Johnson Plastics Plus SOAPDISP18 User manual
Nov-21
White Soap Dispenser 18oz
WHITE SOAP DISPENSER 18OZ - Heat Transfer (Hard Surfaces)
SOAPDISP18
GENERAL TONER HEAT TRANSFER PROCESS
Recommended Equipment & Accessories
•Heat Transfer Printer
•Heat Transfer Paper for Hard Surfaces with paper instructions
•Mug Press
•JP4H2-4 or JP4H2-5 (for use with JP450 Mug Press)
Nov-21
•Heat Tape
•Heat gloves
Recommended Settings
Refer to the Heat Transfer Paper Instructions for best results.
Time
60 seconds
Temperature
300°F
Pressure
Medium/Heavy
General Heat Transfer Instructions
•Follow the Heat Transfer Paper Instructions for best results.
•Adjust mug press pressure to medium-heavy.
•Preheat the mug press to 300°F or temperature specified per paper instructions.
•Print and place transfer face down onto the surface of the dispenser. Secure transfer with heat tape.
•Place the dispenser with attached transfer into the mug press with the transfer paper on top.
•Close and press for the recommended time.
•When finished, open the mug press and remove the dispenser.
•Using heat gloves, remove the dispenser from the mug press.
•Peel the transfer paper off of the surface of the dispenser while the product surface is still hot/warm.
oThe product should still be warm, but able to be handled without heat gloves.
Tips and Tricks
•For best image placement, utilize the product template found on the product page on JPPlus.com.
Troubleshooting
•The image did not completely transfer to the product.
oSlightly increase the press pressure.
oThe product may still be too warm when peeled. Wait a little more time before peeling the
transfer paper.
•Ensure that the Hard Surface paper used is compatible with the product material, as there are several
types of Hard Surface papers available for different types of hard surface goods.
Templates and Images
Nov-21
•Visit jpplus.com to find the product page for this item. The product template may be found under the
Tech Docs and Downloads area of the page.
To order more of this product, see similar products and much more, please visit jpplus.com.
For additional product support and troubleshooting, please contact JPPlus Advanced Support Team:
•Phone: 419-500-4877
•Email: ast@jpplus.com
•Schedule an appointment: https://jpplusadvancedsupport.setmore.com/
Table of contents
