Joivi VJ-07 User manual

sku:VJ-07
Wicker Sofa Set
W
A
R
R
A
N
T
Y
1
Y
E
A
R
1
Thank you for choosing Joivi!
Our goal is to provide high quality outdoor furniture with
outstanding customer service-all at an affordable price.
Please let us know how we are doing!
Problems?
(Missing pieces, wrong pieces...)
We will fix it immediately. Send us an email at
[email protected].
Happy?
Please leave us a review!
You can make others happy too!

IMPORTANT, RETAIN FOR
FUTURE REFERENCE:
READ CAREFULLY.
Safety
For domestic use only.
Don't tighten all the bolts before the product is fully assembled.



Periodic structural checks of this product should be
It would be useful to ask someone to help you assemble
the product.
undertaken, do not use if you have any doubts about its
Do not stand on the seat.
Do not sit on the armrest.
Do not let children play with this product.
Maximum load per seat: 250 lbs.
At the beginning of the season

product are secure, do not use if you have any doubts
At the end of the season
This product should be stored under cover during
prolonged spells of adverse weather (wet or cold) and
also during the winter (ideally in a garden shed or
garage).
Always clean and dry thoroughly before storage.
- 1 -

Tips for Cushions
1
3
OK
2
In order to compress the package, we put the cushions in
the gap of some parts. So there may be crinkle on the fabric.
Don’t worry. Just flap every corner of the cushion evenly and
it will get back into its original shape soon.
- 2 -

- 3 -
Item
no.
Reference
Image Description Qty.
D1
D2
D3
D4
D5
D6
D7
D
E
F
Left Armrest
Side Panel
Seat Base
Seat Cushion
COMPONENT LIST - LEFT CORNER SOFA
Back
Side Panel
1
1
1
1
1
1
1
16
1
16
Washer
Back Cushion
M6X35
Head Cap Screws
Allen Key

NOTE:
Do NOT tighten any screws fully first until you have tightened all the
screws.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned, loosen the
screws and tighten sequentially.
If the Corner sofa is not stable it could lead to damage to the product.
Attach the Side Panel (D3) to the Seat Base (D5) by securing with M6*35 Head
Cap Screws (D) and Washers (E). Do this in 2 places.
1
- 4 -
x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
D3
D5
E
D
x2

Attach the Seat Base (D5) to the Back (D2) by securing with M6*35 Head Cap
Screws (D) and Washers (E). Do this in 2 places.
2
- 5 -
x2
x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
D3
D5
E
D
D2

D3
D5
E
D
Attach the Side Panel (D4) to the Seat Base (D5)& Side Panel (D3)& Back (D2) by
securing with M6*35 Head Cap Screws (D) and Washers (E). Do this in 6 places.
3
- 6 -
x6
x6
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
D2
D4

D5
D2
D4
DE
x6
D1
D3
Attach the Left Armrest (D1) to the Seat Base (D5)& Side Panel (D3) & Back (D2) by
securing with M6*35 Head Cap Screws (D) and Washers (E). Do this in 6 places.
4
- 7 -
x6
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.

D7
D6
- 8 -
Place the sofa on a level surface, and put Seat Cushion (D6)& Back
Cushion (D7) on the Sofa. Now your sofa is ready for use.
5
x16
F
NOTE:IF ANY SCREW HOLES CANNOT BE ALIGNED,
LOOSEN ALL THE SCREWS AND GO BACK STEP
1 AND RESTART ASSEMBLY.
Tighten all 16 Screws into place with
Allen Key (F).
6

- 9 -
Item
no.
Reference
Image Description Qty.
C1
C2
C3
C4
C5
C6
C7
D
E
F
Right Armrest
Side Panel
Seat Base
Seat Cushion
COMPONENT LIST - RIGHT CORNER SOFA
Back
Side Panel
1
1
1
1
1
1
1
16
1
16
Washer
Back Cushion
M6X35
Head Cap Screws
Allen Key

NOTE:
Do NOT tighten any screws fully first until you have tightened all the
screws.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned, loosen the
screws and tighten sequentially.
If the Corner sofa is not stable it could lead to damage to the product.
Attach the Side Panel (C3) to the Seat Base (C5) by securing with M6*35 Head
Cap Screws (D) and Washers (E). Do this in 2 places.
1
- 10 -
x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
C3
C5
D
E
x2

D
E
Attach the Seat Base (C5) to the Back (C2) by securing with M6*35 Head Cap
Screws (D) and Washers (E). Do this in 2 places.
2
- 11 -
x2
x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
C5
C2
C3

E
D
C2
Attach the Side Panel (C4) to the Seat Base (C5)& Side Panel (C3) & Back (C2) by
securing with M6*35 Head Cap Screws (D) and Washers (E). Do this in 6 places.
3
- 12 -
x6
x6
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
C5
C3
C4

C5
C1
C3
ED
x6
C2
C4
Attach the Right Armrest (C1) to the Seat Base (C5)& Side Panel (C3) & Back (C2)
by securing with M6*35 Head Cap Screws (D) and Washers (E). Do this in 6 places.
4
- 13 -
x6
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.

C6 C7
- 14 -
Place the sofa on a level surface, and put Seat Cushion (C6)& Back
Cushion (C7) on the Sofa. Now your sofa is ready for use.
5
x16
F
NOTE:IF ANY SCREW HOLES CANNOT BE ALIGNED,
LOOSEN ALL THE SCREWS AND GO BACK STEP
1 AND RESTART ASSEMBLY.
Tighten all 16 Screws into place with
Allen Key (F).
6

- 15 -
Item
no.
Reference
Image Description Qty.
G1
G3
G5
G7
G6
Side Panel
Glass
Suction Cup
COMPONENT LIST - TABLE
Side Panel
Table Top
1
1
1
1
4
G2 Side Panel 1
G4 Side Panel 1
D
E
F1
16
16
Washer
M6X35
Head Cap Screws
Allen Key

Attach the two Side Panels (G1&G2) to the Table Top (G5) by securing with
M6*35 Head Cap Screws (D) and Washers (E). Do this in 4 places.
1
- 16 -
x4
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
NOTE:
Do NOT tighten any screws fully first until you have tightened all the
screws.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned, loosen the
screws and tighten sequentially.
If the Table is not stable it could lead to damage to the product.
D
E
G1
x2 x2
G5
G2
G1
G5
E
D

Attach the two Side Panels (G3&G4) to the Table Top (G5) & Side Panels (G1&G2)
by securing with M6*35 Head Cap Screws (D) and Washers (E). Do this in 12 places.
2
- 17 -
x12
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
G4
G3
x6
G2
G1
G3
G5
x6
G1
G2
E
D
ED

G6
x4
- 18 -
Turn the Table over and place on a flat surface, then place the Scution Cup
(G6). Do this in 4 places.
3
x16
F
NOTE:IF ANY SCREW HOLES CANNOT BE ALIGNED,
LOOSEN ALL THE SCREWS AND GO BACK STEP
1 AND RESTART ASSEMBLY.
Tighten all 16 Screws into place with
Allen Key (F).
4

G7
- 19 -
Put the Glass (G7) on the table Top (G5), now your table is ready for us.
5