JOYROOM Fit-Life Series User manual

User Manual
Fit-Life Series Smart Watch
1. To assemble/disassemble the watch
band, please refer to the figure below:
2. To wear the watch properly, please refer
to the figure below:
Note:
When wearing the watch, please keep it in
comfortable contact with wrist skin (in proper
tightness). Do not wear it on the wrist joint.
Assembling/disassembling

1. Charging the watch: Align the magnetic
charging dock with the metal contact of
the watch, connect the other end to the
charger and connect power until the
screen displays charging capacity.
Charging & turning on
1. Scan the QR code below or the QR code
on the watch with your mobile phone to
download the SMART-TIME PRO APP,
register an account and log in.
Note: The phone system is required to be
Android 6.0 or iOS 11.0 or above.
2. Open the APP,
select Home “Device
→Bind device→select
“JR-FT5”→click
Connect→click √ on
your watch”.
Downloading APP and
pairing the watch
Note:
When the watch indicates low battery, please
charge it in time. It is recommended to use a
charger with a rated output of 5V/1A or a
computer USB port together with the included
cable to charge it.
2. Turning on
the watch:
press and hold
the power
button for 3s.
3s
Bind device
2
MeDeviceState
Bind device
Searching
3
Home
Me
1
DeviceState

When connecting for the first time,
Android users need to click "To bind" in
the "Call service pairing option" in the BT
pairing prompt interface, and then
complete BT 5.0+3.0 pairing according to
the operation prompts.
(1) iOS system
(2) Android system
Bind device
Search complete
4
JR-FT5
Bind device
BT pairing request
Cancel Pair
5
Pair 07:00
Call service pairing
Your watch supports the call service (3.0)
After the call service is bound to the
phone, you can make and receive calls on
the watch
Select your device to connect in your
phone’s "Settings”>"BT"
To bind
BT pairing request
Cancel Pair

3. After binding successfully, you can start
to use all the functions of the watch, and
the data generated by it can also be saved
to the APP synchronously.
4. If you need to unbind the watch, please
open the APP, and select “Device→
Unbind”
Notes:
➀ Please keep the phone’s BT function on
during use, otherwise the messages on
the phone cannot be synchronized to the
watch;
➁ Select "Device→Message reminder→
Enable related APP permissions" on the
APP, then relevant messages will be
synchronized to the watch, such as call
reminders and message reminders.