Julian Bowen Limited CAM501 User manual

Tools Required
1:30hrs
Approximate Assembly Time
Before you start....
Please carefully unpack and lay out all of the component parts to ensure nothing
is missing and to check each component for any obvious damage.
Should you identify any concerns at this stage please contact the retailer from
whom this product was purchased. Please quote your order number, details of
your issue, the product code, and the batch number from the cartons which will
help to resolve your issue as quickly as possible.
Version Number - 1.0 Product Code - CAM501 / CAM601 / CAM605
People Required to Assemble
ASSEMBLY
INSTRUCTIONS
Bunk Bed 90cm
1500mm
1016mm
2014mm

Contact Retailer

Please check all hardware matches the list below. Should
you notice any are missing please contact your retailer.
We strongly advise that you do not use Power Tools, such as
drills or electric screwdrivers, during the assembly as this
may cause irreparable damage and will invalidate your
warranty.
J
1/4 x 110 Bolt x8 7 x 100 Bolt x41 7 x 50 Bolt x7
68mm Spacer x2 Caps Ø17mm x54
4 x 35 Screw x67Allen key x1 Nut 1/4 x8
AB C
HI
FG
Wooden dowel x46
10 x 40mm
D
Wooden dowel x4
15 x 100mm
E

PARTS
Please ensure you carefully check all the pieces, should you have any
concerns please contact the retailer before assembly commences.
Pelase have your order number, details of the issue, the product code,
and the batch number from the cartons as this will help us to resolve
your issue much faster.
18
16
16
16
16
17
17
20

ASSEMBLY ADVISE
Please take the time to carefully read through these instructions
before you commence.
Keep these instructions for furure reference.
We advise that the product is assembled in the room it is intended for.
We advise that you keep the hardware in a bowl during assembly to
avoid losing anything.
We strongly recommend that you keep childrem away from the work
area.
Small component parts could choke a child if swallowed.
We recommend you use a sheet a blanket to protect both floor and
product through the assembly stages.
This product is heavy, and we recommend a 2 person lift to avoid
personal injury or damage to the product.
Never push or pull the product as this could cause both personal injury
or irreparable damage to product or floor.
We have tried to make this piece of furniture easy to assemble if the
instructions are followed carefully.
In the unlikely event that you have problems with assembling the
product or have missing or damaged parts, please contact your
retailer and we assist them in rectifying the problem as quickly as
possible.
PLEASE
Remember we strongly urge you DO NOT use power tools such as drill
or eletric screwdrivers as this could cause irreparable damage to
your product and will invalidate your warranty

Recommended Mattress Size: 90cm x 190cm (UK Single) with Maximum Depth of 22,0cm.
These labels are not to be removed
CAMDEN BUNK BED
Product Code: CAM501 / CAM601 / CAM605
This Label Is Not To Be Removed
mould
It is necessary to frequently

46x
F+B
F+B
F+B
F+B
F+B
F+B
F+B
F+B
F+B
F+B
F+B
F+BF+B
F+B
F+B
F+B
B
B
F+B
F+B
F+B
20

F+A
F+B
F+B
F+B
F+B
F+B
F+B
F+B
F+B
F+A
F+A
F+A
F+B
F+B
F+B
F+B
H
H
H
H
H
H
H
H
4x
B
B
B
A
HF
4x
A
B
HF

84.6cm
17
17
16
16
16
I
II
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I

84.6cm
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
17
17
16
16
16