pick
Duration
Quick
Quick
Menu
Alert: Change Filter
75°
50° 85°
11:07AM Thu 21 Jul
70°
Apply

689281-UUM-A-0812
6 Johnson Controls Unitary Products
FAN SETTINGS
The fan mode and operation interval settings can be specified for each zone. However, the fan per-
centage setting will be applied to all zones. The actual airflow delivered to each zone during fan
operation will depend on the airflow settings made for each zone during installation and the number
of zones that are calling for fan operation at any given time.
HUMIDITY SETTINGS
Humidity settings can be specified for each zone having Touch Screen Communicating Controls.
Zone Sensors and Zone Displays do not include the humidity sensing feature.
SYSTEM STATUS
The status of the system including the zoning components can be viewed in the system map. Press
the Accessories button to see the status of the Zone Panel. Press the Thermostat icon for informa-
tion on each zone sensor.
ZONING SETTINGS
Your new Touch Screen Communicating Control is preset to Zoning Mode.
To change the Zone Mode:
OTHER SETTINGS
Date / Time
The Master Touch Screen sets and updates the date and time on all zone sensors. Therefore, the
date and time can only be set at the Master Touch Screen.
Security
Security is enabled and a PIN specified only at the Master Touch Screen. Security settings including
the PIN apply to all Touch Screen Sensors.
Use of the "Auto" Humidity Function is highly recommended. In this mode, the Master Touch
Screen adjusts the humidity setting to maximize comfort during heating and cooling seasons.
Improper humidity settings can result in extreme humidity levels and property damage.
1. Press MENU in the bottom right corner of your
screen
2. Press Settings icon
3. Press Zoning icon
4. Select Zoned or Non Zoned.
5. Press the Edit button to change the name for
each Zone.
In Non Zoned Mode the dampers to all Zones will be open and the zoning system can only be
controlled from the Master Touch Screen.
NOTICE

689281-UUM-A-0812
Johnson Controls Unitary Products 7
View / Mode
The View Mode for the Master Touch Screen and all Touch Screen Sensors is specified at the Mas-
ter Touch Screen. The Sleep Screen can be specified for each Touch Screen Sensor.
Temperature Format
Temperature format (Fahrenheit or Celsius) is specified at the Master Touch Screen but applies to
all Touch Screen Sensors and Zone Displays.
Language
The View Mode for the Master Touch Screen and all Touch Screen Sensors is specified at the Mas-
ter Touch Screen.
SYSTEM OPERATION
If the zoning system is equipped with power open / power closed dampers, the Master Touch
Screen may under certain conditions redirect airflow to zones that are not calling for conditioning
(heating or cooling or continuous fan) to balance the airflow in the system. The Master Touch
Screen manages the airflow adjustments so that comfort is maintained in all zones.
Under some conditions, the Master Touch Screen may temporarily direct conditioned air to zones
that are not calling for conditioning or continuous fan operation. This is normal operation.
NOTICE

Subject to change without notice. Published in U.S.A. 689281-UUM-A-0812
Copyright © 2012 by Johnson Controls, Inc. All rights reserved. Supersedes: Nothing
York International Corp.
5005 York Drive
Norman, OK 73069
NOTES