JTS TG-10CH36 User manual

WIRELESS TOUR GUIDE SYSTEM
TG-10CH36
TG-10CH18
Specication
TG-10CH36
Number of charging slot : 36 (receiver or transmitter)
Power requirement : Input : 100V ~ 240V,1.2A max AC
Switching power supply
Output : DC 15V, 6A
LED Indicator : Charging Status
Charging time : 8 Hours
Dimensions(mm) : 561mm(W)*399.77mm(D)*230mm(H)
TG-10CH18
Number of charging slot : 18 (receiver or transmitter)
Power requirement : Input : 100V ~ 240V,1.2A max AC
Switching power supply
Output : DC 15V, 3A
LED Indicator : Charging Status
Charging time : 8 Hours
Dimensions(mm) : 361.4mm(W)*422mm(D)*189mm(H)
Important Caution
 Always make all connections before plugging the unit
into an AC power outlet.
 Do not leave the devices in a place with high
temperature or high humidity.
 Always do not handle the power cord with wet hands !
 Keep the devices away from re and heat sources.
 Please fully charge the battery over 8 hours before
operation, and recharge if no use for over three rst
months.
 Do not close the cover during charging to avoid
overheating.
Feature
 TG-10CH36/TG-10CH18, the 36-slot charger/18-slot
charger, is designed to charge multi-units (TG-10T or
TG-10R) simultaneously.
 Light-weight and cabin baggage size design provide
great convenience during trips.
 The charger is designed with 3 kinds of protection
circuit: over-charging, over-discharging, and short
circuit. It takes approximately 8 hours to fully charge
batteries.
59516-001-05
PROFESSIONAL CO., LTD.
No. 148, 9th Industry Road, Ta-Li Industrial Park,
Taichung City, Taiwan, R.O.C.
Tel: [phone] Fax: [phone]
E-mail: [email protected]
www.jts.com.tw

Parts Identication
TG-10CH36/TG-10CH18
1. Power Switch and Indicator
2. DC input
3. Adaptor
4. Charger Slot
5. Charging Indicator
Installation and Operation
A. Connect AC output to outlet and DC output plug
into “DC input”. As soon as AC power is connected,
and "Power Switch" is turned on, the "Charging
Indicator" will ash.
Attention
 The “Charging Indicator” may turn ashing for
self-testing during charging to protect batteries
from being damaged.
 To avoid overheating, don’t close the cover during
charging.
 To avoid being damaged, don’t drop the charging
case.
1
2
1
2
3
5
4
B. Plug the TG-10T/TG-10R into“Charger Slot” of
TG-10CH36/TG-10CH18. The “Charging Indicator”
will ash for seconds at beginning for initial testing,
and then shows green light when charging. It will
turn o when the battery is fully charged.
7
S
A
0
0
2
7
S
A
0
0
2
3
7
S
A
0
0
2
7
S
A
0
0
7
S
A
0
0
2
7
S
A
0
0
2