Journey Perfect Sleep Chair User manual

PRODUCT MANUAL
®
®
This appliance is not intended for use by persons
(including children) with reduced physical,sensory
or mental capabilities, or lack of experience and
knowledge, unless they have beengiven supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Choose Location for assembly with below in mindLevel, Spacious,
Clean and close to area item will used.
To protect floor surfaceand product we recommend the use of a
soft clean blanket or like item on your work space.
Pre-Assembly Preparation
Instruction Manual
Page 1 of
6
www.shopjourney.com
NOTE: If you ever lose or misplace your copy of this manual, you can access the manual at our website.

2
®
I. INTRODUCTION
Welcome to Journey Health & Lifestyle!
Thank you for purchasing your Perfect Sleep Chair®. You have invested in a high quality
product made of premium materials that will facilitate comfort and safety.
Purchaser’s Agreement
By accepting delivery of this product, you promise that you will not change, alter, or
modify this product or remove or render inoperable or unsafe any guards, shields, or other
safety features of this product; fail, refuse, or neglect to install any retrofit kits from time to
time provided to enhance or preserve the safe use of this product.
Modifications
You should not modify, add, remove, or disable any feature, part, or function of your lift
chair. Unauthorized modifications may lead to personal injury and/or product damage and
may also void your product’s warranty.
NOTE: Use only manufacturer parts for all repairs and replacements.
Weight Limitations
Your lift chair is rated for a maximum weight capacity of 375 lbs.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

3
®
II. SAFETY WARNINGS
Safety Warnings and Advice
• Do not allow children to play on the chair.
• Always leave the chair in an upright closed position.
• Keep hands and feet clear of the mechanism.
• Only the occupant should operate the chair.
• Please check under chair before lowering chair for small children and/or pets in
the house.
• Do not sit or lean on the arms of the chair.
• Do not stand on the chair.
• Do not drag the chair. Always lift with the help of a second person.
• Do not allow items to be entangled with the mechanism (i.e. blankets, pillows, clothing).
• Please be aware that electricity flows from the power point to the transformer
underneath the chair. This should be treated with respect and any liquid spilled may
cause problems with the motor. If you are concerned that liquid has aected any
electrical parts of the chair, do not reconnect it. Consult your local electrician for a safety
check.
• The product you have purchased combines state-of-the-art components with safety,
comfort, and styling in mind. Read and follow all instructions, warnings, and notes in this
manual and all other accompanying literature before attempting to operate this product
for the first time. If there is any information in this manual which you do not understand,
or if you require additional assistance for setup or operation, please contact Journey
Health & Lifestyle Customer Service. Failure to follow the instructions, warnings, and
notes in this manual and those located on your product can result in personal injury or
product damage and will void the product warranty.
• Your Perfect Sleep Chair has been engineered to provide the ultimate in strength and
reliability. Great care has been taken to provide you with total comfort and safety.
• You are required to exercise caution when operating your chair to ensure your personal
safety and that of others around you. The Safety Warning and Advice herein are rules for
the safe operation of your Perfect Sleep Chair.
• Care should be taken in the unpacking of this unit, so as not to cause injury to persons or
damage to the unit. Dispose of all plastic bags and covers, as they can be a smothering
hazard to small children.

4
®
II. SAFETY WARNINGS
Safety Warnings and Advice
• Do not allow children or pets near the chair while the chair is operating.
• Do not allow children to play with or operate the chair at any time.
• Hand control should be unplugged and placed out of the reach of children when the
chair is not in use.
• Do not flop down into the chair when getting into it, or while it is in its lift position.
Flopping down into the chair will damage it and could cause personal injury.
• Do not allow anyone to sit on your lap, or on the arm of the chair, or on the footrest
while in or operating the chair, as it may cause tipping and could result in personal injury.
• Do not place fingers or hands between the seat cushion and the inside arm of the chair
while sitting in the chair or when the chair is in operation or plugged into a power
source.
• Do not retrieve fallen objects from inside or under the chair while the chair is plugged
into a power source.
• Do not operate the chair if there are any persons, pets or other obstructions under or in
front of the footrest, under the chair or behind the chair.
• Do not position yourself, child and/or pet too high on the chair while the chair back is
reclined. This can cause a tip over hazard. Make sure you are properly fitted for the lift
chair prior to operating the chair.
• Do not smoke while operating, sitting or resting in the chair.
• To reduce risk of electrical shock, do not immerse any of the electrical components into
a liquid, or spill any liquids onto electrical components. Do not open any of the electrical
components.
• Warranty will be void if any of the electrical components are opened by other than a
qualified service person.
• Make sure the chair is placed at a safe distance from a wall/ corner, so that when fully
reclined it will not make contact with the wall. Failure to do so can damage the chair and
will void the warranty.
• Do not use any type of electrical extension cord to plug your chair into an electrical
outlet. Make sure that all electrical products and their wires are positioned away from
your chair as the metal lift frame mechanism could crush them and create a fire hazard
and/or may cause personal injury.
• Do not operate your lift chair while intoxicated or taking medications that impair your
mental or physical abilities to operate the chair safely. Consult with your doctor about any
medications you are taking that may aect the safe operation of the chair.

5
®
II. SAFETY WARNINGS
Safety Warnings and Advice
• Do not operate this product if you have any medical conditions that result in limited, debilitating
mental or physical capacity. You should consult your doctor before using this product.
• Placing the lift chair in the center of a room or too far away from a wall will create a tripping
hazard, because the power wires for the lift chair will be crossing main trac areas in the
residence.
• Leakage from the 9V DC backup batteries can result in property damage. Periodically inspect
and replace the batteries.
• Store hand control in pocket to avoid it inadvertently becoming activated in a way that may
force the user out of the chair.
• Should you ever encounter a problem with the operation of your Perfect Sleep Chair,
discontinue all use of the product upon discovery of the problem. Contact Journey Health &
Lifestyle Customer Service to arrange service.
• Exceeding the stated weight limit listed in this manual can result in instability of the chair,
causing a potential tip over hazard.
• Consult this product manual and a physician to determine if you are capable of moving or lifting
the chair, as this will cause serious injury if not done properly.
• Verify that all objects including hands and fingers are not between the arm of the chair and
the seat cushion before operating the lift or recline as this will result in property damage or
serious injury.
• This is an electrical device and will be impacted by any power failure.
• To operate this chair properly, you must read and understand the intended use of the product,
and overall operation of the chair as misuse, or lack of proper training may lead to serious injury.
• Use extreme care when unpacking, assembling, and disassembling of this unit, so as not to
cause injury to persons or damage to the unit.

6
®
CONTENTS
I. INTRODUCTION
II. SAFETY WARNINGS
III. PARTS CHECKLIST + PRE-ASSEMBLY
IV. STEP BY STEP ASSEMBLY GUIDE
V. OPERATION GUIDE
VI. CONSUMER LIMITED WARRANTY
VII. DIMENSIONS
VIII. FOR YOUR RECORDS
..................................................................................... 2
.............................................................................. 3
................................................. 7
....................................................... 8
............................................................................... 9
...................................................... 12
........................................................................................ 13
.......................................................................... 14

7
®
III. PARTS CHECKLIST + PRE-ASSEMBLY
Pre-Assembly Preparation
Choose a location for assembly that is level, spacious, and clean.
To protect your floor surface and the product, we recommend the use of a soft clean
blanket (or something similar) on your work space.
Parts Checklist
Page
2
of
6
Parts Checklist
CHAIR BASE
BACKREST WAIST PILLOW
PRODUCT ASSEMBLY - Step by step guide
step
1
step
2
velcro
1. Hold the back and try to connect the back
to the base with 2 brackets.
2. Press the back from the top a little harder
until you hear the "click", means the back
and base get engaged completely.
3. Connect the electric wire from base and
back, electric wires are assorted by colors,
make sure connect the same color wire.
4. Pick up the remote control from the side
pocket and start enjoying the chair (Remote
control is pre-assembled)
HINTS &TIPS
Reverse side of Velcro located under chair base.
Ensure to make a smooth as possible.
Page
2
of
6
Parts Checklist
CHAIR BASE
BACKREST WAIST PILLOW
PRODUCT ASSEMBLY - Step by step guide
step
1
step
2
velcro
1. Hold the back and try to connect the back
to the base with 2 brackets.
2. Press the back from the top a little harder
until you hear the "click", means the back
and base get engaged completely.
3. Connect the electric wire from base and
back, electric wires are assorted by colors,
make sure connect the same color wire.
4. Pick up the remote control from the side
pocket and start enjoying the chair (Remote
control is pre-assembled)
HINTS &TIPS
Reverse side of Velcro located under chair base.
Ensure to make a smooth as possible.
Page
2
of
6
Parts Checklist
CHAIR BASE
BACKREST WAIST PILLOW
PRODUCT ASSEMBLY - Step by step guide
step
1
step
2
velcro
1. Hold the back and try to connect the back
to the base with 2 brackets.
2. Press the back from the top a little harder
until you hear the "click", means the back
and base get engaged completely.
3. Connect the electric wire from base and
back, electric wires are assorted by colors,
make sure connect the same color wire.
4. Pick up the remote control from the side
pocket and start enjoying the chair (Remote
control is pre-assembled)
HINTS &TIPS
Reverse side of Velcro located under chair base.
Ensure to make a smooth as possible.
Backrest Chair Base Bolster Pillow

8
®
IV. STEP BY STEP ASSEMBLY GUIDE
Step 1
1. Hold the back and connect the back to the
base with 2 brackets.
2. Press the back from the top a little harder until
you hear the “click”, means the back and base
have engaged completely.
3. Connect the electric wire from base and back,
electric wires are distinguished by colors, make
sure to connect the same color wire.
4. Pick up the remote control from the side pocket
and start enjoying the chair (Remote control is
pre-assembled).
Step 2
Press the back of the chair at the top until you hear a click, ensuring the back and base are
connected correctly.
Step 3
Add the bolster pillow to support your back and to fully enjoy the chair.
Page
2
of
6
Parts Checklist
CHAIR BASE
BACKREST WAIST PILLOW
PRODUCT ASSEMBLY - Step by step guide
step
1
step
2
velcro
1. Hold the back and try to connect the back
to the base with 2 brackets.
2. Press the back from the top a little harder
until you hear the "click", means the back
and base get engaged completely.
3. Connect the electric wire from base and
back, electric wires are assorted by colors,
make sure connect the same color wire.
4. Pick up the remote control from the side
pocket and start enjoying the chair (Remote
control is pre-assembled)
HINTS &TIPS
Reverse side of Velcro located under chair base.
Ensure to make a smooth as possible.
Page
2
of
6
Parts Checklist
CHAIR BASE
BACKREST WAIST PILLOW
PRODUCT ASSEMBLY - Step by step guide
step
1
step
2
velcro
1. Hold the back and try to connect the back
to the base with 2 brackets.
2. Press the back from the top a little harder
until you hear the "click", means the back
and base get engaged completely.
3. Connect the electric wire from base and
back, electric wires are assorted by colors,
make sure connect the same color wire.
4. Pick up the remote control from the side
pocket and start enjoying the chair (Remote
control is pre-assembled)
HINTS &TIPS
Reverse side of Velcro located under chair base.
Ensure to make a smooth as possible.
Page
3
of
6
step
3
Lift Chair Electrical How to Operate
HINTS &TIPS
Plug & Play:
① Power Plug and Cord located at above the seat cushion.
② Hand controller located in pocket on side of chair base.
Ensure there are no tangles in cord before you plug in.
③ Charging port located in side of armrest .
②
①
③

9
®
V. OPERATION GUIDE
Plug & Play:
1. Power Plug and Cord located at the back of the seat cushion.
2. Hand controller located in pocket on side of chair base.
Ensure there are no tangles in cord before you plug in the chair.
3. Charging port located alongside armrest.
How to Operate The Perfect Sleep Chair®
Page
3
of
6
step
3
Lift Chair Electrical How to Operate
HINTS &TIPS
Plug & Play:
① Power Plug and Cord located at above the seat cushion.
② Hand controller located in pocket on side of chair base.
Ensure there are no tangles in cord before you plug in.
③ Charging port located in side of armrest .
②
①
③

10
®
V. OPERATION GUIDE
Button Title Functionality
Sit Returns chair to a seated position
Back Up Raises back
Back Down Reclines back
Lift Raises seat and back towards standing
Sleep Lowers seat and back towards flat
Foot Up Raises footrest
Foot Down Lowers footrest
Massage Mode
Press 1x for PULSE (Blue)
Press 2x for WAVE (Green)
Press 3x for CONSTANT (Red)
Press 4x to turn OFF
Massage Intensity
Low (Blue)
Medium (Green)
High (Red)
Massage Heat Press 1x for LOW (Green)
Press 2x for HIGH (Red)
Page
4
of
6
PRODUCT OPERATION - HAND CONTROLLER PRODUCT OPERATION - Unfold
JOURNEY
HEAT
BACK
DOWN
UP
UP
DOWN
FOOT
INTENSITY
LIFT SLEEP
MASSAGE
MODE SPEED
MASSAGE
Button Titled Functionality
Heat:
Cilck HEAT once fot Low setting
Click HEAT twice forr High setting
Back Up: To rise back only
Back Down:
To lower back only
Lift:
To rise the seat & back simultaneously
Sleep: To lower the seat & back simultaneously
Foot Up: Rise the footrest only
Foot Down:
Lower the footrest only
Masssage Mode:
Clik 1x for Pulse mode
Clik 2x for Wave mode
Clik 3x for Constant mode
Clik 4x for Pulse wave & Constant
Clik 5x to Turn OFF
Massage Speed: 6 Settings. Every Click increasas speedb rate starting
from Low to High
Massage Zone: Backrest & Seat function together
6 Setttings. Every click increases the strength starting
from Low to High
Intensity
1
Hand Controller Full Recline