JRC JFP-185BB User manual

1
7ZPNA4637
JFP-185BB SEARCHLIGHT SONAR
Quick Reference
Power ON/OFF
Power ON
The start-up screen is displayed.
Push
Long press
• When the menu of [Hull unit operation at the start] is set in [Yes], the Transducer unit automatically will go down
after initial screen is displayed.
Keep pressed until [Preparing for the end] will be displayed.
• When the menu of [Hull unit operation at the start] is set in [No], push the key, the Transducer unit will go
down after initial screen is displayed.
Caution: It takes some time to handle the start of the program or the end at the time of power supply ON or OFF.
Change of Range setting
Zoom
Change the
numeric value of
range.
Confirm the numeric
value of range.
Return to
the mode
display.
The list of RANGE will be displayed on the screen.
Knob 2Knob 1
Operation panel
Display example
(1)
(2)
(4)
(3)
(16)
(18)
(17)
RANGE
Scan direction
Scan sector
TILT
GAIN
TVG
VRM
Own ship's
position
Ship's speed
Ship's bearing
Step angle
Bearing center
Frequency and
Directivity angle
Horizontal/Slant distance
of current range
CM status
Transducer position
and Water temp.
26.6
℃
(12)
(11)
(5)
(9)
(13)
(15)
(14)
Rainbow pattern
(Color palette)
Date/Time
(8)
(1)
(2)
(4)
(3)
(5)
(6)
(7)
(9)
(10)
(7)
(14)
(8)
(16)
(13)
(11)
(10)
(18)
(12)
(17)
(15)
(6)
(8)
(7)
Knob 1
(Left)
Knob 2
(Right)
1 2
Power OFF
Long press Push Push
or
Turn Push Push Push
1
or 1
1
Menu
Confirm of the setting item.
or
Confirm of the menu item.
or
Select the menu item.
*The display will be switched over in the order of [Menu1], [Menu2], [Menu3] or menu not display.
Turn PushPushPush PushTurnPush
*Select the menu. Select the setting item.
1 1 11
(10)
Range1 10m
Range2 20m
Range3 60m
Range4 120m
Range5 200m
Range6 280m
Range7 340m
Range8 450m
Range1 10m
Range2 20m
Range3 60m
Range4 120m
Range5 200m
Range6 280m
Range7 340m
Range8 450m

2 7ZPNA4637
Knob 2Knob 1
Knob 1
(Left)
Knob 2
(Right)
1
2
Adjustment of Gain
Push
The red color box
will move to [GAIN]
of information screen.
Turn
Change the gain.
1
Switch of Range
Push
The red color box
will move to [RANGE]
of information screen.
Turn
Change the range.
1
This menu can be also changed by [Menu 1].
Change of the scan direction
Push
The red color box will
move to [Scan direction]
information screen.
Turn
Change the angle of
sector.
1
Select / Confirm of the presentation modes
Select one of the display menu, [Sonar],
[Sonar (Off-center)], [Bottom-scan] or
[Echo sounder].
Push
Select the display
menu.
Turn
Put red color box on
the screen menu to
display.
1
Change of TVG setting
Push
The red color box
will move to [TVG]
of information screen.
Turn
Change the TVG.
1
Change of the tilt angle
Push
The red color box
will move to [TILT]
of information screen.
Turn
Change the angle of tilt.
1
Change of the scan sector
Push
The red color box will
move to [Scan sector] of
information screen.
Turn
Change the angle of
sector.
1
Recall of CM setting
You can recall the settings by selecting CM1 to CM6.
Each CM key recalls the preferred values saved for different fish type, seasons and fishing points.
Push *[Language], [Range & speed unit], [Temprature unit] and etc. are used in commonly.
～
Switch of frequency
Push
Display the frequency.
Turn
Change the frequency.
Push
Confirm the frequncy.
or
Push
Note: Set frequency is shown at the upper left.
This menu can be also changed by [Menu 1].
2
2
Other functions
can be assigned
to F2.
(Initial setting：
Frequency)
Operation of VRM
Push Turn
Go VRM up and down.
2