Julian Bowen Limited Sorrento User manual

Julian Bowen Limited
Sorrento Storage Bed
135cm
Assembly Instructions
VERSION : 160111 01

03
HARDWARE
02
03
08
13
10
04
03
06
04
01
15
PARTS
05
07
09
11
12
09
09 16
A
M8 x 20mm (4 PCS)
C
M8 x 30mm (14 PCS)
D
M8 x 40mm (4 PCS)
E
M8 x 65mm (8 PCS)
F
M4 x 20mm (4 PCS)
G
M4 x 30mm (2 PCS)
I
H
HANDLE (1 PC) FLAT WASHER (39 PCS)
J
SPRING WASHER
(6 PCS)
K
HEX NUT (2 PCS)
L
B
FLANGE NUT (8 PCS)
M5 ALLEN KEY (1 PC)
M
M8 x 30mm
+ FLAT WASHER
(8 PCS)
Already inserted into
Head & Foot Ends
I
MN
SPANNER (1 PC)
14

04
Safety Advice
Please take the time to carefully read through the
whole of these instructions before you commence.
Keep these instructions for future reference.
Unpack, inspect and check off all of the contents.
Please dispose of all packaging safely.
Small component parts could choke a child if swallowed.
We strongly recommend that you keep children well away
from the work area.
It would be sensible to lay a sheet or blanket on the floor
where you intend to work to avoid scratching this product
and to protect your floor.
This product is heavy. Take extreme care when lifting to
avoid personal injury or damage to the product.
Assemble the product as close to its intended final position
in the room as possible.
Maximum Mattress Weight for Correct Operation -
45kg (135cm x 190cm)
HANDY HINT: If you keep the hardware in a bowl during
assembly you will be less likely to lose them.

05
03
15
15
02
L
DI
X 4
1
X 8
L
13
I
C
Do not fully tighten the bolts as the
brackets may need to be adjusted
once the mattress frame is attached.
2

06
X 4
X 8
02
X 2
F
06
04
04
06 G
M
L
01 & 02
01
H
K
K
I
please note that Bolt (M) x 8
+ Flat washer (I) x 8 are
prefixed into parts 1 & 2
I
4
3

X 8
07
X 28
X 14
11
07 07
07
07
12
09
05
09
L
AI
X 2
X 4
16
LE
I
B
N
5
6
14

08
X 6
I
J
C
L
Check that the frame is central by adjusting
the alignment of the frame and brackets
before fully tightening all bolts. The metal
frame should not contact the faux leather
at any point.
X 4
08
13
N
B
B
7
8

09
Note:
It is imperative that the bed is aligned squarely to prevent the frame
from catching on and damaging the upholstered side rails.
Please use extra caution when opening and closing the bed for the
first few times.
Ensure a similar spacing on each side of the frame.
Attention :
Place the mattress onto the frame BEFORE closing or this could result in damage to the
bed.
(MATTRESS NOT INCLUDED)
10
9

10
General Care
Wipe clean with a slightly damp soft cloth.
Avoid the use of all household cleaners and abrasives.
When moving your furniture, carefully lift into place.
Never drag or push the pieces across the floor as this
will cause damage to the joints and could result in failure
to the product that will invalidate the warranty.
Recommendations
Periodical re-tightening of fixings.
Warning
This unit is heavy. Please use an assistant when lifting.
Notes
We've tried to make this piece of furniture as easy to
assemble as possible.
In the unlikely event that you have problems putting
it together or have damaged or missing pieces,
please contact our customer services on 01623 727374
Julian Bowen Limited
Bentinck House, Park Lane Business Park, Kirkby-in-Ashfield, Notts, NG17
9LE
www.julian-bowen.co.uk