Pioneer B29 User manual

B29

FCC ID: 2AD29B29

USER GUIDE

WELCOME

Thank you for purchasing !

This Bluetooth Earphone is a unique wireless headphone combining Bluetooth, Lithium Polymer Battery technologies. It is designed to provide you with wireless

high quality sound for your Bluetooth audio devices.

HIGH-FIDELITY SOUND & BLUETOOTH 4.1 TECHNOLOGY

The Earphone boasts state-of-the-art Bluetooth® 4.1 APTX® audio enhancement technology, specifically designed for optimal wireless transmission and

enhanced audio signals. This advanced technology, combined with premium audio components, delivers gratifying, high-quality audio. Optimized to consume

less power wirelessly without comprising performance, this version of Bluetooth is both practical and accessible.

TABLE OF CONTENTS

HOWTO WEAR YOUR DEVICE 5

PACKAGE 7

FUNCTIONS 8

CHARGING 9

PAIRING 10

OPERATION INSTRUCTION 11

SPECIFICATION 13

TROUBLESHOOTING 14

SAFETY INFORMATION----------- 15

HOW TO WEAR YOUR DEVICE

EAR TIPS

We have included 3 sets of ear tips. Depending on the size and shape of your ear canal, use the one that fits you best.

To replace the ear tips, simply remove them to replace.

CORD MANAGEMENT CLIP

The earbuds have a cord management clip installed to secure the slack for a customized fit Place the cord with the clip as shown below.

PACKAGE

1 Earbuds

2 USB charging cable

3 Ear tips

FUNCTIONS

1 Ear stabilizer

2 Ear tips

3 Charging port

4 LED indicator

5 Microphone

6. Volume down/ Previous

7. Power(Paring)/Play/Pause/Answer calls

8. Volume up/Next

CHARGING

Before using, please charge it using the micro USB charging cable included in the package.

Note Most USB chargers are compatible with it. For optimal AC charging, please use a 1.0A USB charger.

Gently lift the USB charging port cover , plug the small micro USB into the charging port on the right side of the earbuds and the other end of the cable (the

standard USB 2.0 plug) into any standard USB port (such as a computer or USB charger).

The LED light on the right side of the earbuds will turn on when it is being charged. When it is fully charged, the LED indicator light will turn off.

PAIRING

1 Press and hold the power button on the wire of earbuds for 5 seconds to put the earbuds into pairing mode. You will hear the voice prompt "Pairing" and the LED

light on the remote will flash blue/red.

Note. Pairing mode will be active for about 2 mins, if you didn't pair the device within this period of time, turn off the earbud by holding the power button down

for 3 seconds and restart the step one.

2 Enable your Bluetooth device such as cell phones, tablets or other Bluetooth media and make sure it is in searching mode.

3 Select "Oricom" in the list shown on the Bluetooth device.

4 Once selected, you will hear a voice prompt "Connection successful. The Earphone could connect to multiple Bluetooth devices at the same time.

IMPORTANT When you need to connect your headphone with another Bluetooth enabled audio device, hold the pairing button until the Bluetooth LED indicator

flashes quickly. This will put the headphone into pairing mode.