Jumper T12 User manual

When the battery is the T12 or the model is too low to function.
T12 radio system under the
Please take a moment to read this quick start reference before using your new T12 radio.
Happy flying!
Many radio control models are equipped with powerful motors and sharp spinning propellers. Please exercise caution when
working on models. Ensure power is disconnected from your models and remove propellers when performing maintenance.
Do not operate the follow conditions.
•During bad weather or high wind conditions such as rain, hail, snow, storms or electromagnetic events.
•During any conditions of limited visibility.
•In areas where people, property, powerlines, roads, vehicles or animals may be in present.
•If you are felling tired or unwell or under the influence of drugs or alcohol.
•If the radio or model appear to be damaged or not functioning correctly.
•In areas of high 2.4ghz interference or in locations where use of 2.4ghz radios is prohibited.
•
T12 Quick start guide
-The T12 Development team.
MULTIPROTOCOL TX
The Multi-Protocol radio features a compact size and a host of protocol options
all built in to one product. Various protocols can be quickly and easily selected
from the model menu allowing you to bind the radio to just about any major
protocol in today’s market. T12 firmware only activate the CC2500 RF Chip
module and also features sound and
vibration alerts, back lit LCD display, smooth gimbals and assignable switches .

The T12 comes with a 4 x AA Battery
1: Antenna
2: Handle
3: SWC three-segment switch
4: SWH two-segment switch
5: SWA three-segment switch
6: AUX5 knob
7: RF indicator
8: Throttle / Aileron
9: Power switch
10: Digital trim key
11: Digital trim key
12: Menu direction key
13: Display Screen
14: Exit key
15: Confirm key
16: Digital trim key
17: Digital trim key
18: Direction / Tilt Joystick
19: Power Indicator
20: AUX4 Knob
21: SWD three-segment switch
22: SWG two-segment switch
23: SWB three-segment switch
tray (Batteries not included). Alkaline, Nicad or NiMH batteries are
suitable for use in this radio. If Using Alkaline batteries, it is recommended to remove the batteries if the radio will not be
used frequently or for any length of time to avoid any corrosion damage from leaking batteries.

The T12 is cable of operating under many different protocols. To view the most up to date list of
compatible protocols please visit https://www.deviationtx.com. Please note, new protocols are being added to the
software all the time. Some protocols may require the upgrading of your firmware.
Model Selection.
To enter the model setup, press the ENTER button and select Model Menu >
Model setup. From here you can create or load models. Model name can be
input and the default icon also selected. Model type can be selected to suit your
model. TX Power cann't be adjusted. Below the “PPM In” you will find the
protocol selection function. Here you can choose one of the many protocols
available. The Bind button is used to start the binding process.
NOTE
The Deviation software is very powerful and capable of a great
amount of programing and functionality. We recommend
downloading the comprehensive software setup guide from the link below for
more detailed instructions. http://www.jumper.xyz

For a detailed user manual for the T12 version of the Deviation TX software please visit
Please retain your proof of purchase and contact the retailer you purchased your T12 from s
Specs Size: 188 mm(L) ×151mm(W)×86mm(H)
Weight: 338g (without battery)
Transmission frequency:2404.1-2473.1MHZ
Antenna gain: 2dBi(detachable antenna, easy modification)
Working current: [email protected]
Working voltage: DC6V (factory with 4 * AA battery box, lithium battery recommended 2s balanced head line,
batteries not included)
Open source firmware: Deviation TX
Number of channels: up to 47 channels
Display: 2.42-inch OLED display, 128 * 64 resolution
Gimbal: non-contact 3D space vector Hall joystick
JR/FrSKY compatible module bay on rear side
Upgrade method: USB online upgrade Support
Protocols: Walkera full range DSM2/X full range Flysky and Flysky 2A FrSKY (Visit https://www.deviationtx.com for the full
list)
Warranty and Repairs.
hould you experience any
problems with your radios hardware.
Firmware updates and Deviation TX information.
For latest news and firmware updates from the Deviation Open-Source software development team please visit the
Deviation TX website at https://www.deviationtx.com
User Manual.
http://www.jumper.xyz
Model Binding and Community support.
Thank you to all the community contributors who are regularly adding how to guides on Youtube.com. If you are having
trouble binding a model, we suggest searching YouTube as there may already be a guide and discussion taking place.
Alternatively, you may wish to join the friendly community on the Deviation TX forum at
https://www.deviationtx.com/forum/index

FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with part 15 ofthe FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.