Johnson Hardware 200 User manual

www.johnsonhardware.com
R
Prepare opening to dimensions as shown on 2000 & 2060 instruction's.
Insert 2020 Hanger wheels into track with locking levers facing ends of track.
2020 2020
2071
200 POCKET DOOR
GLASS DOOR HARDWARE
For 1/2" (12.5mm)
Tempered Glass Door Panel
Maximum Door Weight 400 lbs. (182kg.)
IN2071GP L.E. JOHNSON PRODUCTS, INC. - 2100 STERLING AVE. - ELKHART, IN USA 46516 - [phone] Rev 10/22
------INSTRUCTION SHEET IS SUBJECT TO CHANGE------
SUB FLOOR GUIDE
FINISHED FLOOR GUIDE
2088 GUIDE / FINISH FLOOR
2087 GUIDE / SUBFLOOR
1.21 [31mm]
1.73 [44mm]
LOCATE FRONT OF GUIDE
FINISH SPLIT JAMB
FINISH SPLIT JAMB
FLUSH WITH FINISH SPLIT JAMB

IN2071GP L.E. JOHNSON PRODUCTS, INC. - 2100 STERLING AVE. - ELKHART, IN USA 46516 - [phone] Rev 10/22
------INSTRUCTION SHEET IS SUBJECT TO CHANGE------
1
HAVE GLASS beveled, drilled and tempered per illustration.
2
SLIDE PLASTIC SLEEVES over hanger post.
3
INSERT RUBBER PAD over post with smooth
side facing metal plate.
4
INSERT DOOR PLATE into holes drilled in door.
5
INSERT SECOND RUBBER pad on other side of glass,
smooth side facing away from glass.
6
7
LAY OTHER HANGER PLATE against pad and thread 3/8" screws into metal post.
Thread hex slotted Locknut onto adjusting bolt, then thread adjusting bolt into door plate.
HANG GLASS DOOR. Adjust Hanger then tighten locknut.
8
SNAP HANGER COVERS over Hanger.
CLEAR ANY DEBRIS FROM TRACK
AND WHEELS PRIOR
TO HANGING DOOR.