JTS IE-5 User manual

Monitoring EarphoneMonitoring Earphone
Hi-dynamics, Hi-definition, Low-noise
Accurate audio reproduction earphone
The excellent IE-5 with Full-range Frequency
Precise Driver is specially designed for
wireless in ear monitoring system. Lightweight
and Ergonomic design, the IE-5 is also a perfect
choice for other audio sources and portable
devices.

Hear The Future......Now!

1
Full-range Frequency Precise Driver
(1) Full-range Frequency Precise Driver
(2) Audio Filters: acoustically-engineered lter shapes the frequency
response.
Full-range Frequency
Precise Driver
Audio Filters

2
IE-5 comes with a set of sleeves. Before installing, make sure the sleeves you
use are easy to insert and remove from your ear, and are comfort to wear.
A. CHOOSING AN EARPHONE SLEEVE
Soft Flex Sleeves
In small, medium, and large sizes.
Make sure the earphone sleeves are completely
installed in the earphone stem. If any part of
nozzle is exposed, the sleeves are not installed
properly.
PREPARING PROCEDURE

3
Put the audio cable over the ear.
B. WEARING THE EARPHONES
PREPARING PROCEDURE
Over the ear in
front
Over the ear in
back

4
PREPARING PROCEDURE
C. INSERTING THE EARPHONES
Insert the earphone into the ear canal with the cable facing up, and slightly
twist it backward, feeling the sleeves sealing the ear canal.
Left Right

5
CLEARING ROD GUARD
Remove the sleeves from the earphone before cleaning the wax. Smoothly
insert the wax removal loop into the nozzle, and peel off the wax inside. Be
careful not to damage the internal earphone sound lter when cleaning.
wax removal loop

6
Noise included hearing loss (NHIL) is a function of three factors: Exposure Time, Average
noise level and Peak level of very loud sounds, and is measured under the assumption
of no exposure to levels over 85 dB the rest of the day. The following guidelines are
established by OSHA (Occupational Safety and Health Administration) and more
conservative EE (Equal Energy) approach.
No two individuals have exactly the same hearing sensitivity, and any measure is
based on “Average” person. Some people may be more susceptible to hearing loss. We
strongly recommend that using as low a volume as possible.
IE-5 can signicantly reduce ambient sound level around 25 dB when worn properly.
As a result, it can reduce the sound level to 85 dB from a normal stage volume, 110 dB.
If the earphone is pushed to replicate stage volume, the benets of IE-5 on protecting
hearing loss would be limited. We want you enjoying the music lifetime!
Db SPL
OSHA
EE
85
8hr
88
4hr
94
1hr
90
8hr
95
4hr
97
3hr
30min
105
1hr
15min
110
30min
115
15min
120
7.5min
100
2hr
HEARING HEALTHCARE
Listening to audio at excess sound level can cause permanent
hearing damage. We strongly recommend that using as low a
volume as possible.

7
Do not use when a failure to hear the ambient noise could be hazardous,
such as while operating vehicles or heavy machine, while bicycling, jogging,
or walking near trac.
Prior to inserting the earphone, always recheck whether the sleeves are firmly
attached on the nozzle. When inserting or removing the earphone, please twist it
in or out slowly. Never pull on the earphone cord.
If a sleeve becomes lodged inside your ear, seek professional medical assistance to
remove it.
While using the earphone, make sure the volume level is proper, and would not
damage your ears. Ringing or humming in the ear may be the symptom of excess
sound level, please try to low the volume.
When connecting the earphone in the airplane, use as low a volume as possible so
that the voice from the pilot would not cause discomfort.
Checked by an audiologist on a regular basis and in any other situations that make
you discomfort in wearing the earphone.
SAFE USE

8
CARE AND MAINTENANCE
Avoid dropping or strong impact on the earphone.
Always store IE-5 in the provided case and keep it from water or dusty
environment.
Do not exposure the earphones and sleeves to temperature extremes, such as a
closed vehicle in the sun.
Do not leave the cord under any situation that it may be tripped over or pulled out
accidentally.
Change the sleeves regularly. The sleeves are designed to be used more than once,
but should be replaced when they become solid or start to lose their elasticity.
Never use any other tool to probe the nozzle except wax removal loop that
is included. While wipe the earphone or sleeves, use mild antiseptic to avoid
infection, do not use alcohol disinfectants.

9
TECHNICAL SPECIFICATIONS
Driver: Single balanced armature
Frequency response: 20~13,000HZ
Impedance: 13Ω
Sensitivity (at 1000 kHz): 115 dB/mW
Distortion: Less than 0.3%
Cord length: 148cm
Net weight: 5 grams (excluding cable)
Output connector: Ø3.5 stereo plug
Standard: Carrying Case

59517
warrants that this product will be free from defects in materials
and workmanship for one year. Please contact your local dealer if
the product counters any problem. Make sure to return the proof of
purchase date with any warranty claim.
No.148, Gongye 9th Rd., Dali Dist., Taichung City
41280, Taiwan (R.O.C.)
TEL:886-4-24938803 FAX:886-4-24914890
E-mail:[email protected]
Table of contents
Other JTS Headphones manuals