Juvion VibraLite 001JUVI User manual

VibraLite™ Eye Enhancer
Instruction Manual

Warranty card
Product Information
Name: VibraLite™
Colour: Pearl White
Model: 001JUVI
EAN: 5065007222041
One Year Warranty
The Juvi Promise
In the event of a defect or failure of the
product during regular use, Juvi will either
supply replacement parts or supply a new
unit to fix the unit.
Contact [email protected] for more
information or to report a warranty claim.

Important safety information
Do not operate device where it could come in contact with water.
Do not use or charge device with power adapter that is damaged and/or faulty.
Do not harshly bend or abuse the wire of the USB charging cord.
Do not attempt to take the device apart. Device is not serviceable by user. This
will void the warranty.
Disclaimer
This product is not intended to diagnose, cure or prevent any disease.
Eye Wrinkle Remover makes no claims, representations, or warranties regarding
the ability of this product to cure any physical, skin, or mental condition. A
qualified health professional should be consulted with regards to any condition
requiring medical attention.
Warnings
Do not aim or look directly into the lights. Doing so may cause temporary vision
discomfort. Placement of the device should ensure that no part of the device is
covering the eyes.
This device is designed for use on adults over 18 years of age and not
recommended for use on infants or children.
Please consult your doctor prior to use if you are, or suspect you are, pregnant.
Please consult your doctor prior to use if you have, or suspect you have cancer.
Do not use device if it is wet or if it could fall into water while it is plugged in. If
device has fallen into water, do not touch until you first unplug it.
Do not treat if your skin is red or swollen from a previous treatment. Wait until
the redness and swelling have disappeared before treating again. If you have
skin redness or swelling that lasts for more than 2 hours you may have light-
sensitive skin, stop using the device and contact a healthcare professional.
Do not use device to treat skin that is painful to touch, raised (higher than
surrounding skin), crusting or bleeding. This may be a sign of a more serious
condition and should be checked by your doctor.
No modification of this equipment is allowed.
This device contains a Lithium fon Battery. Before disposal of this device, please
review your local laws and requirements surrounding Lithium lon Battery
disposal. The preferred method of disposal is through recycling.

Cautions
Discontinue use if device overheats or becomes uncomfortably hot.
Always unplug device from outlet after charging is complete.
Do not store device in direct sunlight or location with temperatures over 100°
Fahrenheit (38°C) as this may cause damage to the plastic coating.
Use only the supplied Universal USB Power Card. Use of incorrect power cord
could damage device.
Do not attempt to open or repair device or power supply.
Do not drop device on hard surfaces, as this could damage it. Using a damaged
device could result in skin or eye injury.
Do not use device on any area of the body other than around the eyes.
Using the device an other areas of the body has not been tested and the risks
are unknown.
If the area of skin for which you are using the device to treat wrinkles appears
to be worsening, you should cease use and check with your doctor to make
sure you do not have a more serious condition.
Contact your doctor if you have any medical questions regarding use of this
device.
Contraindications
Are taking prescription or over-the-counter drugs known to cause light
sensitivity.
Have any suspicious or cancerous lesions.
Ask your doctor prior to using if you:
Test yourself for light sensitivity prior to using on your face:
1. Power on your device.
2. Place the device on your arm and conduct a full 3-minute treatment.
3. After treatment is complete, visually check the area. if the area has turned red
and lasts for more than 2 hours, your skin has a sensitivity to light. Please
discontinue use.

How it works
Youthful skin is rich in collagen, which gives the skin lift and support. Collagen
works deep within the skin like columns of tissue that support the skin’s surface.
Over time, skin produces less collagen, and with exposure to sunlight, healthy
collagen becomes damaged. This can result in wrinkles, especially around the eyes
(crow’s feet and elevens). The lights from this device penetrate deep within the
layers of your skin to stimulate collagen production, diminishing fine lines and
wrinkles.
Easy to use, the VibraLite is programmed with a 3-minute automatic shutoff
function for professional anti-aging results with short, simple, daily treatments in
the comfort of your own home.
Light wavelength diagram
The VibraLite uses 4 clinically proven wavelengths of light to work on a cellular
level to stimulate new collagen, reduce fine lines and wrinkles, and reduce sun
damage and the visible signs of aging.
What to Expect
Users typically see initial results within 2 weeks, with the best results occurring
after a 10-week course of treatment.

Operating instructions
Use daily.
Use device on clean skin only.
Do not use device after the application of creams that contain SPF as this could
block light penetration.
Wipe device clean after each use
Set up:
1. Unpack your Eye Wrinkle Remover
2. Plug USB power/charging cord into port connector on device.
3. Plug USB power/charging cord into Universal USB Power Adapter (not included)
and into outlet for charging
4. Charge your Eye Wrinkle Remover for 2-4 hours. Device is fully charged when the
indicator light changed from red to green
5. Place device in protective storage bag when not in use. Do not store device in
direct sunlight or location with temperatures over 100° Fahrenheit (38°C) as this
may cause damage to plastic coating.
6. A fully charged device yields 30 minutes of use, approximately 10 treatments.
Instructions for Use:
1. Wash and fully dry face prior to use.
2. Assemble strap by placing snap insert into side cavity and slide horizontally
until it clicks into place.
3. Place device onto face over eyes and adjust strap to fit snugly around head.
4, Power device on. The VibraLite features an automatic shutoff function after
completion of a 3-minute treatment.
5. Remove device from face and wipe device clean (see cleaning instructions).
6. Place device into protective storage bag.
7. After treatment, apply creams or topical treatments as desired.
Helpful Tips for Best Results:

Keep Skin Hydrated
Immediately following treatment, apply a serum or moisturizer of your choice.
Maintenance:
1. This is a medical device. It is important to keep it clean
2. This device has no serviceable parts. Battery is not accessible and not
serviceable. User should not attempt to access or service the battery as this will
damage the device and void the warranty.
3. Device includes only an ON/OFF button. All settings are set to the factory
setting.
4. Charge device only with the supplied USB power/charging cord and a universal
USB power adapter (not included).
5. Compatible Power Supply: 120 V/240 V
Cleaning:
1. Turn device off and unplug from any power source
2. Wipe the tops of the LEDs with alcohol wipes or damp cloth to remove any
residue from skin oils after each use. This is especially important if the device is
being used by more than one individual.
3. Clean device body by using damp or microfiber cloth. The microfiber storage
bag can be used for cleaning and polishing the body of device. Do not use
chemical or alcohol based cleansers on exterior as harsh chemicals may discolor
the metallic panels.
4. Allow device to dry completely prior to use.
Troubleshooting:
1. System is not turning on:
a. Is the device fully charged? (Power indicator light is on and solid)
b. Is the Power indicator light illuminated?
2. System is not Charging:
a. Is USB power card firmly inserted into device?
(does Power indicator light turn on?)
b. Try a different USB Power Adapter to ensure it is working properly.
c. Try a different wall outlet to determine if there is power to the outlet.
3. System shuts off abruptly, prior to completion of 3-minute treatment:
a. System is designed to shut off automatically after 3 minutes,
b. System may shut off after multiple repeated uses if the device exceeds
desired temperature. Allow device to cool for several minutes and try again.