JOHNY VAC JV222 User manual

Cordless
Vacuum
Cleaner
A powerful
vacuum cleaner,
light and
manoeuvrable
USER
GUIDE

- 2 -
JV222
A S S E M B LY

- 3 -
SAFETY PRECAUTION
1. This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of experi-
ence and knowledge if they have been given supervision or instruction concern-
ing use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision
2. This appliance is designed for domestic use only.
3. Do not pull on the connection cord, but rather on the plug, to separate the
appliance from the mains.
4. Do not use outdoor.
5. Do not leave the appliance unattended when it is switched on, as this may be a
source of danger.
6. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
7. Following objects are strictly banned, otherwise the vacuum cleaner will be
damaged or fire calamity will be caused, which bring such accidents as human
body injuries:
• Don’t pick up large or sharp broken such as glasses,
• Don’t pick up harming or erodent liquids (solvent, corrosive, detergent…),
• Don’t pick up inflammable or explosive substance such as gasoline or alcohol.
8. Check the device and connections regularly for visible damage. The device
must not be used if the housing is damaged or other damage is present.
9. Never attempt to open the device or the mains adapter yourself or to replace
the connecting cable. Always have repairs to the device carried out by a special-
ist workshop. There is considerable danger to the user if repairs are faulty.
10. Do not trap the mains adapter cable and when using the adapter, pay
attention to where the cable is to prevent any danger of tripping over it. Keep the
cable away from heated surfaces (e.g. cooker surfaces).
11. Do not touch the mains adapter and cable with wet hands.
12. Do not point the vacuum cleaner at persons or animals when in operation.
13. Only use the mains adapter on dry surfaces in buildings.
14. Only use the device with the accessories supplied.
15. Please keep these instructions in a safe place. Use only with the provided
adaptor.
16. The appliance must only be supplied at safety extra low voltage correspond-
ing to the marking on the appliance.
17. This appliance includes Li-ion batteries; do not incinerate the batteries or
expose to high temperatures, as they may explode.
18. This appliance is only charged with the adaptor delivered together

- 4 -
2
1
5
6
10
11
12
13
14
15
7
8
9
2
3
4
1. 3 in 1 accessories
2. Charging Station
3. Tube set
4. Electric brush assembly
5. Brush Release button
6. HEPA Filter
7. Release button of HEPA Filter
8. Release button of accessories
9. Suction tube
10. On/off knob
11. Main body
12. Dust cup
13. Li-ion battery pack
14. Release button of battery
15. Wall mounted tool charging
station
COMPONENTS

- 5 -
TECHNICAL DATA
Unpacking and assembling
Check that all the parts in the box. (See page. 4)
Step 1.
Install the battery as below picture.
Step 2.
Install the electrical brush by inserting it into tube carefully
Model JV222
Rated voltage 22.2V d.c.

- 6 -
Step 3.
Install the tube with brush by inserting it into the vacuum suction tube.
Step 4.
Install the 3 in 1 accessories to suction tube or tube of vacuum cleaner
as below drawings.
Vacuuming floors and carpets
You should regularly check that the nozzle cushions and the brush roller
are clean in order to avoid scratching sensitive floors.
Following Step 1 to Step 3 to assemble the whole unit and then start the
device by pushing the on/off button.
Vacuuming tables, furniture, car seats etc.
To clean the tables, furniture, car seats or some corners, just remove the
tube by pressing the release button. And following step 4 to install the 3 in
1 tools, then press the on/off knob to start the cleaning.

- 7 -
CHARGING
Insert the adaptor into the mains socket (Note: Always make sure that the device is
turned off) and then connect to the device. The indicator light will flash once the
device has made contact with the adaptor.
It takes 3 hours or so to fully charge the batteries before the first use, the light will turn
off on once it is full charged. In order to ensure that it is always ready for use, the
device should be left on connection with adaptor when not being used.
The adaptor may become warm during charging-this is normal.
If your vacuum cleaner is with charging station, there is optional charging method.
Put the battery onto the charging base (well away from heat sources or wet places).
Insert the adaptor into the mains socket and connect the charging station.

- 8 -
HOW EMPTYING/ CLEANING
2. Press the release button to open the dust cup cover,
drop out the trash into the dustbin.
3. Remove the dust cup by pressing the release button, clean the cyclone
part by toothbrush, Make sure that the parts are dry before they are
assembled back for next using.
1. Remove the accessories from the body by pressing the release button

- 9 -
FOR CLEAN OR REPLACE THE HEPA FILTER
4. Press the button to open the front cover, take out the HEPA filter to wash
it under flowing water, Dry it in air naturally before next time using (Make
sure the HEPA is dry before next time using).
Or open the front cover of vacuum cleaner to replace a new HEPA filter.
RE-INSTALL THE COMPONENTS
Firstly re-install the dust cup back to the unit following up the opposite
procedures when detaching the dust cup, then install the HEPA filter, the
tubeset, brush or 3 in 1 tools for next time using.

- 10 -
HOW TO STORE THE VACUUM CLEANER
Install the wall-mounted tool on the wall, put the
vacuum cleaner by insert it into hook as picture.
If the roller brush becomes blocked or jammed for any reason, the vacuum will be
lower down. The roller brush may then need to be cleaned. Switch off the device
firstly, and then carefully use a pair of scissors or a sharp knife to remove any items
such as threads that may have become entangled.
If the roller brush needs to be taken out for cleaning, push slip button on the bottom of
brush by finger or a coin, remove slip button as below picture, take out the roller brush
for cleaning, afterwards, Put the slip button on roller brush and lock it by finger.
Cleaning of wheel axles If a wheel is jammed by threads or dirt: Remove the wheels
by carefully prizing them loose using a screwdriver inserted into the cavity. Remove
threads or any other objects that may have become jammed in the wheels axles.
Reassemble the wheels by pressing them tightly together.
HOW TO CLEAN THE ROLLER BRUSH

- 11 -
Made in China
If your vacuum cleaner is with charging
station, install the handheld vacuum
cleaner into the station, put the aluminum
tube by insert it into hook as picture.
Basic Technical Data
BATTERY: 22.2 V 2200 mah Li-ion
ADAPTER: Input 100~240V 50Hz
OUTPUT:27V 800 mah
CHARGE TIME: 3 hours
DISPOSAL
If the device is to be disposed of, the batteries should be
removed. Used batteries should never be disposed of with
household waste. These should always be taken to a
recycling station.

GUIDE D'UTILISATION JV222 FR/EN
FOR
PARTS, ACCESSORIES & VACUUM BAGS
VISIT OUR WEBSITE AT
WWW.JOHNNYVAC.COM