Julian Bowen HUD002 User manual

DINING CHAIR
ASSEMBLY
INSTRUCTIONS
Before you start...
Please carefully unpack and lay out all of the component parts to ensure nothing
is missing and to check each component for any obvious damage.
Should you identify any concerns at this stage please contact the retailer from
whom this product was purchased. Please quote your order number, details of
your issue, the product code, and the batch number from the cartons which will
help to resolve your issue as quickly as possible.
Version Number - 1.0 Product Code - HUD002
- HUD004
960mm
750mm 450mm
Approximate Assembly Time People Required to Assemble
30min
No Extra
Tools Required

A
M6 x 40mm
2 x
B
M6 x 50mm
4 x
C
Please check all hardware matches the list below. Should
you notice any are missing please contact your retailer.
We strongly advise that you do not use Power Tools, such as
drills or electric screwdrivers during the assembly as this
may cause irreparable damage and will invalidate your
warranty.
M6 x 80mm
4 x
Spring Washer M6
10 x
D
Flat Washer M6 x 19mm
10 x
Allen Key M4
1 x
F
E

PARTS
Please ensure you carefully check all the pieces, should you have any
concerns please contact the retailer before assembly commences.
Please have your order number, details of the issue, the product code,
and the batch number from the cartons as this will help us to resolve
your issue much faster.

ASSEMBLY ADVICE
Please take the time to carefully read through these instructions
before you commence.
Keep these instructions for future reference.
We advise that the product is assembled in the room it is intended for.
We advise that you keep the hardware in a bowl during assembly to
avoid losing anything.
We strongly recommend that you keep children away from the work
area.
Small component parts could choke a child if swallowed.
We recommend you use a sheet or blanket to protect both floor and
product through the assembly stages.
This product is heavy, and we recommend a 2 person lift to avoid
personal injury or damage to the product.
Never push or pull the product as this could cause both personal injury
or irreparable damage to product or floor.
We have tried to make this piece of furniture easy to assemble if the
instructions are followed carefully.
In the unlikely event that you have problems with assembling the
product or have missing or damaged parts, please contact your
retailer and we will assist them in rectifying the problem as quickly as
possible.
Please remember we strongly urge you DO NOT use power tools such
as drill or electric screwdrivers as this could cause irreparable damage
to your product and will invalidate your warranty.

1
B
D
E
F
03
03
02
2
F
E
D
01
02
A
Please do not fully tighten any
bolts until the final step.

3
General Care
Wipe clean with a slightly damp soft cloth.
Avoid the use of all household cleaners and abrasives.
When moving your furniture, carefully lift into place.
Never drag or push the pieces across the floor as this will cause
damage to the joints and could result in failure to the product
that will invalidate the warranty.
Recommendations Periodical re-tightening of fixings.
4
DE
FC
IMPORTANT Carefully turn the chair upright and place on a flat surface.
Make adjustments to ensure that the chair frame is straight and that the
legs are even on the floor then
FULLY TIGHTEN ALL BOLTS assembled in previous steps using Allen key (F).