Juniper SRX550 Installation instructions

SRX550 High Memory Services Gateway
Hardware Guide
Published
2019-12-30

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in
the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks
are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right
to change, modify, transfer, or otherwise revise this publication without notice.
SRX550 High Memory Services Gateway Hardware Guide
Copyright © 2019 Juniper Networks, Inc. All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related
limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)
Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement
(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you
agree to the terms and conditions of that EULA.
ii

Table of Contents
About the Documentation | xi
Documentation and Release Notes | xi
Using the Examples in This Manual | xi
Merging a Full Example | xii
Merging a Snippet | xiii
Documentation Conventions | xiii
Documentation Feedback | xvi
Requesting Technical Support | xvi
Self-Help Online Tools and Resources | xvii
Creating a Service Request with JTAC | xvii
Overview
1
SRX550 High Memory (SRX550 HM) Services Gateway Overview | 21
SRX550 High Memory Services Gateway Description | 21
SRX550 High Memory Services Gateway Hardware Features | 22
SRX550 High Memory Services Gateway Software Features and Licenses | 22
SRX550 High Memory Services Gateway Power over Ethernet | 27
Accessing the SRX550 High Memory Services Gateway | 28
SRX550 High Memory Services Gateway Boot Devices and Dual-Root Partitioning Scheme | 29
Benefits of the SRX550 High Memory Services Gateway | 30
SRX550 HM Chassis | 30
SRX550 High Memory Services Gateway Chassis | 30
SRX550 High Memory Services Gateway Front Panel | 31
SRX550 High Memory Services Gateway Front Panel LEDs | 35
SRX550 High Memory Services Gateway Back Panel | 38
SRX550 HM Cooling System | 39
SRX550 HM Power System | 40
SRX550 High Memory Services Gateway Power Supply | 40
SRX550 High Memory Services Gateway Supported AC Power Cords | 43
SRX550 High Memory Services Gateway AC Power Supply Electrical Specifications | 44
iii

SRX550 High Memory Services Gateway DC Power Cable Specifications | 45
SRX550 High Memory Services Gateway DC Power Supply Electrical Specifications | 45
SRX550 HM Interface Modules | 46
SRX550 High Memory Services Gateway Gigabit-Backplane Physical Interface Modules | 46
SRX550 High Memory Services Gateway Mini-Physical Interface Modules | 48
Site Planning, Preparation, and Specifications
2
Site Preparation Checklist for the SRX550 HM Services Gateway | 53
SRX550 HM Site Guidelines and Requirements | 55
General Site Installation Guidelines for the SRX550 High Memory Services Gateway | 55
SRX550 High Memory Services Gateway Environmental Specifications | 56
SRX550 High Memory Services Gateway Electrical Wiring Guidelines | 57
SRX550 High Memory Services Gateway Grounding Specifications | 58
SRX550 High Memory Services Gateway Physical Specifications | 59
Clearance Requirements for Airflow and Hardware Maintenance of the SRX550 High Memory
Services Gateway | 60
Rack Requirements for the SRX550 High Memory Services Gateway | 61
Rack-Mounting Requirements and Warnings | 61
SRX550 High Memory Services Gateway Rack Size and Strength Requirements | 66
SRX550 High Memory Services Gateway Spacing of Mounting Bracket and Flange
Holes | 67
Cabinet Requirements for the SRX550 High Memory Services Gateway | 67
SRX550 High Memory Services Gateway Cabinet Size and Clearance Requirements | 67
SRX550 High Memory Services Gateway Cabinet Airflow Requirements | 68
SRX550 HM Cable Specifications and Pinouts | 68
Interface Cabling and Wiring Specifications for the SRX550 High Memory Services
Gateway | 68
RJ-45 Connector Pinouts for the SRX550 High Memory Services Gateway Ethernet Port | 69
RJ-45 Connector Pinouts for the SRX550 High Memory Services Gateway Console Port | 70
SRX550 HM Network Cable and Transceiver Planning | 71
SRX550 HM Transceiver Support | 71
iv

Initial Installation and Configuration
3
SRX550 HM Installation Overview | 75
SRX550 High Memory Services Gateway Installation Overview | 75
SRX550 High Memory Services Gateway Autoinstallation Overview | 75
Unpacking and Mounting the SRX550 HM | 76
Unpacking the SRX550 High Memory Services Gateway | 77
Verifying Parts Received with the SRX550 High Memory Services Gateway | 78
Preparing the SRX550 High Memory Services Gateway for Rack-Mount Installation | 79
Installing the SRX550 High Memory Services Gateway in a Rack | 80
Connecting the SRX550 HM to Power | 82
Connecting the SRX550 HM Grounding Cable | 83
Installing an AC Power Supply on the SRX550 High Memory Services Gateway | 84
Connecting the SRX550 High Memory Services Gateway to the AC Power Source | 85
Installing a DC Power Supply on the SRX550 High Memory Services Gateway | 87
Connecting the SRX550 High Memory Services Gateway to a DC Power Source | 90
Powering On the SRX550 High Memory Services Gateway | 93
Powering Off the SRX550 High Memory Services Gateway | 93
Connecting the SRX550 HM to External Devices | 94
Connecting the Modem to the Console Port on the SRX550 High Memory Services
Gateway | 94
Connecting to the SRX550 High Memory Services Gateway from the CLI with the USB Console
Port | 95
Connecting the CLI at the User End for the SRX550 High Memory Services Gateway | 97
Configuring the Modem at the SRX550 High Memory Services Gateway End | 98
Configuring Junos OS on the SRX550 HM | 100
SRX550 High Memory Services Gateway Basic Connectivity Overview | 100
Built-In Ethernet Ports for the SRX550 High Memory Services Gateway | 101
Viewing Factory-Default Settings of the SRX550 High Memory Services Gateway | 104
Management Access for the SRX550 High Memory Services Gateway | 104
v

SRX550 High Memory Services Gateway Secure Web Access Overview | 105
Configuring Zero-Touch Provisioning on SRX Series Devices | 106
Configuring the SRX550 High Memory Services Gateway Using J-Web | 107
Configuring Root Authentication | 107
Connect the Management Device to the Ethernet Port | 108
Verify the Settings | 109
Connecting to the SRX550 High Memory Services Gateway from the CLI Locally | 109
Connecting to the SRX550 High Memory Services Gateway from the CLI Remotely | 111
Configuring the SRX550 High Memory Services Gateway Using the CLI | 112
Configuring Gigabit-Backplane Physical Interface Modules | 115
Configuring Mini-Physical Interface Modules | 116
Using the J-Web Interface | 117
Using the CLI | 118
Maintaining Components
4
Maintaining the SRX550 HM Components | 123
Required Tools and Parts for Maintaining the SRX550 High Memory Services Gateway
Hardware Components | 123
Routine Maintenance Procedures for the SRX550 High Memory Services Gateway | 123
Maintaining the SRX550 HM Cooling System Components | 124
Maintaining the SRX550 HM Power System | 124
Maintaining the SRX550 High Memory Services Gateway Power Supply | 124
Replacing the AC Power Supply on the SRX550 High Memory Services Gateway | 125
Disconnecting an AC Power Cord from the SRX550 High Memory Services Gateway | 125
Removing an AC Power Supply from the SRX550 High Memory Services Gateway | 126
Installing an AC Power Supply on the SRX550 High Memory Services Gateway | 127
Connecting an AC Power Cord to the SRX550 High Memory Services Gateway | 128
Replacing a DC Power Supply on the SRX550 High Memory Services Gateway | 129
Removing a DC Power Supply Cable from the SRX550 High Memory Services Gateway | 130
Removing a DC Power Supply from the SRX550 High Memory Services Gateway | 130
Installing a DC Power Supply on the SRX550 High Memory Services Gateway | 132
vi

Maintaining the SRX550 HM Interface Modules | 135
Replacing Mini-Physical Interface Modules on the SRX550 High Memory Services Gateway | 135
Removing a Mini-Physical Interface Module | 136
Installing a Mini-Physical Interface Module | 136
Removing a Blank Mini-Physical Interface Module Faceplate | 137
Installing a Blank Mini-Physical Interface Module Faceplate | 138
Replacing Gigabit-Backplane Physical Interface Modules on the SRX550 High Memory Services
Gateway | 138
Removing a Gigabit-Backplane Physical Interface Module | 138
Installing a Gigabit-Backplane Physical Interface Module | 139
Removing a Blank Gigabit-Backplane Physical Interface Module Faceplate | 141
Installing a Blank Gigabit-Backplane Physical Interface Module Faceplate | 141
Troubleshooting Hardware
5
Troubleshooting the SRX550 HM | 145
Troubleshooting with the CLI on the SRX550 High Memory Services Gateway | 145
Troubleshooting with LEDs on the SRX550 High Memory Services Gateway | 145
Troubleshooting with Chassis and Interface Alarm Messages on the SRX550 High Memory
Services Gateway | 148
Troubleshooting the Power System on the SRX550 High Memory Services Gateway | 150
Using the RESET CONFIG Button on the SRX550 High Memory Services Gateway | 153
Changing the RESET CONFIG Button Behavior | 154
Contacting Customer Support and Returning the Chassis or Components
6
Returning the SRX550 HM Chassis or Components | 157
Contacting Customer Support | 157
Return Procedure for the SRX550 High Memory Services Gateway | 158
Locating the SRX550 High Memory Services Gateway Chassis Serial Number and Agency
Label | 159
Locating the SRX550 High Memory Services Gateway Mini-PIM and GPIM Serial Number
Labels | 159
Listing the SRX550 High Memory Services Gateway Component Serial Numbers with the
CLI | 160
Required Tools and Parts for Packing the SRX550 High Memory Services Gateway | 161
Packing the SRX550 High Memory Services Gateway for Shipment | 162
Packing SRX550 High Memory Services Gateway Components for Shipment | 163
vii

Safety and Compliance Information
7
Definitions of Safety Warning Levels | 167
General Safety Guidelines and Warnings | 170
Restricted Access Warning | 172
Qualified Personnel Warning | 175
Prevention of Electrostatic Discharge Damage | 175
Fire Safety Requirements | 177
Fire Suppression | 177
Fire Suppression Equipment | 177
Laser and LED Safety Guidelines and Warnings | 178
General Laser Safety Guidelines | 178
Class 1 Laser Product Warning | 179
Class 1 LED Product Warning | 180
Laser Beam Warning | 181
Radiation from Open Port Apertures Warning | 182
Maintenance and Operational Safety Guidelines and Warnings | 183
Battery Handling Warning | 184
Jewelry Removal Warning | 185
Lightning Activity Warning | 187
Operating Temperature Warning | 188
Product Disposal Warning | 190
Action to Take After an Electrical Accident | 191
General Electrical Safety Guidelines and Warnings | 191
AC Power Electrical Safety Guidelines | 192
viii

DC Power Electrical Safety Guidelines and Warnings | 193
SRX550 High Memory Services Gateway Agency Approvals | 204
SRX550 High Memory Services Gateway Acoustic Noise Compliance Statements | 205
SRX550 High Memory Services Gateway Compliance Statements for EMC
Requirements | 206
Canada | 206
European Community | 206
Israel | 207
Japan | 207
United States | 207
Lithium Battery | 208
ix

About the Documentation
IN THIS SECTION
Documentation and Release Notes | xi
Using the Examples in This Manual | xi
Documentation Conventions | xiii
Documentation Feedback | xvi
Requesting Technical Support | xvi
Use this guide to install hardware and perform initial software configuration, routine maintenance, and
troubleshooting for the SRX550 High Memory Services Gateway. After completing the installation and
basic configuration procedures covered in this guide, refer to the Junos OS documentation for information
about further software configuration.
Documentation and Release Notes
To obtain the most current version of all Juniper Networks®technical documentation, see the product
documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the documentation, follow the
product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.
These books go beyond the technical documentation to explore the nuances of network architecture,
deployment, and administration. The current list can be viewed at https://www.juniper.net/books.
Using the Examples in This Manual
If you want to use the examples in this manual, you can use the load merge or the load merge relative
command. These commands cause the software to merge the incoming configuration into the current
candidate configuration. The example does not become active until you commit the candidate configuration.
xi

If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example
isafull example. In this case, use the load merge command.
If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In
this case, use the load merge relative command. These procedures are described in the following sections.
Merging a Full Example
To merge a full example, follow these steps:
1. From the HTML or PDF version of the manual, copy a configuration example into a text file, save the
file with a name, and copy the file to a directory on your routing platform.
For example, copy the following configuration to a file and name the file ex-script.conf. Copy the
ex-script.conf file to the /var/tmp directory on your routing platform.
system {
scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces {
fxp0 {
disable;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
}
2. Merge the contents of the file into your routing platform configuration by issuing the load merge
configuration mode command:
[edit]
user@host# load merge /var/tmp/ex-script.conf
load complete
xii

Merging a Snippet
To merge a snippet, follow these steps:
1. From the HTML or PDF version of the manual, copy a configuration snippet into a text file, save the
file with a name, and copy the file to a directory on your routing platform.
For example, copy the following snippet to a file and name the file ex-script-snippet.conf. Copy the
ex-script-snippet.conf file to the /var/tmp directory on your routing platform.
commit {
file ex-script-snippet.xsl; }
2. Move to the hierarchy level that is relevant for this snippet by issuing the following configuration mode
command:
[edit]
user@host# edit system scripts
[edit system scripts]
3. Merge the contents of the file into your routing platform configuration by issuing the load merge
relative configuration mode command:
[edit system scripts]
user@host# load merge relative /var/tmp/ex-script-snippet.conf
load complete
For more information about the load command, see CLI Explorer.
Documentation Conventions
Table 1 on page xiv defines notice icons used in this guide.
xiii

Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware
damage.
Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
Table 2 on page xiv defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type
the configure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on
the terminal screen.
Fixed-width text like this
•A policy term is a named structure
that defines match conditions and
actions.
•Junos OS CLI User Guide
•RFC 1997, BGP Communities
Attribute
•Introduces or emphasizes important
new terms.
•Identifies guide names.
•Identifies RFC and Internet draft
titles.
Italic text like this
xiv

Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
Configure the machine’s domain
name:
[edit]
root@# set system domain-name
domain-name
Represents variables (options for
which you substitute a value) in
commands or configuration
statements.
Italic text like this
•To configure a stub area, include
the stub statement at the [edit
protocols ospf area area-id]
hierarchy level.
•The console port is labeled
CONSOLE.
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy
levels; or labels on routing platform
components.
Text like this
stub <default-metric metric>;Encloses optional keywords or
variables.
< > (angle brackets)
broadcast | multicast
(string1 |string2 |string3)
Indicates a choice between the
mutually exclusive keywords or
variables on either side of the symbol.
The set of choices is often enclosed
in parentheses for clarity.
| (pipe symbol)
rsvp { # Required for dynamic MPLS
only
Indicates a comment specified on the
same line as the configuration
statement to which it applies.
# (pound sign)
community name members [
community-ids ]
Encloses a variable for which you can
substitute one or more values.
[ ] (square brackets)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
Identifies a level in the configuration
hierarchy.
Indention and braces ( { } )
Identifies a leaf statement at a
configuration hierarchy level.
; (semicolon)
GUI Conventions
xv

Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
•In the Logical Interfaces box, select
All Interfaces.
•To cancel the configuration, click
Cancel.
Represents graphical user interface
(GUI) items you click or select.
Bold text like this
In the configuration editor hierarchy,
select Protocols>Ospf.
Separates levels in a hierarchy of
menu selections.
>(bold right angle bracket)
Documentation Feedback
We encourage you to provide feedback so that we can improve our documentation. You can use either
of the following methods:
•Online feedback system—Click TechLibrary Feedback, on the lower right of any page on the Juniper
Networks TechLibrary site, and do one of the following:
•Click the thumbs-up icon if the information on the page was helpful to you.
•Click the thumbs-down icon if the information on the page was not helpful to you or if you have
suggestions for improvement, and use the pop-up form to provide feedback.
•E-mail—Send your comments to [email protected]. Include the document or topic name,
URL or page number, and software version (if applicable).
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance Center (JTAC).
If you are a customer with an active Juniper Care or Partner Support Services support contract, or are
xvi

covered under warranty, and need post-sales technical support, you can access our tools and resources
online or open a case with JTAC.
•JTAC policies—For a complete understanding of our JTAC procedures and policies, review the JTAC User
Guide located at https://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
•Product warranties—For product warranty information, visit https://www.juniper.net/support/warranty/.
•JTAC hours of operation—The JTAC centers have resources available 24 hours a day, 7 days a week,
365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called
the Customer Support Center (CSC) that provides you with the following features:
•Find CSC offerings: https://www.juniper.net/customers/support/
•Search for known bugs: https://prsearch.juniper.net/
•Find product documentation: https://www.juniper.net/documentation/
•Find solutions and answer questions using our Knowledge Base: https://kb.juniper.net/
•Download the latest versions of software and review release notes:
https://www.juniper.net/customers/csc/software/
•Search technical bulletins for relevant hardware and software notifications:
https://kb.juniper.net/InfoCenter/
•Join and participate in the Juniper Networks Community Forum:
https://www.juniper.net/company/communities/
•Create a service request online: https://myjuniper.juniper.net
To verify service entitlement by product serial number, use our Serial Number Entitlement (SNE) Tool:
https://entitlementsearch.juniper.net/entitlementsearch/
Creating a Service Request with JTAC
You can create a service request with JTAC on the Web or by telephone.
•Visit https://myjuniper.juniper.net.
•Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, see
https://support.juniper.net/support/requesting-support/.
xvii

1
CHAPTER
Overview
SRX550 High Memory (SRX550 HM) Services Gateway Overview | 21
SRX550 HM Chassis | 30
SRX550 HM Cooling System | 39
SRX550 HM Power System | 40
SRX550 HM Interface Modules | 46

SRX550 High Memory (SRX550 HM) Services Gateway
Overview
IN THIS SECTION
SRX550 High Memory Services Gateway Description | 21
SRX550 High Memory Services Gateway Hardware Features | 22
SRX550 High Memory Services Gateway Software Features and Licenses | 22
SRX550 High Memory Services Gateway Power over Ethernet | 27
Accessing the SRX550 High Memory Services Gateway | 28
SRX550 High Memory Services Gateway Boot Devices and Dual-Root Partitioning Scheme | 29
Benefits of the SRX550 High Memory Services Gateway | 30
SRX550 High Memory Services Gateway Description
The SRX550 High Memory Services Gateway is a large branch office gateway that combines security,
routing, switching, and WAN interfaces with next-generation firewall and advanced threat mitigation
capabilities for cost-effective, secure connectivity across distributed enterprise locations. The services
gateway simplifies network complexity, protects and prioritizes network resources, and improves user and
application experience.
The SRX550 High Memory Services Gateway has a modular 2U chassis that fits a 19-inch rack with a
depth of approximately 18.1 inches. The SRX550 High Memory Services Gateway comes with 4 GB of
DRAM memory and 8 GB of flash memory.
Figure 1 on page 22 shows the SRX550 High Memory Services Gateway.
21

Figure 1: SRX550 High Memory Services Gateway
SRX550 High Memory Services Gateway Hardware Features
The SRX550 High Memory Services Gateway provides the following features:
•Symmetric Multiprocessing-based data forwarding.
•Hardware-based control and data plane separation.
•Six on-board 10/100/1000Base-T Gigabit Ethernet ports.
•Four on-board SFP Gigabit Ethernet ports.
•Support for dual AC or dual DC power supplies with a redundant configuration in the chassis. 645 W
AC and DC power supplies with or without Power over Ethernet (PoE) support. The AC and DC power
supplies are hot-swappable.
•Junos OS support for advanced security and routing services on the Services and Routing Engine (SRE).
•The services gateway supports Gigabit-Backplane Physical Interface Modules (GPIMs) and also Mini
Physical Interface Modules (Mini-PIMs).
SRX550 High Memory Services Gateway Software Features and Licenses
The services gateway provides the software features listed in Table 3 on page 23.
NOTE: Some software features require the purchase of a separate license.
For information about features that require a license on this services gateway, see the Installation and
Upgrade Guide for Security Devices.
22