Joyolight DIM User manual

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[e-mail]
1-877-849-1942 (US)
647-496-8107 (CA)
Receivers &
Controllers
Manual USER MANUAL
DIM/CCT/RGB/RGBW/RGB2W
2022-05
Receiver
1. RE-501-WIFI
2. RE-401-2.4G
#12, 5200 Dixie Rd,
Mississauga, ON
Canada L4W 1E4
www.joyolight.ca
[email protected]
Controller
1. CON-KNOB-1Z
2. CON-RGB-1Z
3. CON-WH-1Z
4. CON-MULTI-4Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Receiver
RE-501-WIFI CON-401-2.4G
Controller
CON-KNOB-1Z CON-RGB-1Z CON-WH-1Z CON-MULTI-4Z CON-KNOB-1Z CON-RGB-1Z CON-WH-1Z CON-MULTI-4Z
LED
type
Single
Color
CCT
(CW+WW)
RGB
RGBW
RGB2W
www.hoionlighting.com
1/ 6
HX-DLV005
5 in 1 WIFI led controller for DIM/CCT/RGB/RGBW/RGBCW
Controller adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used
for controlling constant voltage LED lamps. For instance, point source of light, flexible light strip, led
modules, led strings and so on; It belongs to low-voltage DC power input and output with six interfaces,
including V+ is extremely common interfaces, the other five for the 5 channels output control interface.
Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting
effects through RF remote control. Especially, it is integrated 5 optional programs for different color type
LEDs, contains single color/CW+WW/RGB/RGBW/RGBCW. It means only one item stock for 5 types
applications. Support both RF remote control and WIFI control. The WIFI control technology powered by
Tuya.
Product Features
Short-circuit protection.
RF remote control+ WIFI control.
WIFI technology powered by Tuya, And compatible with voice control via Amazon Alexa, Google
Assistant, Yandex Alice and so on.
PWM frequency is adjustable, 2KHz or 21.6KHz.
Compatible with 16 items RF remote controls for options, meet for different applications.
Memory function, each time power-on reserve the mode which stop in the last power-off.
Designed for constant voltage LED lights, program is settable for DIM/CCT/RGB/RGBW/RGBCW.
DC12-24 V, 5 channels output, Max. load current: 4A*5CH; Max. load power: 240W/12V; 480W / 24 V.
Warranty of this product is three years, exclude the artificial situation of damaged or overload working.
www.hoionlighting.com
1/ 5
HX-D002
D002 wireless-sync-control led controller for DIM/CCT/RGB/RGBW
Controller adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used
for controlling constant voltage LED lamps. For instance, point source of light, flexible light strip, led
modules, led strings and so on; especially, it is integrated 4 optional programs for different color type LEDs,
contains single color/CW+WW/RGB/RGBW. It means only one item stock for 4 types applications.
Product Features
Designed for DIM/CCT/RGB/RGBW constant voltage LED lights.
DC12-24V, four channels output, Max. load current: 4CH*4A; Max. load power: 192W/12 V; 384W/ 2 4V.
Adopts RF remote control, no need line-of-sight. 4 zones separately control or all-control.
Wireless-sync-control in both static color and dynamic modes, unlimited by remote control distance.
Batch-operation is available for RF code matching/clearing between remote control and receivers.
Memory function, each time power-on reserve the mode which stop in the last power-off.
Perfect control effect, including 1024 static colors(RGB/RGBW) and soft dim function.
The brightness of static color is adjustable, 1024 levels in total; the speed of dynamic changes is
adjustable, 100 levels in total.
Long-press the brightness and speed key can get the fast adjustment, convenient for operation.
Warranty of this product is three years, exclude the artificial situation of damaged or overload working.
Shenzhen Hoion Lighting Co.,Limited http://www.hoionlighting.com
2/ 5
1. Product photo
2. Features:
1) Working voltage: 3V (AAA*2);
2) DIM/CCT/RGB/RGBW 4 in 1;
3) Come with holder, easier access and keeping;
4) Easy to access and store with magnetic suction;
5) Circular knob design, unique interface and easy operation;
6) Functions: ON/OFF, dim function, colors, dynamic modes;
7) Adopts RF 2.4GHz wireless control, remote control distance up to 30m and no directional;
8) RFBT15 compatible with HD/HC/QD/QC/DLC/DLS/DLK/T2/T3 series products, please contact hoion
for more information;
9) 3 years warranty.
3. Technical Parameters
Working temperature
-20-60℃
Working voltage
3V(AAA*2PCS)
Sleep current
<25uA
Emissio n current
<17mA
Sleep power consumption
<75uW
Emission power consumption
<51mW
Net weight
80g
Dimension
Φ60*35mm
RF distance
≤30m
RF frequency
2.4GHz
Accessori es
holder 1pc, 3M foam sponge glue 1pc.
4. Control Function
Shenzhen Hoion Lighting Co.,Limited http://www.hoionlighting.com
2/ 5
1. Product photo
2. Features:
1) Working voltage: 3V (AAA*2);
2) DIM/CCT/RGB/RGBW 4 in 1;
3) Come with holder, easier access and keeping;
4) Easy to access and store with magnetic suction;
5) Circular knob design, unique interface and easy operation;
6) Functions: ON/OFF, dim function, colors, dynamic modes;
7) Adopts RF 2.4GHz wireless control, remote control distance up to 30m and no directional;
8) RFBT15 compatible with HD/HC/QD/QC/DLC/DLS/DLK/T2/T3 ser ies products, please contact hoion
for more information;
9) 3 years warranty.
3. Technical Parameters
Working temperature
-20-60℃
Working voltage
3V(AAA*2PCS)
Sleep current
<25uA
Emissio n current
<17mA
Sleep power consumption
<75uW
Emission power consumption
<51mW
Net weight
80g
Dimension
Φ60*35mm
RF distance
≤30m
RF frequency
2.4GHz
Accessori es
holder 1pc, 3M foam sponge glue 1pc.
4. Control Function
www.hoionlighting.com
4/ 6
some options from below recommend.
LED type
Recommend remote control
Single color
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
CW+WW
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
RGB
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGB-2.4G (1-zone)
RGBW/
RGB+W
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBW-2.4G (1-zone)
RGBCW/
RGB+CCT
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBCW-2.4G (1-zone)
Tips:
1. This controller is also compatible with other remote controls, please contact us for more information.
2. Please refer to the remote control specifications for features and functions.
Wireless-synchronization function
Controllers will transmit the control signals from the remote control and self-inspection the work statues for each
other, so multiple receivers in same zone will wireless-sync-work completely, not only static mode but also
dynamic mode, to achieve wired-like operation experience. And it is flexible to combine with the scene control
function of WIFI control.
www.hoionlighting.com
4/ 6
some options from below recommend.
LED type
Recommend remote control
Single color
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
CW+WW
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
RGB
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGB-2.4G (1-zone)
RGBW/
RGB+W
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBW-2.4G (1-zone)
RGBCW/
RGB+CCT
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBCW-2.4G (1-zone)
Tips:
1. This controller is also compatible with other remote controls, please contact us for more information.
2. Please refer to the remote control specifications for features and functions.
Wireless-synchronization function
Controllers will transmit the control signals from the remote control and self-inspection the work statues for each
other, so multiple receivers in same zone will wireless-sync-work completely, not only static mode but also
dynamic mode, to achieve wired-like operation experience. And it is flexible to combine with the scene control
function of WIFI control.
www.hoionlighting.com
4/ 6
some options from below recommend.
LED type
Recommend remote control
Single color
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
CW+WW
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
RGB
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGB-2.4G (1-zone)
RGBW/
RGB+W
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBW-2.4G (1-zone)
RGBCW/
RGB+CCT
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBCW-2.4G (1-zone)
Tips:
1. This controller is also compatible with other remote controls, please contact us for more information.
2. Please refer to the remote control specifications for features and functions.
Wireless-synchronization function
Controllers will transmit the control signals from the remote control and self-inspection the work statues for each
other, so multiple receivers in same zone will wireless-sync-work completely, not only static mode but also
dynamic mode, to achieve wired-like operation experience. And it is flexible to combine with the scene control
function of WIFI control.
www.hoionlighting.com
4/ 6
some options from below recommend.
LED type
Recommend remote control
Single color
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
CW+WW
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
RGB
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGB-2.4G (1-zone)
RGBW/
RGB+W
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBW-2.4G (1-zone)
RGBCW/
RGB+CCT
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBCW-2.4G (1-zone)
Tips:
1. This controller is also compatible with other remote controls, please contact us for more information.
2. Please refer to the remote control specifications for features and functions.
Wireless-synchronization function
Controllers will transmit the control signals from the remote control and self-inspection the work statues for each
other, so multiple receivers in same zone will wireless-sync-work completely, not only static mode but also
dynamic mode, to achieve wired-like operation experience. And it is flexible to combine with the scene control
function of WIFI control.
www.hoionlighting.com
4/ 6
some options from below recommend.
LED type
Recommend remote control
Single color
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
CW+WW
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
RGB
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGB-2.4G (1-zone)
RGBW/
RGB+W
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBW-2.4G (1-zone)
RGBCW/
RGB+CCT
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBCW-2.4G (1-zone)
Tips:
1. This controller is also compatible with other remote controls, please contact us for more information.
2. Please refer to the remote control specifications for features and functions.
Wireless-synchronization function
Controllers will transmit the control signals from the remote control and self-inspection the work statues for each
other, so multiple receivers in same zone will wireless-sync-work completely, not only static mode but also
dynamic mode, to achieve wired-like operation experience. And it is flexible to combine with the scene control
function of WIFI control.
www.hoionlighting.com
4/ 6
some options from below recommend.
LED type
Recommend remote control
Single color
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
CW+WW
RFBT10-2.4G（（4-zone））
RFBT12 (1-zone)
RFBT15 (1-zone)
RGB
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGB-2.4G (1-zone)
RGBW/
RGB+W
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBW-2.4G (1-zone)
RGBCW/
RGB+CCT
RFBK-RGB-2.4G（（4-zone））
RFBT02 (1-zone)
HWP86-RGBCW-2.4G (1-zone)
Tips:
1. This controller is also compatible with other remote controls, please contact us for more information.
2. Please refer to the remote control specifications for features and functions.
Wireless-synchronization function
Controllers will transmit the control signals from the remote control and self-inspection the work statues for each
other, so multiple receivers in same zone will wireless-sync-work completely, not only static mode but also
dynamic mode, to achieve wired-like operation experience. And it is flexible to combine with the scene control
function of WIFI control.
Receiver-Controller Matching Chart

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
RECEIVER 1
RE-501-WIFI
For DIM/CCT/RGB/RGBW/RGB2W
Features
Output: 3-5 channels
Gray-scale: 1024 levels
Working Voltage: DC12~24V
Connecting Mode: common anode
Speed stage: 1024 levels;
RF Frequency: 2.4GHz;
Max. output current: PWM=2KHz:4A/CH,
PWM=21.6KHz:3A/CH
Max. output power: 12V:<240W, 24V:<480W
External size: L160*W46*H25mm
Net Weight: 110g;
Short circuit protection: Yes
Memory function: Yes
TUYA APP for IOS/Android
• Short-circuit protection.
• RF remote control+ WIFI control.
• WIFI technology powered by Tuya, And compatible with voice
control via Amazon Alexa, Google Assistant, Yandex Alice and
so on.
• PWM frequency is adjustable, 2KHz or 21.6KHz.
• Compatible with 16 items RF remote controls for options, meet
different applications.
• Memory function; It will reserve the last used mode.
• Designed for constant voltage LED lights, the program is setta-
ble for DIM/CCT/RGB/RGBW/RGB2W.
• DC12-24V, 5 channels output, Max. load current: 4A*5CH; Max.
load power: 240W/12V; 480W/24V.
DIM CCT RGB RGBW RGB2W
12341234123412341234
OFF OFF OFF ON OFF OFF OFF ON OFF ON ON OFF ON
PWM=2KHz PWM=21.6KHz
12341234
OFF ON
www.hoionlighting.com
2/ 6
Technical Parameters
Working temperature
-20-60℃
Supply voltage
DC12V-24V
Static power consumption
<1W
Connecting mode
Common anode
Grayscale
1024 levels
Speed stage
1024 levels
External dimension
L160*W46*H25 mm
Packing size
L170*W50*H29mm
Net weight
110g
Gross weight
125g
RF frequency
2.4GHz
RF distance
≤20m
Short circuit protection
Yes
Memory function
Yes
Output
3-5 channels
Max. Output current
PWM=2KHz: 4A/CH
PWM=21.6KHz: 3A/CH
PWM frequency
2KHz, 21.6KHz
Max. Output power
12V:<240W, 24V:<480W
Dimensions
Interface Specifications
1. Signal indicator status and description: it will light up when operating the remote control; it will stay on
after a successful WIFI connection.
2. The 1-3 bits of the DIP switch are used to set the load output type, corresponding to the following:
DIM
CCT
RGB
RGBW
RGBCW
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
OFF
OFF
OFF
X
ON
OFF
OFF
X
OFF
ON
OFF
X
ON
ON
OFF
X
X
X
ON
X
Note: After setting the load output type, the WIFI control function needs to be reset, and the "add device"
operation should be performed again in the APP. If the type is switched in the power-on state, the controller
Indicator light
LED
Output
Reset Key
DIY Switch
Power Input
Interface Specications
1. Signal indicator status and description:
it will light up when operating the remote
control; it will stay on after a successful WIFI
connection.
2. The 1-3 bits of the DIP switch are used to
set the load output type, corresponding to the
following:
3. DIP switch 4 is used to set the PWM fre-
quency of the load output: OFF-2KHz (factory
default value), ON-21.6KHz.
Note: After setting the load output type, the WIFI control function
needs to be reset, and the “add device” operation should be performed
again in the APP. If the type is switched in the power-on state, the con-
troller will automatically reset, and will directly enter the EZ distribution
network state after the load light ashes quickly. For more connection
instructions, please refer to the “ Direction for use -WIFI Network
Operation” section.
INS 2022-03
RE-501-WIFI

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Direction for use
WIFI controlled by Tuya Application to achieve smart control like group
control, scene control, timer control, music control and so on. It is also
compatible with voice control via Amazon Alexa, Google Assistant,
Yandex Alice and so on.
Scan QR code from controller to download Tuya application
and register it to get your home account.
WiFi- Smart Controller can be added using “EZ Mode”- Auto
Scan or “AP Mode”-Add Manually.
EZ Mode: Press and hold the “Key” button for 5s to restore
to the factory setting and enter EZ mode (Rapid Blinking).
AP Mode: Unplug and reconnect the power supply and the
WiFi Smart Controller 5 times in a short period of time to enter
AP mode (Slow Blinking).
Tips:
1. If the Wi-Fi signal is weak or cannot connect with the device using
“EZ Mode”, please tap the “EZ Mode” on the top right corner and tap
“AP Mode” to enter the AP mode to add the device and follow the App
instructions to connect the Wi-Fi Smart Controller to your network.
2. After setting the load output type, the WIFI control function also
needs to be reset, and the “add device” operation should be performed
again in the APP.
1) If the load type is reset in the power-on state, the controller
will automatically reset, and will directly enter the EZ distribution
network state after the load light ashes quickly.
At this time, the load light will keep ashing, and the network
connecting operation can be performed, or you can press any button
on the remote control to stop the light ashing (still at the network
connecting status in 3 minutes); if there is no operation, it will
automatically exit after 3 minutes.
2) If the load type is reset in the power-off state, please refer to the
above instruction to connect the network by EZ Mode or AP Mode.
Wireless-synchronization function
The controllers will transmit the control signals from the
remote control and self-inspect the working statuses
for each other. Thus, multiple receivers in the same area
will synchronize wirelessly, not only in static mode, but
also in dynamic mode, to achieve a cable-like operating
experience.
In order to achieve a perfect wireless synchronization
effect, please keep the distance between receivers within
10 meters as shown below.
www.hoionlighting.com
5/ 6
In order to achieve perfect wireless synchronization effect, please keep the distance between receivers within 10
meters as above show.
Typical Applications
Application Circuit of single color
Application Circuit of CW+WW
INS 2022-03
RE-501-WIFI

www.hoionlighting.com
2/ 6
Technical Parameters
Working temperature
-20-60℃
Supply voltage
DC12V-24V
Static power consumption
<1W
Connecting mode
Common anode
Grayscale
1024 levels
Speed stage
1024 levels
External dimension
L160*W46*H25 mm
Packing size
L170*W50*H29mm
Net weight
110g
Gross weight
125g
RF frequency
2.4GHz
RF distance
≤20m
Short circuit protection
Yes
Memory function
Yes
Output
3-5 channels
Max. Output current
PWM=2KHz: 4A/CH
PWM=21.6KHz: 3A/CH
PWM frequency
2KHz, 21.6KHz
Max. Output power
12V:<240W, 24V:<480W
Dimensions
Interface Specifications
1. Signal indicator status and description: it will light up when operating the remote control; it will stay on
after a successful WIFI connection.
2. The 1-3 bits of the DIP switch are used to set the load output type, corresponding to the following:
DIM
CCT
RGB
RGBW
RGBCW
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
OFF
OFF
OFF
X
ON
OFF
OFF
X
OFF
ON
OFF
X
ON
ON
OFF
X
X
X
ON
X
Note: After setting the load output type, the WIFI control function needs to be reset, and the "add device"
operation should be performed again in the APP. If the type is switched in the power-on state, the controller
www.hoionlighting.com
2/ 6
Technical Parameters
Working temperature
-20-60℃
Supply voltage
DC12V-24V
Static power consumption
<1W
Connecting mode
Common anode
Grayscale
1024 levels
Speed stage
1024 levels
External dimension
L160*W46*H25 mm
Packing size
L170*W50*H29mm
Net weight
110g
Gross weight
125g
RF frequency
2.4GHz
RF distance
≤20m
Short circuit protection
Yes
Memory function
Yes
Output
3-5 channels
Max. Output current
PWM=2KHz: 4A/CH
PWM=21.6KHz: 3A/CH
PWM frequency
2KHz, 21.6KHz
Max. Output power
12V:<240W, 24V:<480W
Dimensions
Interface Specifications
1. Signal indicator status and description: it will light up when operating the remote control; it will stay on
after a successful WIFI connection.
2. The 1-3 bits of the DIP switch are used to set the load output type, corresponding to the following:
DIM
CCT
RGB
RGBW
RGBCW
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
OFF
OFF
OFF
X
ON
OFF
OFF
X
OFF
ON
OFF
X
ON
ON
OFF
X
X
X
ON
X
Note: After setting the load output type, the WIFI control function needs to be reset, and the "add device"
operation should be performed again in the APP. If the type is switched in the power-on state, the controller
www.hoionlighting.com
2/ 6
Technical Parameters
Working temperature
-20-60℃
Supply voltage
DC12V-24V
Static power consumption
<1W
Connecting mode
Common anode
Grayscale
1024 levels
Speed stage
1024 levels
External dimension
L160*W46*H25 mm
Packing size
L170*W50*H29mm
Net weight
110g
Gross weight
125g
RF frequency
2.4GHz
RF distance
≤20m
Short circuit protection
Yes
Memory function
Yes
Output
3-5 channels
Max. Output current
PWM=2KHz: 4A/CH
PWM=21.6KHz: 3A/CH
PWM frequency
2KHz, 21.6KHz
Max. Output power
12V:<240W, 24V:<480W
Dimensions
Interface Specifications
1. Signal indicator status and description: it will light up when operating the remote control; it will stay on
after a successful WIFI connection.
2. The 1-3 bits of the DIP switch are used to set the load output type, corresponding to the following:
DIM
CCT
RGB
RGBW
RGBCW
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
OFF
OFF
OFF
X
ON
OFF
OFF
X
OFF
ON
OFF
X
ON
ON
OFF
X
X
X
ON
X
Note: After setting the load output type, the WIFI control function needs to be reset, and the "add device"
operation should be performed again in the APP. If the type is switched in the power-on state, the controller
www.hoionlighting.com
2/ 6
Technical Parameters
Working temperature
-20-60℃
Supply voltage
DC12V-24V
Static power consumption
<1W
Connecting mode
Common anode
Grayscale
1024 levels
Speed stage
1024 levels
External dimension
L160*W46*H25 mm
Packing size
L170*W50*H29mm
Net weight
110g
Gross weight
125g
RF frequency
2.4GHz
RF distance
≤20m
Short circuit protection
Yes
Memory function
Yes
Output
3-5 channels
Max. Output current
PWM=2KHz: 4A/CH
PWM=21.6KHz: 3A/CH
PWM frequency
2KHz, 21.6KHz
Max. Output power
12V:<240W, 24V:<480W
Dimensions
Interface Specifications
1. Signal indicator status and description: it will light up when operating the remote control; it will stay on
after a successful WIFI connection.
2. The 1-3 bits of the DIP switch are used to set the load output type, corresponding to the following:
DIM
CCT
RGB
RGBW
RGBCW
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
OFF
OFF
OFF
X
ON
OFF
OFF
X
OFF
ON
OFF
X
ON
ON
OFF
X
X
X
ON
X
Note: After setting the load output type, the WIFI control function needs to be reset, and the "add device"
operation should be performed again in the APP. If the type is switched in the power-on state, the controller
Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
JLS2240CCT
+24V
C
W
+24V+24V
--
+24V
C
W
+24V+24V
--
Connection Diagram
JLS560RGB
JLS560RGBW
Application Circuit 1: Single Color
Application Circuit 2: CW+WW
Application Circuit 3: RGB
Application Circuit 4: RGBW
JLS8120
POWER
SUPPLY
POWER
SUPPLY
POWER
SUPPLY
POWER
SUPPLY
INS 2022-03
RE-501-WIFI

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Features
Working Voltage: DC12~24V
Output: common anode
RF Frequency: 2.4GHz
Max load current: 1*6A/DIM; 2*3A/CCT; 3*2A/RGB;
4*1.5A/RGBW
Product size: L48*W26*H13mm
Indicate light
LED
Controller has wireless synchronization function(not only
static mode but also dynamic mode), keep the distance of
same zone devices less than 10m
Direction for use
1. Connect the load wire at rst, followed by the power wire,
please ensure short circuit can not occur between wires
before turning on the power;
2: Setting the type of output as blow, please ensure the
indicate light in correct color according to the loading LED’s
type:
Input port 1
Input port 2
Indicate light color Red Yellow Green Blue
Loading LED’s type Single
color CW+WW RGB RGBW
Red
Yellow
Green
Blue
3: Matching the code with remote.
Before matching the code, receiver can be controlled by any
remote control in any zone (the functions are according to
receiver’s output type which was set in Step 2). Matching code
operation will set the receiver to correct zone and also achieve
unique-control. Please read “About RF code” part for operation
instruction.
www.hoionlighting.com
3/ 5
Indicate light color
Red
Yellow
Blue
Green
Loading LED’s type
Single color
CW+WW
RGB
RGBW
(Indicate light color & output type)
Step 3: Matching the code with remote. Before matching the code, receiver can be controlled by any remote
control in any zone (the functions are according to receiver’s output type which was set in Step 2). Matching
code operation will set the receiver to correct zone and also achieve unique-control. Please read “About RF
code”part for operation instruction.
Wireless-synchronization function
Receivers will transmit the control signals from the remote control and self-inspection the work statues for each
other, so multiple receivers in same zone will wireless-sync-work completely, not only static mode but also
dynamic mode, to achieve wired-like operation experience.
Wireless-synchronization function
Receivers will transmit the control signals from the
remote control and self-inspection of the work statues
for each other. So multiple receivers in the same zone
will wireless-sync-work, not only in static mode but
also in dynamic mode, to achieve a wired-like operation
experience.
RECEIVER 2
RE-401-2.4G
For DIM/CCT/RGB/RGBW
INS 2022-03
RE-401-2.4G

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
JLS2240CCT
+24V
C
W
+24V+24V
--
Connection Diagram
JLS560RGB
JLS8120
JLS560RGBW
Application Circuit 1: Single Color
Application Circuit 2: CW+WW
Application Circuit 3: RGB
Application Circuit 4: RGBW
green
yellow
red
blue
INS 2022-03
RE-401-2.4G

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Technical Parameters
Voltage: 3V (2* AAA battery)
Sleep Current: <25uA
Emission current: <17mA
RF Frequency: 2.4GHz
Remote Control Distance: up to 30m
Size: 60mm*35mm
Net weight: 80g
CLICK
CONTROL FUNCTION
1. DIM (work with single color receiver)
ON/OFF Short-click
Adjusting brightness/speed Rotate
Change Modes Double-short-click
# Mode Marks
1Flash Rotate to adjust
the speed
2Fade
# Mode Marks
1Flash
Rotate the controller
to adjust the speed
2Fade
3WW+CW - ash
4WW+CW - fade
5WW/CW - ash in turn
6WW/CW - fade in turn
2. CCT (work with CW+WW receiver)
ON/OFF Short-click
Adjusting brightness/speed Rotate
Adjusting CCT Press+Rotate
Change Modes Double-short-click
Learning Key
Long-Pressing for 5 sec.
Signal Indicate Key
Light up or ash according
to the working state.
Clearing Key
Long-Pressing for 5 sec.
Matching Key
Long-Pressing for 5 sec.
A
C
B
D
CONTROLLER 1
CON-KNOB-1Zone
For DIM/CCT/RGB/RGBW
# Mode Marks
13 colors - ash
Rotate the controller
to adjust the speed
23 colors - ash
33 colors - fade
47 colors - fade
5White - ash
6White - fade
7Red-blue - fade
8Green-blue - fade
3. RGB (work with RGB receiver)
ON/OFF Short-click
Adjusting brightness/speed Rotate
Adjusting color Press+Rotate
Change Modes Double-short-click 4. RGBW (work with RGB receiver)
ON/OFF Short-click
RGB/W switching 2s long-pressing
Adjusting brightness/speed Rotate
Adjusting color Press+Rotate
Change Modes Double-short-click
Hotkey 3times short-click to turn ON/
OFF of all channels output
# Mode # Mode Marks
13 colors - ash 5White - ash
Rotate the controller
to adjust the speed
23 colors - ash 6White - fade
33 colors - fade 7Red-blue - fade
47 colors - fade 8Green-blue - fade
INS 2022-03
CON-KNOB-1Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Restoring factory settings
of remote control
1. Press and hold “B“ key for 20 sec until the indicator
of remote control process the state as 100%-off-100%.
2. Press “D“ to submit and nish the operation.
The indicator of the remote control will ash three
times after successful operation.
Connecting the load to
the receiver and power
on it.
1. It is necessary to clear
the code if the receiver was
coded before.
2. Batch operation can be
performed within the remote
control range.
3. Please remember to cut
off other un-coded zones’
power, or they will be paired
together.
It will also automatically exit
code transmission status
after 60 sec.
Connecting the load to
the receiver and power
on it.
1. The clearing operation
should be nished within 1
minute after the receiver is
2. Batch operation can be
performed within the remote
control range.
Press and hold “C“ on the
remote control for 5 sec.
The indicator of the remote
control will ash quickly.
Matching coding nishes when
you see the load light ashes
3 times and return to the initial
state.
Press and hold “D“ on the
remote control for 5 sec.
Matching coding nishes when
the load light ashes 3 times
Press any key to exit and
end the operation.
It will also automatically exit
code transmission status
after 60 sec.
Press any key to exit and
end the operation.
It will also automatically exit
code transmission status
after 60 sec.
Code learning operation
between remote controls:
Used to unify system code values or copy a new
remote control. Since each remote control has its own unique
RF code at the time of delivery, when there are multiple remote
controls in one system, one of them must be selected as
a main, and others should copy its RF code.
1. Main remote control: Press and hold “C“ key for 5 sec.
The indicator of the remote control will ash quickly.
That means it enters the pairing mode
2. New remote control: Press and hold “B“ key for 5 sec.
The indicator will turn from 100% to off means it enters
learning code status.
3. The indicator of the new remote control will ash
three times after successful code learning.
Remote control RF code
learning from controllers
1. Turn off the power supply of the controllers.
2. Press and hold “B“ for 5 sec until indicator
of remote control turns off.
3. Turn on the power supply of controllers. The indicator
of the remote control will ash three times after successful
code learning.
Note: The distance from controllers to remote controls
should be less than 2m.
Code Matching
Code Clearing
INS 2022-03
CON-KNOB-1Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Technical Parameters
Voltage: 3V (2* AAA battery)
Sleep Current: <20uA
Emission current: <20mA
RF Frequency: 2.4GHz
Remote Control Distance: up to 30m
Size: L108mm*W36mm*H22MM
Net weight: 30g
CONTROL FUNCTION
1. RGB 2. RGBW/RGB+W
CONTROLLER 2
CON-RGB-1Zone
For RGB/RGBW/RGB2W
Package includes:
1*bracket, 1*3M foam sponge glue,
2*screws, 2*expansion tubes,
Color Ring
Static color options.
64 colors in total.
Color Ring
Static color options.
64 colors in total.
White hot key
Hot key for white color
W ON/OFF
W channel ON/OFF
Colors hot key
Hot key for static colors
W Brightness+/-
W channel brightness; Long
press for fas adjusting
Brightness+
Brightness+
Speed+
Speed+
ON/OFF RGB ON/OFF
MODE
8 dynamic
modes RGB MODE
Brightness- Brightness-
Speed- Speed-
INS 2022-03
CON-RGB-1Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
3. RGBW/RGB+CCT
5. DIM (Single Color)
4. CCT (CW+WW)
Color Ring
Static color options.
64 colors in total.
Color Ring
Static color options.
64 colors in total.
Color Ring
Static color temperature
options. 127 levels in total.
Brightness+ hot key
5 levels (100%, 70%, 30%, 10%, 1%)
CW+WW ON/OFF
CCT channel ON/OFF
Color Temperature-
Short press-5 quick levels;
Long press- stepless adjusting
Brightness- hot key
5 levels (1%, 10%, 30%, 70%, 100%)
CW+WW Brightness+/-
CCT channel: color tempera-
ture+/-; Short press-3 quick
levels; Long press-stepless
adjustment;
Color Temperature+
Short press-5 quick levels;
Long press- stepless adjusting
Brightness+
Brightness+
Brightness+
Speed+
Speed+
Speed+
RGB ON/OFF
ON/OFF
ON/OFF
RGB MODE
MODE
Flash, Fade
MODE
(All ash, ash
in turn, all fade,
fade in turn)
Brightness-
Brightness-
Brightness-
Speed-
Speed-
Speed-
INS 2022-03
CON-RGB-1Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Restoring factory settings
of remote control
1. Press and hold “W“ key for 30 sec until indicator of remote
control process the state as 100%-off-100%.
2. Press “M“ to submit and nish the operation.
The indicator will ash three times after successful operation.
Connecting the load to
the receiver and power
on it.
1. It is necessary to clear
the code if the receiver was
coded before.
2. Batch operation can be
performed within the remote
control range.
3. Please remember to cut
off other un-code zones’
power, or they will be paired
together.
Connecting the load to
the receiver and power
on it.
1. The clearing operation
should be nished within 1
minute after the receiver is
2. Batch operation can be
performed within the remote
control range.
Press and hold “ “ on the
remote control for 5 sec.
The indicator of the remote
control will ash quickly.
Matching coding nishes when
you see the load light ashes 3
times and returns to the initial
state.
Press and hold “M“ on the
remote control for 5 sec.
1. Matching coding nishes
when The load light ashes 3
times
2. If the original remote control
is lost, the new control can be
used for clearing operation.
Press any key to exit and
end the operation.
It will also automatically exit
code transmission status
after 60 sec.
Press any key to exit and
end the operation.
It will also automatically exit
code transmission status
after 60 sec.
Code learning operation
between remote controls:
Used to unify system code values or copy a new
remote control. Since each remote control has its own unique
RF code at the time of delivery, when there are multiple remote
controls in one system, one of them must be selected as
a main, and others should copy its RF code.
1.Main remote control: Press and hold “ “ key for 5 sec.
The indicator of the remote control will ash quickly.
That means it enters the pairing mode
2.New remote control: Press and hold “W“ key for 20 sec.
It enters learning code status when the indicator turns from
100% to off.
3.The indicator of the new remote control will ash
three times after successful code learning.
Remote control RF code
learning from controllers
1.Turn off the power supply of the controllers.
2.Press and hold “W“ for 20 sec until indicator of remote con-
trol turns off.
3.Turn on the power supply of controllers. The indicator of
the remote control ashes three times after successful code
learning.
Note: The distance from controllers to remote controls
should be less than 2m.
Code Matching
Code Clearing
INS 2022-03
CON-RGB-1Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Technical Parameters
Voltage: 3V (2* AAA battery)
RF Frequency: 2.4GHz
Remote Control Distance: up to 30m
Dimension: L140mm*W20mm*H18
Net weight: 46g
Name of Key Description
ON/OFF on/off at any time
DIM/CCT
For single color: 20%, 50%, 100% brightness hot key
For CCT: 1)Short pressing: 100%CW, 50%CW+50%WW, 100%WW
hot key
2)Long pressing: Color temperature increase/reduce stepless in
turn
Brightness+ Short press for fast adjustment, long press for ne adjustment
Brightness-
DIY 1- DIY 2
Short press once to call out the previously stored light state;
DIY lighting operation (take DIY1 key as an example):
1) Short press the DIY1 key three times within 3 seconds to
enter the custom operation;
2)Customize the light setting through the “DIM/CCT/Bright-
ness+/Brightness -” key
3)After the lighting is set, press the DIY1 button once to save, or
press the “ONOFF/DIY2 button” to exit without saving.
Note: The entire DIY setting process needs to be completed within 30S,
it will automatically exit after timeout.
ON/OFF DIY 1
DIY 2
Brightness+
DIM/CCT
Brightness-
Please pay attention to the following 3
points before operation:
1) All equipment in the complete system after
installation should have a unied and unique
code value, so as to achieve the security and
stability of the system.
2) The receiver can only store one code value
and cannot be overwritten. Before learning
the new code value, it is necessary to clear
the original code of the receiver; the remote
controller can only save one code value but
can be overwritten and can also restore the
factory settings. In order to facilitate the later
maintenance, the three components that may
be involved in the system (including receivers,
hand-held remote controllers, and panel re-
mote controllers) can realize mutual learning
of code values.
3) Since the receiver performs code value
learning in the power-on state, in order to
avoid confusion in the area, it is recommend-
ed that each area has an independent power
switch so that the power of other areas can
be easily cut off when the code is being
operated.
Code Pairing
Connecting the load to
the receiver and power
on it.
1.It is necessary to clear the
code rst, if the receiver was
coded before.
2.Batch operation can be
performed within the remote
control range.
Press and hold “DIY 1“ on
the remote control for 5
sec.
Once the indicator of the
remote control ashed quickly,
and the load light ashed 3
times and returned to the ini-
tial state, it enters the pairing
code transmission status.
Press any key to exit and
end the operation.
It will automatically exit code
transmission status after
60 sec.
the receiver will only be controlled by the value code remote controller.
CONTROLLER 3
CON-WH-1Zone
For DIM/CCT
INS 2022-03
CON-WH-1Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
INS 2022-03
CON-WH-1Z
Code Clearing
Connecting the load to the
receiver and power on it.
1. The clearing operation
should be nished within 1
minutes after the receiver is
powered on.
2. Batch operation can be
performed within the remote
control range.
Press and hold “ON/
OFF“ key for 20s until
the indicator of remote
control process the state
as 100%-off-100%.
Press and hold “DIY 2“ on the
remote control for 5 sec.
1. Once the indicator of the
remote control ashed quickly,
and the load light ashed 3 times
and returned to the initial state,
it enters the clearing code trans-
mission status.
2. If the original remote control is
lost, the new remote control can
be used for clearing operation.
Press “DIY 2“ to submit
and nish the operation.
The indicator of the remote
control will ash 3 times after
successful operation
Press any key to exit
and end the operation.
It will automatically exit code
transmission status after 60 sec.
The original code value of the receiver needs to be cleared before learning a new code.
Restoring factory settings of remote control
Used to unify system code values or copy a new
remote controls. Each remote controller has its own unique
code at the time of delivery. When there are multiple remote
controllers in a system, one of them must be selected as
a main. The others should copy its RF code.
Code learning operation
between remote controls:
Turn off the power sup-
ply of the controllers.
Press and hold “ON/OFF“
for 5 sec until indicator of
remote control turns off
Once the indicator of the
remote control ashed quickly,
and the load light ashed 3
times and returned to the ini-
tial state, it enters the pairing
code transmission status.
Turn on the power supply of
the controllers. Its indicator
will ash 3 times after suc-
cessful code leaning
It will automatically exit code
transmission status after 60 sec.
1. Main Remote Control: Press and hold “DIY 1“ for 5 sec. Remote
control enters the pairing code transmission status when its indicator
ashes quickly.
2. New remote control: Press and hold “ON/OFF“ for 5 sec. The re-
mote control enters learning status when its indicator turn from 100%
to off.
3. The indicator of the new remote control will ash 3 times after
successful code learning.
Remote Control RF code
learning from controllers

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Restoring factory settings
of remote control0
1. Press and hold “B“ key for 20 sec until the indicator of re-
mote control process the state as 100%-off-100%.
2. Press “D“ to submit and nish the operation.
The indicator of the remote control will ash three times after
successful operation.
Linking & Unlink
Linking
Unlinking
Connecting the load to
the receiver and power
on it.
1. It is necessary to clear
the code if the receiver was
coded before.
2. Batch operation can be
performed within the remote
control range.
3. Please remember to cut
off other un-code zones’
power, or they will be paired
together.
It will also automatically exit
code transmission status
after 60 sec.
Connecting the load to
the receiver and power
on it.
1. The clearing operation
should be nished within 1
minute after the receiver is
2. Batch operation can be
performed within the remote
control range.
Press and hold “C“ on the
remote control for 5 sec.
The indicator of the remote
control will ash quickly.
Matching coding nishes when
you see the load light ashes
3 times and return to the initial
state.
Press and hold “D“ on the
remote control for 5 sec.
Matching coding nishes when
The load light ashes 3 times
Press any key to exit and
end the operation.
It will also automatically exit
code transmission status
after 60 sec.
Press any key to exit and
end the operation.
It will also automatically exit
code transmission status
after 60 sec.
Code learning operation
between remote controls:
Used to unify system code values or copy a new remote con-
trol. Since each remote control has its own unique RF code at
the time of delivery, when there are multiple remote controls
in one system, one of them must be selected as a main, and
others should copy its RF code.
1. Main remote control: Press and hold “C“ key for 5 sec.
The indicator of the remote control will ash quickly.
That means it enters the pairing mode
2. New remote control: Press and hold “B“ key for 5 sec.
The indicator will turn from 100% to off means it enters
learning code status.
3. The indicator of the new remote control will ash
three times after successful code learning.
Remote control RF code
learning from controllers
1.Turn off the power supply of the controllers.
2.Press and hold “B“ for 5 sec until the indicator of remote
control turns off.
3.Turn on the power supply of controllers. The indicator of the
remote control will ash three times after successful code
learning.
Note: The distance from controllers to remote controls
should be less than 2m.
INS 2022-03
CON-WH-1Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Technical Parameters
Voltage: 3V (2* AAA battery)
RF Frequency: 2.4GHz
Remote Control Distance: up to 20m
Size: L150*W40*H20mm
Net weight: 95g
CONTROL FUNCTION
1. Single color 2. CCT (CW+WW)
CONTROLLER 4
CON-MULTI-4Zones
For DIM/CCT/RGB/RGBW/RGB2W
B+B-
S+S-
M
w
Zone
*
SET
B+B-
S+S-
M
w
Zone
*
SET
Installation of remote control’s bracket:
1. Accessories include: bracket 1pc, 3M foam sponge glue 1pc,
screw 2pcs, expansion tube 2pc.
2. There are 2 options for bracket installation:
1) Using screw and expansion tube for drilling
installation (suitable for uneven and ash surfaces);
2) Using 3M foam sponge glue for free drilling
installation (suitable for at and no ash surface).
ON ONOFF OFF
Dimming ring CCT ring
Brightness-
5 levels(10%, 30%,
50%, 70%, 100%)
Brightness-
5 levels(10%, 30%,
50%, 70%, 100%)
Brightness+
5 levels(10%, 30%,
50%, 70%, 100%)
Brightness+
5 levels(10%, 30%,
50%, 70%, 100%)
Brightness+
(1024 levels. long press
for fast adjusting)
Brightness+
(1024 levels. long press
for fast adjusting)
Speed+
(Speed down for dy-
namic mode.100 levels.
long press for fast
adjusting)
Speed+
(Speed down for dy-
namic mode.100 levels.
long press for fast
adjusting)
Zone indicator Zone indicator
Zone Selector
long press 2s
to ALL control
Zone Selector
long press 2s
to ALL control
Brightness-
(1024 levels. long press
for fast adjusting)
Brightness-
(1024 levels. long press
for fast adjusting)
Speed-
(Speed down for dynamic
mode.100 levels. long press
for fast adjusting)
Speed-
(Speed down for dynamic
mode.100 levels. long press
for fast adjusting)
Set Key Set KeyRF signal indicator RF signal indicator
Mode Mode
INS 2022-03
CON-MULTI-4Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
3. RGB
5. RGB+CCT
4. RGBW
B+B-
S+S-
M
w
Zone
*
SET
B+B-
S+S-
M
w
Zone
*
SET
B+B-
S+S-
M
w
Zone
*
SET
ON
RGB-ON
RGB-ONOFF
RGB-OFF
RGB-OFF
Color ring
White hot key
CW-ON/OFF
W- ON/OFF
Color ring
Color ring
6 colors hot key-
(6 static color: cyan - purple
- yellow - blue - green - red)
CW/CCT-
Balance to warm white.
Long-press can get fast
adjusting
W-Brightness-
6 colors hot key+
(6 static colors: red - green -
blue - yellow - purple - cyan)
CW/CCT+
Balance to cool white. Long
press can get fast adjusting
W-Brightness+
Brightness+
(1024 levels. long press
for fast adjusting)
RGB/CCT-Brightness+
(for RGB/CCT static colors. long
press for fast adjusting)
Brightness+
(1024 levels. long press
for fast adjusting)
Speed+
(Speed down for dy-
namic mode.100 levels.
long press for fast
adjusting)
Speed+
(Speed down for dy-
namic mode.100 levels.
long press for fast
adjusting)
Speed+
(Speed down for dy-
namic mode.100 levels.
long press for fast
adjusting)
Zone indicator
Zone indicator
Zone indicator
Zone Selector
long press 2s
to ALL control
Zone Selector
long press 2s
to ALL control
Zone Selector
long press 2s
to ALL control
Brightness-
(1024 levels. long press
for fast adjusting)
RGB/CCT-Brightness-
(for RGB/CCT static colors. long
press for fast adjusting)
Brightness-
(1024 levels. long press
for fast adjusting)
Speed-
(Speed down for dynamic
mode.100 levels. long press
for fast adjusting)
Speed-
(Speed down for dynamic
mode.100 levels. long press
for fast adjusting)
Speed-
(Speed down for dynamic
mode.100 levels. long press
for fast adjusting)
Set Key
Set Key
Set KeyRF signal indicator
RF signal indicator
RF signal indicator
Mode
Mode(8 dynamic modes)
Mode
# Mode Marks
1White breathe
adjustable speed
brightness is
unadjustable
23 colors jumpy
37 colors jumpy
43 colors fade
57 colors fade
6R/G cross fade
7R/B cross fade
8G/B cross fade
About “all-control”
This system is available to achieve mixed control, like zone 1-single
color, zone 2-CCT, zone 3- RGB, zone 4- RGBW.
The all buttons’ functions are active in all-control mode, the effect
for each zone will according to the output type setting of each
receiver( 4 in 1 controller); RGB+CCT type has a special controller
item for it, no need to set.
INS 2022-03
CON-MULTI-4Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Connecting the load to
the receiver and power
on it.
1. It is necessary to clear
the code if the receiver was
coded before.
2. Batch operation can be
performed within the remote
control range.
Connecting the load to
the receiver and power
on it.
1. The clearing operation
should be nished within 1
minute after the receiver is
powered on
2. Batch operation can be
performed within the remote
control range.
Remote control A: Press
and hold “ON” on the
remote control for 5 sec
1. It enters the pairing code
transmission when the load
light ashes quickly.
2.It will also automatically
exit code transmission status
after 60 sec. or pressing any
key to exit.
Select Area
Select the area with the “Zone”
key and the corresponding indi-
cator lights up
Press and hold the remote
control “Off” for 5 sec.
There is no need to select
the corresponding area
when clearing code.
1.It enters the clearing code
transmission when the load
light ashes quickly.
2.It will also automatically exit
code transmission status after
60 sec. or pressing any key
to exit.
Remote control B: long
press “mode key” for 5 sec
1.It enters the code receiving
status when the indicator light
changes from 100% to off.
2.It will also automatically exit
code receiving status after 30
sec. or exit after learning the
code value successfully.
Press and hold “ON” on
the remote control for 5
sec
1.It enters the clearing code
transmission when the load
light ashes quickly.
2.It will also automatically
exit code transmission status
after 60 sec. or pressing any
key to exit.
See the load light ashes
3 times and return to the
initial state
Pairing coding nishes
successfully
See the load light ashes
3 times and return to the
initial state
Clearing coding nishes
successfully
See the remote control
B indicator light ash 3
times
Code copying nishes and
the controller exits code
value receiving status.
Code Matching
Code Clearing
Code Learning
4
Used to unify system code values or copy a new remote control. Since each
remote control has its own unique code at the time of delivery, when there are
multiple remote controls in one system, one of them (for example, remote control
A) must be selected as the system code value, and the code value
of the rest remote controls (for example, remote control
B) should be copied to the same one.
INS 2022-03
CON-MULTI-4Z

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
Cut off the power of re-
ceiver which is controlled
by the controller
Long press “mode “ for
20 seconds
The remote indicator light
dims down and ashes
continuously until the 20th
second and then back to
100% light. Means this step
is nished.
Long press “mode key” for
5 sec
It will also automatically exit
code receiving status after 30
sec. or exit after learning the
code value successfully.
Press the “OFF” to conrm,
the remote indicator light
ashes 3 times
Restore factory settings
successfully.
Power on the receiver.
Code copying nishes when
remote control indicator light
ashes 3 times.
The controller exits code
value receiving status.
Code Copying
Restore the
Factory Setting
A new remote control can also copy code from any one of the receivers in the whole
system, after the successful operation, the new remote control can replace the original
remote (if it is lost).
The remote control will be restored to the factory’s unique code value.
* For security of the system, the distance from remote control to the one receiver should be less than 2 meters in this operation.
*Only one time operation is requested for the whole system, no need different operation for different zones.
INS 2022-03
CON-MULTI-4Z