Joy-it Arduino Nano V3 User manual

3
Arduino Nano V3

Published: 04.04.2018 Copyright by Joy-IT 2
3Arduino Nano V3
Index
1. Introducon
2. Installaon
3. Usage
4. Support

Published: 04.04.2018 Copyright by Joy-IT 3
3Arduino Nano V3
1. Introduction
Dear customer,
thank you for choosing our product.
In the following, we will show you how to use your product.
Should you encounter any unexpected problems during use, please do not hesitate to contact us.

Published: 04.04.2018 Copyright by Joy-IT 4
3Arduino Nano V3
2. Installation
To use the Arduino Nano, you rst need the appropriate Arduino soware. This is available here.
Download and install the soware package (Arduino IDE).
Aer you have started the soware, it must be set to the board.
Open the "Tools" tab and select the "Arduino Nano" board under "Boards".

Published: 04.04.2018 Copyright by Joy-IT 5
3Arduino Nano V3
3. Usage
The soware is now congured and ready for use.
Now connect your Arduino Nano to your computer with a mini USB cable.
To check the basic funcons of the board, you can transfer a short example program to your Arduino
Nano.
Select the "Examples" menu on the "File" tab and the "Blink" example under "01.Basics".
Transfer this program to your Arduino.
It will acvate the built-in LED, which is connected to digital pin 13, and switch it on and o repeatedly.
All important connecons are also marked here:

Published: 04.04.2018 Copyright by Joy-IT 6
3Arduino Nano V3
4. Support
We also support you aer your purchase. If there are any quesons le or if you encounter any problems,
please feel free to contact us by mail, phone or by our cket-supportsystem on our website.
E-Mail: [e-mail]
Ticket-System: hp://support.joy-it.net
Phone: [phone] – 66 (11- 18 Uhr)
Please visit our website for more informaons:
www.joy-it.net