JST CN-SAP1190 User manual

855
CN CONNECTOR
Disconnectable Crimp style Wire-to-wire connectors
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC max. (AWG #25)
• Voltage rating: 250V AC, DC max.
• Temperature range: -30˚C to +105˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/30m Ωmax.
After environmental testing/60m Ωmax.
• Insulation resistance: 100M Ωmin.
• Withstanding voltage: 1,000V AC/minute
• Applicable wire:
Inner conductor cross sectional area /0.05 to 0.2mm2
Outer conductor O.D. /0.85 to 2.2mm (.033" to .087")
Sheath O.D. /1.45 to 3.3mm (.057" to .130")
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Connector for the GPS antenna system of
the car navigation system. The CN
connector applies the unique crimping
method to the shielding meshed wires,
which will result in superior high-
frequency characteristics.
Features––––––––––––––––––––––––
• Cost effective
Less expensive than the conventional high-frequency
connectors.
• Crimping method and shape
Shielding meshed wires are crimped with the N-type crimp
shape, which prevents the deflection and coming off of the
meshed wires.
• Superb high-frequency characteristics
This connector can keep low VSWR characteristics, while
serving high-frequency characteristics.

856
CN CONNECTOR
Part name Model No. Q'ty / reel Material and Finish
CN-SAP1190
CN-SAS1290
SCF-61T-4.6
SCM-61T-4.6
Pin contact
Socket contact
Receptacle contact
Plug contact
3,000
3,000
1,200
1,500
Conductor
Shielding part Brass, tin-plated
Brass, tin-plated
Phosphor bronze, tin-plated
Part name Model No. Q'ty / box Material
CNR-01V
CNP-01V
Glass-filled PBT, UL94V-0
1,000
1,000
Receptacle housing
(for Pin contact)
Plug housing
(for Socket contact)
8.0(
.315
)
11.8(.465)
25.8(1.016)
18.8(.740)
15.0(.591)
30.0(1.181)
3.3(.130)dia.
0.9(.035)
9.5(.374)
7.6(. 299 )
5.6
(
.220 )
6.6 (.260)
9.5(.374)
10.7(.421)
25.0(.984)
Receptacle housing
(for Pin contact) Plug housing
(for Socket contact)
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Contact––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
4.1(.161)
4.8(.189)4.9(.193)
14.4(.567)
3.6(.142)3.7(.146)
8.0(.315)
12.5(.492)
11.5(.453)
20.0(.787)
12.0(.472)
2.6
(.102)
2.1
(.083)
1.3
(.051)
3.9(.154)
2.6
(.102)
2.1
(.083)
1.3
(.051)
22.6(.890)
10.7(.421)
Pin contact
Receptacle contact
<Shielding part>
<Conductor> Socket contact
Plug contact

CN CONNECTOR
857
8.8(.346)
15.4(.606)
10.7(.421)
Shielding cover –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Crimp press and crimp applicator –––––– Crimp tool (Pneumatic press) –––––––––
Note: Contact JST for details. Note: Contact JST for details.
CN-SAP1190
CN-SAS1290
Contact Crimp press with safety cover
without safety cover
AP-K2N
Applicator with dies Contact Crimp tool Control unit
APLMK CN-SAP/S1 APLNC CN-SAP/S1
MP-CN-BCF61
MP-CN-BCM61
MP-CN-SCF61
MP-CN-SCM61
–
–
MP-CU-CN (S)
MP-CU-CN (S)
BCF-61T-4.6 (loose piece)
BCM-61T-4.6 (loose piece)
SCF-61T-4.6 (chain)
SCM-61T-4.6 (chain)
8.8(.346) 7.0(.276)
7.0(.276)15.4(.606)
3.3(.130)dia.
Model No. Q'ty / box Material and Finish
CN-SC-11 Phosphor bronze, tin-plated400
Shielding partConductor
Assembly layout –––––––––––––––––––––––––––––––––––––––––––––––––––––––––