JONSBO D31 User manual

www.jonsbo.com
D31/D41 SCREEN

*Software not included, “Wallpaper engine” is recommended for wallpaper related, and “AIDA64 extreme” is
recommended for hardware monitoring software
*Interface skin for “ADIA64 Extreme can be downloaded from Jonsbo’s official website
(https://www.jonsbo.com/en/products/D31.html), and loaded for use, can also be designed by yourself.
*It is recommended to use Microsoft Windows OS. If you use other operating systems, you need to set/adapt the
function of the secondary screen by yourself
1
Secondary screen chassis-screen functional accessories list
Secondary screen specifications
A
B
C
D
E
F
8" display secondary screen HDMI to Mini-HDMI data cable
USB Type-A to USB Type-C
Power cable
Replacement case front bezel
Long standoff
HEX wrench socket
* In the case's accessory bag
x1
x1
x1
x1
x1
x2
Interface Description
Button function introduction
TYPE-C
Mini-HDMI
screen brightness +
Screen Brightness –
Turn off the
screen backlight
● Product size: 24.6mm(W) x 131.7(H) x 205.3(L)
● Display size: 8" Color TFT-LCD
● Colors: 16.7M
● Resolution: 1280*800
● Aspect ratio: 16:10

Two-stage angle
adjustment
2
Secondary screen installation: can be used independently or
externally, or installed on the chassis panel
Steps for using the secondary screen externally
1-1
1-2
1-3
1-4
Complete the installation of computer hardware and operating system software by referring to the "Case
Installation Instructions". When Microsoft Windows system is started for the first time, don’t connect the
secondary screen to the system, so as to prevent the host from misidentifying the main display.
* The LCD secondary screen needs to be connected to the HDMI port x1 of the graphics card.
If the number of host ports is insufficient, you need to purchase a suitable adapter cable, such
as "DisplayPort male to HDMI female".
After the system starts up and the main monitor displays normally, connect the secondary screen
MINI-HDMI and TYPE-C interfaces.
F Replacement case front bezel
C
Long standoff
B
HEX wrench socket

3
The steps for installing the secondary screen in the chassis
Before assembling the hardware, it is necessary to complete the pre-installation of HDMI and TYPE-C
cables to avoid difficulty in threading/routing after installing the motherboard and other hardware. When
starting the Microsoft Windows system for the first time, do not connect the port of the secondary screen
to prevent the host from misidentifying the main monitor.
Before using the secondary screen, you need to
use the primary monitor to complete the operating
system installation. After connecting the secondary
screen cable, set the primary monitor of your desktop
as the “primary monitor” in the system according to
the subsequent steps of this manual.
1-1
1-2
1-3
After the system starts up and the main monitor displays normally,
connect the secondary screen with MINI-HDMI and TYPE-C cable to the system
* The LCD secondary screen needs to be connected to the HDMI port x1 of the graphics card.
If the number of host ports is insufficient, you need to purchase a suitable adapter cable, such
as "DisplayPort male to HDMI female".
Secondary screen installation: can be used independently or
externally, or installed on the chassis panel

4
1.The secondary screen manual will be updated in real time based on user feedback. Please visit
https://www.jonsbo.com/en/products/D31.html, or scan the QR code below to get detailed graphic instructions.
D31_SCREEN_USER_GUIDE.PDF D31_SCREEN_USER_GUIDE.DOC
2.Vertical to horizontal display settings for the secondary screen : right-click the desktop of the main screen to pop
up a menu, click "Display settings" - ”Identify", select the icon whose serial number is the secondary screen, slide
down the menu, and change the "Portrait" in the display direction to For "Landscape (flipped)", and finally "Keep changes".
3.Select the secondary screen indicator icon in the settings menu, you can drag it around the main screen for
positioning, which is usually consistent with the actual position of the main/secondary screen. After adjustment,
click "Apply".
Start the system and set the secondary screen display in
the Microsoft WINDOWS system
①
②

6
Software User Guide
Wallpaper Engine Live Wallpaper Setup Guide
This secondary screen can be combined with third-party software, such as Wallpaper Engine, to realize dynamic
video/picture display function; or combined with AIDA64 Extreme to realize hardware status monitoring. For more
detailed instructions, please visit https://www.jonsbo.com/en/products/D31.html, or scan the QR code below for
detailed graphic instructions.
1.To buy/install Wallpaper Engine software from STEAM platform, STEAM platform official website address:
https://store.steampowered.com/
2.Start the software, in the pop-up "Choose Display" setting interface, select the secondary screen or the main
screen you want to set wallpaper, and then click "Change Wallpaper".
3.Choose your favorite wallpaper and click "Subscribe" on the right.
D31_SCREEN_USER_GUIDE.PDF D31_SCREEN_USER_GUIDE.DOC

7
Wallpaper Engine Live Wallpaper Setup Guide
4.In the setting interface of Wallpaper Engine, you can adjust the display logic/display quality as needed to reduce
the consumption of system resources (available for low performance system, usually no separate settings are required).
5.Setup is complete.

8
AIDA64 Extreme Monitoring Interface Setup Guide
1.Install AIDA64 Extreme software and register for activation.
2.Through https://www.jonsbo.com/Upfiles/down/sensorpanel.zip or the QR code below, download the
configuration file with the suffix format "xxxxxx.sensorpanel".
3.In the "File" - "Preferences" - "General" settings, check the following items, and click "Apply":
4.In "Hardware Monitoring" - "SensorPanel" setting, check the following items and click "Apply":
●Load AIDA64 at Windows startup
●"Minimize" button minimizes main window to System Tray
●"Close" button minimizes main window to System Tray
●Hide main window (minimize to System Tray)
●Show SensorPanel
●Prevent SensorPanel from being minimized
●Lock panel size
●Enable context menu
①
②
①
②

9
AIDA64 Extreme Monitoring Interface Setup Guide
5.In the pop-up monitoring initial interface, right-click the pop-up menu, select "SensorPanel Manager", select
"lmport", select the downloaded configuration file with the suffix "xxxxxx.sensorpanel", and select "Open"-"Yes".
①
②
③

10
AIDA64 Extreme Monitoring Interface Setup Guide
6.Under different display (main screen) resolutions/scaling ratios, the icons and texts of the monitoring interface
may be displayed in dislocation. Adjustment method: Open the AIDA64 installation directory, the default installation
address is:" C:\Program Files (x86)\FinalWire\ AIDA64 Extreme", Right-click the icon of the main program "aida64.exe",
and select "Properties"-"Compatibility"-"Change settings for all users"-"Change high DPI settings"-check "Override high
DPI scaling behavior" in the pop-up menu .scaling performed by:" - Select "System (Enhanced)" and step by step
"Apply" the modified settings menu. Finally, right-click the AIDA64 program icon in the lower right corner of the desktop,
select "Exit" and restart the program.
①
②
③
④
⑤⑥
⑦
⑧

12
System Settings FAQ
Question for using Wallpaper Engine
Question for using AIDA64
The secondary screen manual will be updated in real time based on user feedback. Please visit
https://www.jonsbo.com/en/products/D31.html, or scan the QR code below to get detailed graphic instructions.
● How to set automatic pause for wallpaper display to avoid excessive consumption of system resources?
- - - - - - - - - page 4
● How to solve the problem that the secondary screen becomes the main screen? - - - - - - - - - page 5
● The display direction of the secondary screen is wrong? - - - - - - - - - page 4
● How to set the position of the secondary screen and the main screen to be consistent with the actual placement,
so that the mouse operation window movement is more convenient? - - - - - - - - - page 4
● The number of HDMI ports on the graphics card is not enough to connect the secondary screen and the main
screen at the same time? - - - - - - - - - page 3, Adapter cable to be purchased separately
● AIDA64 monitoring interface icons, text, etc. are misplaced, and the display is abnormal? - - - - - - - - - page 10
● My system is in traditional Chinese or other languages, and the monitoring interface displays garbled characters?
- - - - - - - - - “File” - “Preferences” - “Language” - select the language corresponding to the windows system
● AIDA64 cannot read a certain hardware parameter? - - - - - - - - - Right-click the monitoring interface - select
"SensorPanel Manager" - double-click the unreadable item - replace with an item that can read the data correctly
- export a new configuration file
● The opened program or window cannot be displayed on the main screen? - - - - - - - - - Right-click the AIDA64 icon
in the lower right corner of the desktop - select "Hide SensorPanel" - remove the program window covered by the
monitoring interface - select "Show SensorPanel" again
● When the monitoring interface is dragged to the secondary screen, the size cannot be adapted? - - - - - - - - - page 11
D31_SCREEN_USER_GUIDE.PDF D31_SCREEN_USER_GUIDE.DOC

www.jonsbo.com