Juniper XRE200 - Installation instructions

XRE200 External Routing Engine Hardware
Guide
Published
2020-12-15

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in
the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks
are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right
to change, modify, transfer, or otherwise revise this publication without notice.
XRE200 External Routing Engine Hardware Guide
Copyright © 2020 Juniper Networks, Inc. All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related
limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)
Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement
(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you
agree to the terms and conditions of that EULA.
ii

Table of Contents
About the Documentation | ix
Documentation and Release Notes | ix
Using the Examples in This Manual | ix
Merging a Full Example | x
Merging a Snippet | xi
Documentation Conventions | xi
Documentation Feedback | xiv
Requesting Technical Support | xiv
Self-Help Online Tools and Resources | xv
Creating a Service Request with JTAC | xv
Overview
1
XRE200 System Overview | 17
XRE200 External Routing Engine Hardware Overview | 17
Benefits of the XRE200 External Routing Engine | 18
Software | 18
Physical Specifications | 19
Virtual Chassis Control Interface Modules | 19
Hard Disk Drive Modules | 20
Power Supplies | 20
Fan Modules | 20
XRE200 External Routing Engine Hardware Configurations | 20
Chassis Physical Specifications for an XRE200 External Routing Engine | 21
Field-Replaceable Units for an XRE200 External Routing Engine | 22
XRE200 Chassis | 23
Front Panel of an XRE200 External Routing Engine | 24
Rear Panel of an XRE200 External Routing Engine | 25
LCD Panel in an XRE200 External Routing Engine | 25
LCD Panel Modes | 26
LCD Panel Menus | 27
iii

Chassis LEDs on an XRE200 External Routing Engine | 30
Management Port LEDs on an XRE200 External Routing Engine | 31
Virtual Chassis Port LEDs on an XRE200 External Routing Engine | 32
XRE200 Cooling System | 33
XRE200 Power System | 35
AC Power Supply in an XRE200 External Routing Engine | 35
AC Power Supply LED in XRE200 External Routing Engines | 36
AC Power Specifications for XRE200 External Routing Engines | 37
AC Power Cord Specifications for XRE200 External Routing Engines | 37
DC Power Supply in an XRE200 External Routing Engine | 38
DC Power Supply LED in XRE200 External Routing Engines | 39
DC Power Specifications for an XRE200 External Routing Engine | 40
DC Power Lug Specifications for an XRE200 External Routing Engine | 41
XRE200 Modules | 41
Virtual Chassis Control Interface (VCCI) Modules in an XRE200 External Routing Engine | 42
Hard Disk Drive (HDD) Module in an XRE200 External Routing Engine | 43
Hard Disk Drive LEDs on an XRE200 External Routing Engine | 44
Site Planning, Preparation, and Specifications
2
Site Preparation Checklist for an XRE200 | 47
XRE200 Site Guidelines and Requirements | 49
Environmental Requirements and Specifications for EX Series Switches | 49
General Site Guidelines | 54
Site Electrical Wiring Guidelines | 55
Rack Requirements | 55
Cabinet Requirements | 57
Clearance Requirements for Airflow and Hardware Maintenance for an XRE200 External
Routing Engine | 58
XRE200 Network Cable and Transceiver Planning | 59
Pluggable Transceivers Supported on XRE200 External Routing Engines | 59
Cables Connecting the XRE200 External Routing Engine to XRE200 External Routing Engines
and EX8200 Switches | 60
Cables Connecting the XRE200 External Routing Engine to Management Devices | 61
iv

XRE200 Management Cable Specifications and Pinouts | 62
USB Port Specifications for an XRE200 External Routing Engine | 62
Console Port Connector Pinout Information | 63
RJ-45 Management Port Connector Pinout Information | 63
Virtual Chassis Port Connector Pinout Information for RJ-45 Connections on an XRE200
External Routing Engine | 64
Planning an EX8200 Virtual Chassis | 65
Initial Installation and Configuration
3
Unpacking and Mounting the XRE200 | 68
Unpacking an XRE200 External Routing Engine | 68
Register Products—Mandatory to Validate SLAs | 70
Installing and Connecting an XRE200 External Routing Engine | 70
Mounting an XRE200 External Routing Engine on Two Posts in a Rack or Cabinet | 71
Mounting an XRE200 External Routing Engine on Four Posts in a Rack or Cabinet | 73
Connecting the XRE200 to Power | 76
Powering On an XRE200 External Routing Engine | 77
Interconnecting XRE200 External Routing Engines | 78
Connecting AC Power to an XRE200 External Routing Engine | 79
Connecting DC Power to an XRE200 External Routing Engine | 80
Connecting the XRE200 to Management Devices | 83
Connect a Device to a Network for Out-of-Band Management | 83
Connecting an EX8200 Switch to an XRE200 External Routing Engine | 84
Connect a Device to a Management Console Using an RJ-45 Connector | 86
Configuring an EX8200 Virtual Chassis (CLI Procedure) | 87
Maintaining Components
4
Maintaining the XRE200 Cooling System | 92
Removing a Fan Module from an XRE200 External Routing Engine | 92
Installing a Fan Module in an XRE200 External Routing Engine | 93
Maintaining the XRE200 Power System | 94
Removing an AC or DC Power Supply from an XRE200 External Routing Engine | 95
Installing an AC or DC Power Supply in an XRE200 External Routing Engine | 96
v

Maintaining the XRE200 Modules | 98
Installing and Removing XRE200 External Routing Engine Hardware Components | 98
Removing a VCCI Module from an XRE200 External Routing Engine | 99
Installing a VCCI Module in an XRE200 External Routing Engine | 101
Removing an HDD Module from an XRE200 External Routing Engine | 102
Installing an HDD Module in an XRE200 External Routing Engine | 103
Maintain Transceivers | 105
Remove a Transceiver | 105
Remove a QSFP28 Transceiver | 108
Install a Transceiver | 110
Install a QSFP28 Transceiver | 112
Removing an XRE200 from a Rack or Cabinet | 114
Powering Off an XRE200 External Routing Engine | 115
Powering Off an XRE200 External Routing Engine That Has CLI Access | 115
Powering Off an XRE200 External Routing Engine That Does Not Have CLI Access | 117
Removing an XRE200 External Routing Engine from a Rack or Cabinet | 118
Contacting Customer Support and Returning the Chassis or Components
5
Returning an XRE200 Chassis or Components | 121
Returning an XRE200 External Routing Engine for Repair or Replacement | 121
Locating the Serial Number on an XRE200 External Routing Engine or Component | 122
Listing the External Routing Engine and Components Details with the CLI | 122
Locating the Serial Number ID Label on an XRE200 External Routing Engine | 125
Locating Serial Number ID Labels on FRU Components | 126
Contact Customer Support to Obtain Return Material Authorization | 128
Packing an XRE200 External Routing Engine or Component for Shipping | 129
Packing an XRE200 External Routing Engine for Shipping | 129
Safety and Compliance Information
6
General Safety Guidelines and Warnings | 133
Definitions of Safety Warning Levels | 134
Qualified Personnel Warning | 137
Warning Statement for Norway and Sweden | 138
vi

Fire Safety Requirements | 138
Fire Suppression | 138
Fire Suppression Equipment | 138
Installation Instructions Warning | 140
Chassis and Component Lifting Guidelines | 140
Ramp Warning | 141
Rack-Mounting and Cabinet-Mounting Warnings | 141
Grounded Equipment Warning | 147
Radiation from Open Port Apertures Warning | 148
Laser and LED Safety Guidelines and Warnings | 149
General Laser Safety Guidelines | 149
Class 1 Laser Product Warning | 150
Class 1 LED Product Warning | 151
Laser Beam Warning | 152
Maintenance and Operational Safety Guidelines and Warnings | 152
Battery Handling Warning | 154
Jewelry Removal Warning | 155
Lightning Activity Warning | 157
Operating Temperature Warning | 158
Product Disposal Warning | 160
General Electrical Safety Guidelines and Warnings | 161
Action to Take After an Electrical Accident | 162
Prevention of Electrostatic Discharge Damage | 163
AC Power Electrical Safety Guidelines | 164
AC Power Disconnection Warning | 166
DC Power Electrical Safety Guidelines | 167
DC Power Disconnection Warning | 168
DC Power Grounding Requirements and Warning | 170
vii

DC Power Wiring Sequence Warning | 172
DC Power Wiring Terminations Warning | 175
Multiple Power Supplies Disconnection Warning | 178
TN Power Warning | 179
Agency Approvals for EX Series Switches | 179
Compliance Statements for EMC Requirements for EX Series Switches | 180
Canada | 181
Taiwan | 182
European Community | 182
Israel | 182
Japan | 182
Korea | 183
United States | 183
FCC Part 15 Statement | 183
Nonregulatory Environmental Standards | 184
Compliance Statements for Acoustic Noise for EX Series Switches | 185
Statements of Volatility for Juniper Network Devices | 185
viii

About the Documentation
IN THIS SECTION
Documentation and Release Notes | ix
Using the Examples in This Manual | ix
Documentation Conventions | xi
Documentation Feedback | xiv
Requesting Technical Support | xiv
Use this guide to install hardware and perform initial software configuration, routine maintenance, and
troubleshooting for the XRE200 External Routing Engine. After completing the installation and basic
configuration procedures covered in this guide, refer to the Junos OS documentation for information about
further software configuration.
Documentation and Release Notes
To obtain the most current version of all Juniper Networks®technical documentation, see the product
documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the documentation, follow the
product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.
These books go beyond the technical documentation to explore the nuances of network architecture,
deployment, and administration. The current list can be viewed at https://www.juniper.net/books.
Using the Examples in This Manual
If you want to use the examples in this manual, you can use the load merge or the load merge relative
command. These commands cause the software to merge the incoming configuration into the current
candidate configuration. The example does not become active until you commit the candidate configuration.
ix

If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example
isafull example. In this case, use the load merge command.
If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In
this case, use the load merge relative command. These procedures are described in the following sections.
Merging a Full Example
To merge a full example, follow these steps:
1. From the HTML or PDF version of the manual, copy a configuration example into a text file, save the
file with a name, and copy the file to a directory on your routing platform.
For example, copy the following configuration to a file and name the file ex-script.conf. Copy the
ex-script.conf file to the /var/tmp directory on your routing platform.
system {
scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces {
fxp0 {
disable;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
}
2. Merge the contents of the file into your routing platform configuration by issuing the load merge
configuration mode command:
[edit]
user@host# load merge /var/tmp/ex-script.conf
load complete
x