julu Laundry Ladder User manual
Safety Instructions
Read before Assembling, Installing and Using.
For safe use:
•Laundry Ladder rope must ALWAYS be secured to the ladder using the rope hook.
•Keep fingers away from pinch points when opening or closing Laundry Ladder.
•Do not let children play on Laundry Ladder.
•Do not place objects that exceed 44 Lbs (20Kg) on Laundry Ladder
•Regularly check that all screws are securely tightened and spindle is securely
attached and replace if any signs of wear and tear.
•Check cord is securely attached and replace cord if any signs of wear and tear.
To attach to the wall:
•Do not place it in a location that will get in people’s way when it is open.
•The Julu Laundry Ladder brackets must be securely fixed to a solid clean wall using
the enclosed screws.
•For all other types of walls, Julu recommends you seek professional advice from
your local builder or decorator. Some walls use different materials and you may
need to use other attachment methods.
•Wall coverings such as wall paper may be adversely affected through product use.
Don’t leave Laundry Ladder outside when not in use as the unit will naturally deteriorate in
outdoor weather conditions.
No two pieces of wood are exactly the same and some movement should be allowed.
Colour, grain and texture can vary considerably even in the same piece. The random
occurrence of characteristics is an inherent part of the beauty of any natural wooden
product; as are variations in colour and texture.
Whilst Julu make every effort to give high customer satisfaction, if there is an issue with the
product or service, please contact us so that we can try and rectify any problems
.
Spindle
Laundry
Ladder
In the box
1 x Laundry Ladder
2 x Julu Wall Brackets
4 x Screws + Caps
4 x Raw Plugs
1 x Length of Cord
1 x Spindle + Screw (which is attached
to the inside of the Laundry Ladder
Frame for delivery only)
1 x Rope Hook
1 x Instruction Leaflet
Fixings are ONLY included for solid
walls. All other types i.e. Cavity,
Thermolite Block etc. will require
additional fixings which can be bought
from good hardware stores.
The spindle is attached to the inside of
Laundry Ladder for delivery only.
Unscrew and re-position on the
outside of unit, at the bottom of the
back frame either right or left
depending on the preferred side you
are going to operate it from.
The back frame is lower than the front
frame.
See reverse side for stringing and other
instructions and keep all instructions
for future use/reference.
A video for stringing:
‘How to string your Laundry Ladder’
can be found on the website at:
www.juluhome.co.uk
Fixing to a Solid Wall (fixings
included)
Decide on the height. Julu
recommends positioning the Laundry
Ladder base, at waist height to aid
functionality.
Use Ø 7 mm drill
Brackets to be positioned:
52cm apart Bunty (600)
72cm apart Doris (800)
Spindle Attachment
•This is not a toy.
Not suitable for
children.
•Be careful not to
pinch fingers.
•Do not exceed
weights of
20kg/44lb
•Always secure with
rope hook.
•Always read the
instructions.
WARNING: To minimize the risk of injury or damage, read both sides of these instructions before
assembling, installing and using. Always keep instructions for future reference by other users.
Assembly –
Stringing/Threading Instructions
•The Back Frame which hooks onto the
wall is lower than the front.
•Thread the cord through both holes of
the small hook provided as shown in
Fig.1
•On the side which you intend to
operate the Laundry Ladder, attach
the spindle (fig.2) to the outside (this
is found inside the Laundry Ladder for
delivery ONLY, to protect it) using the
hole at the bottom of the back frame.
•With spindle now attached, follow the
instructions for Right or Left
operation.
For Video Instructions
‘How to string your Laundry Ladder’
go to: www.juluhome.co.uk plus
the latest printable instructions!
For LEFT side operation (see
Assembly first)
1. Thread one end of the cord through A2
(from outside to inside)
2. Take the same thread to B1 (inside to
outside) and thread back through B2,
knot and secure.
3. Thread the other end of cord through
A1 (outside to inside).
4. Thread through C1 (inside to outside)
and back through C2.
5. Thread cord through D1 (inside to
outside) and back through D2, knot and
secure the end.
6. Now pull all cord tight through arm A
and adjust it so that the hook is at the
furthest end of the cord and taut.
7. Secure unit by guiding cord under
spindle and place hook over the highest
rod the cord will allow. Use this
position when not in use.
D
C
B
A
Back Frame
Fig.2
Spindle (Fig 2) is attached
to the inside of unit for
protection during delivery
only.
1. Thread one end of the cord through C2
(From outside to inside)
2. Take the same thread to D1 (inside to
outside) and thread back through D2,
knot and secure.
3. Thread the other end of cord through C1
(outside to inside).
4. Thread through A1 (inside to outside) and
back through A2.
5. Thread cord through B1 (inside to
outside) and back through B2, knot and
secure the end.
6. Now pull all cord tight through arm C and
adjust it so that the hook is at the furthest
end of the cord and taut.
7. Secure unit by guiding cord under spindle
and place hook over the highest rod the
cord will allow. Use this position when
not in use.
For RIGHT side operation (see
Assembly first)
Love your Laundry!
Please leave a review on
facebook or google, or email us
with a testimonial & picture!
Julu Ltd, Wharton Farm Cottage,
Ross-on-Wye, Herefordshire HR9 5SX
Email: info@juluhome.co.uk
Tel: 033 022 32 855
Warning
Read and follow these
instructions. Failure to properly
assemble, install and use the
Laundry Ladder could result in
unforeseen risk or injury.
Updated: 28.2.18
® This product is protected by EU
Design Registration Number
002220046-0001
The Trade Mark JULU is protected in
other countries as well as European
Union under trade mark number
012618674.
This product has been tested and
passed testing standards: BS EN 16121:
2013 ANSI BIFMA X5.9: 2012
Use this illustration to help
Threading the Laundry Ladder
right or left-handed
