JVC KW-R920BT User manual

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
ENGLISH
FRANÇAIS
DEUTSCH
B5A-0833-00 [E]
KW-R920BT / KW-DB92BT
CD RECEIVER
INSTRUCTION MANUAL
RÉCEPTEUR CD
MANUEL D’INSTRUCTIONS
CD-RECEIVER
BEDIENUNGSANLEITUNG
JS_JVC_KW_R920BT_DB92BT_E_C_00.indd 1JS_JVC_KW_R920BT_DB92BT_E_C_00.indd 1 2/11/2015 5:33:52 PM2/11/2015 5:33:52 PM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
i
Information on Disposal of Old Electrical and Electronic Equipment and Batteries
(applicable for countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of
handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper
recycling and waste disposal will help conserve resources whilst preventing detrimental effects
on our health and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
Information sur l’élimination des anciens équipements électriques et électroniques
et piles électriques (applicable dans les pays qui ont adopté des systèmes de collecte
sélective)
Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne
peuvent pas être éliminés comme ordures ménagères.
Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés
sur des sites capables de traiter ces produits et leurs déchets.
Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage
adapté et l’élimination des déchets aideront à conserver les ressources et à nous préserver des
leurs effets nocifs sur notre santé et sur l’environnement.
Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient
du plomb.
Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien
(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)
Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist
darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf,
sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten
und batterien abgegeben werden muss.
Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und
die Gesundheit Ihrer Mitmenschen.
Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere
Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den
kommunalen Entsorgungsbetrieben.
Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei
enthalt.
JS_JVC_KW_R920BT_DB92BT_E_C_00.indd iJS_JVC_KW_R920BT_DB92BT_E_C_00.indd i 2/11/2015 5:33:52 PM2/11/2015 5:33:52 PM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
ii
The marking of products using lasers
The label is attached to the chassis/case and says that the component uses laser beams that
have been classified as Class 1. It means that the unit is utilizing laser beams that are of a
weaker class. There is no danger of hazardous radiation outside the unit.
Marquage des produits utilisant un laser
L’étiquette est attachée au châssis/boîtier de l’appareil et indique que l’appareil utilise des
rayons laser de classe 1. Cela signifie que l’appareil utilise des rayons laser d’une classe faible. Il
n’y a pas de danger de radiation accidentelle hors de l’appareil.
Kennzeichnung von Geräten mit Laser-Abtastern
Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente
Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf
hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören.
Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche
Strahlungen außerhalb des Geräts besteht.
For Israel
JS_JVC_KW_R920BT_DB92BT_E_C_00.indd iiJS_JVC_KW_R920BT_DB92BT_E_C_00.indd ii 2/11/2015 5:33:52 PM2/11/2015 5:33:52 PM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
iii
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
Declaration of Conformity with regard to the EMC Directive
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
EU Representative:
JVC Technical Services Europe GmbH
Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany
Déclaration de conformité vis à vis de la Directive 1999/5/CE de R&TTE
Déclaration de conformité se rapportant à la directive EMC
Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU
Fabricant:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
Représentants dans l’UE:
JVC Technical Services Europe GmbH
Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany
Konformitätserklärung in Bezug auf die R&TTE-Vorschrift 1999/5/EG
Konformitätserklärung in Bezug auf die EMC-Vorschrift
Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU
Hersteller:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
EU-Vertreter:
JVC Technical Services Europe GmbH
Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany
JS_JVC_KW_R920BT_DB92BT_E_C_00.indd iiiJS_JVC_KW_R920BT_DB92BT_E_C_00.indd iii 2/11/2015 5:33:53 PM2/11/2015 5:33:53 PM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
iv
English
Hereby, JVC KENWOOD declares that this unit
KW-R920BT/KW-DB92BT is in compliance with
the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Français
Par la présente JVC KENWOOD déclare que
l’appareil KW-R920BT/KW-DB92BT est conforme
aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Par la présente, JVC KENWOOD déclare que ce
KW-R920BT/KW-DB92BT est conforme aux
exigences essentielles et aux autres dispositions de
la directive 1999/5/CE qui lui sont applicables.
Deutsch
Hiermit erklärt JVC KENWOOD, dass sich dieser
KW-R920BT/KW-DB92BT in Übereinstimmung
mit den grundlegenden Anforderungen und den
anderen relevanten Vorschriften der Richtlinie
1999/5/EG befindet. (BMWi)
Hiermit erklärt JVC KENWOOD die
Übereinstimmung des Gerätes KW-R920BT/
KW-DB92BT mit den grundlegenden
Anforderungen und den anderen relevanten
Festlegungen der Richitlinie 1999/5/EG. (Wien)
Nederlands
Hierbij verklaart JVC KENWOOD dat het toestel
KW-R920BT/KW-DB92BT in overeenstemming is
met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Bij deze verklaat JVC KENWOOD dat deze
KW-R920BT/KW-DB92BT voldoet aan de essentiële
eisen en aan de overige relevante bepalingen van
Richtlijn 1999/5/EC.
Italiano
Con la presente JVC KENWOOD dichiara che questo
KW-R920BT/KW-DB92BT è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
Español
Por medio de la presente JVC KENWOOD declara
que el KW-R920BT/KW-DB92BT cumple con
los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva
1999/5/CE.
Português
JVC KENWOOD declara que este KW-R920BT/
KW-DB92BT está conforme com os requisitos
essenciais e outras disposições da Directiva
1999/5/CE.
Polska
JVC KENWOOD niniejszym oświadcza, że
KW-R920BT/KW-DB92BT spełnia zasadnicze
wymogi oraz inne istotne postanowienia
dyrektywy 1999/5/EC.
Český
JVC KENWOOD tímto prohlašuje, že tento
KW-R920BT/KW-DB92BT je ve shodě se základními
požadavky a dalšími příslušnými ustanoveními
směrnice 1999/5/ES.
Magyar
Alulírott, JVC KENWOOD, kijelenti, hogy a jelen
KW-R920BT/KW-DB92BT megfelel az 1999/5/
EC irányelvben meghatározott alapvető
követelményeknek és egyéb vonatkozó
előírásoknak.
Svenska
Härmed intygar JVC KENWOOD att denna
KW-R920BT/KW-DB92BT stär l överensstämelse
med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv
1999/5/EG.
Suomi
JVC KENWOOD vakuuttaa täten että KW-R920BT/
KW-DB92BT tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Slovensko
S tem JVC KENWOOD izjavlja, da je ta KW-R920BT/
KW-DB92BT v skladu z osnovnimi zahtevami in
ostalimi ustreznimi predpisi Direktive 1999/5/EC.
Slovensky
Spoločnosť JVC KENWOOD týmto vyhlasuje,
že KW-R920BT/KW-DB92BT spĺňa zákldné
požiadavky a ďalšie prislušné ustanovenia
Direktĺvy 1999/5/EC.
Dansk
Undertegnede JVC KENWOOD erklærer harved,
at følgende udstyr KW-R920BT/KW-DB92BT
overholder de væsentlige krav og øvrige relevante
krav i direktiv 1999/5/EF.
Ελληνικά
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ JVC KENWOOD ΔΗΛΩΝΕΙ ΟΤΙ
KW-R920BT/KW-DB92BT ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/EK.
Eesti
Sellega kinnitab JVC KENWOOD, et see
KW-R920BT/KW-DB92BT vastab direktiivi
1999/5/EC põhilistele nõudmistele ja muudele
asjakohastele määrustele.
Latviešu
Ar šo, JVC KENWOOD, apstiprina, ka KW-R920BT/
KW-DB92BT atbilst Direktīvas 1999/5/EK
galvenajām prasībām un citiem tās nosacījumiem.
Lietuviškai
Šiuo, JVC KENWOOD, pareiškia, kad šis
KW-R920BT/KW-DB92BT atitinka pagrindinius
Direktyvos 1999/5/EB reikalavimus ir kitas svarbias
nuostatas.
Malti
Hawnhekk, JVC KENWOOD, jiddikjara li dan
KW-R920BT/KW-DB92BT jikkonforma mal-ħtiġijiet
essenzjali u ma provvedimenti oħrajn relevanti li
hemm fid-Dirrettiva 1999/5/EC.
Українська
Компанія JVC KENWOOD заявляє, що цей виріб
KW-R920BT/KW-DB92BT відповідає ключовим
вимогам та іншим пов’язаним положенням
Директиви 1999/5/EC.
Turkish
Bu vesileyle JVC KENWOOD, KW-R920BT/
KW-DB92BT ünitesinin, 1999/5/EC Direktifinin
başlıca gereksinimleri ve diğer ilgili hükümleri ile
uyumlu olduğunu beyan eder.
Русский
Настоящим, JVC КЕНВУД декларирует, что
это устройство “KW-R920BT/KW-DB92BT”
соответствует необходимым требованиям
и другим важным положениям директивы
1999/5/EC.
Україна
Цим, JVC KENWOOD декларує, що цей виріб
“KW-R920BT/KW-DB92BT” Відповідає суттєвим
вимогам та іншим відповідним пунктам
Директиви 1999/5/EC.
JS_JVC_KW_R920BT_DB92BT_E_C_00.indd ivJS_JVC_KW_R920BT_DB92BT_E_C_00.indd iv 2/11/2015 5:33:53 PM2/11/2015 5:33:53 PM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
2
CONTENTS BEFORE USE
IMPORTANT
• To ensure proper use, please read through this manual before using this product. It is especially important
that you read and observe Warning and Caution in this manual.
• Please keep the manual in a safe and accessible place for future reference.
Warning
Do not operate any function that takes your attention away from safe driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of
the output level.
General:
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded
data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short
circuit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to
evaporate.
BEFORE USE 2
BASICS 3
GETTING STARTED 4
1 Cancel the demonstration
2 Set the clock
3 Set the basic settings
DIGITAL RADIO (for KW-DB92BT )5
ANALOG RADIO 8
AUX 9
CD / USB / iPod / ANDROID 10
BLUETOOTH® 12
AUDIO SETTINGS 17
DISPLAY SETTINGS 21
REFERENCES 22
Maintenance
More information
TROUBLESHOOTING 24
SPECIFICATIONS 26
INSTALLATION /
CONNECTION 28
How to read this manual
• Operations are explained mainly using buttons on the faceplate of KW-R920BT .
• English indications are used for the purpose of explanation. You can select the display language from the
menu. (
5 )
•
[XX] indicates the selected items.
• (
XX ) indicates references are available on the stated page.
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 2JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 2 3/11/2015 8:59:58 AM3/11/2015 8:59:58 AM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
3
ENGLISH
BASICS
To On the faceplate
Turn on the power Press .
• Press and hold to turn off the power.
Adjust the volume Turn the volume knob.
Press the volume knob to mute the sound or pause playback.
• Press again to cancel.
Select a source • Press repeatedly.
• Press , then turn the volume knob within 2 seconds.
Change the display information Press repeatedly.
( 24)
DIGITAL
ST
T I
KW-DB92BT
How to reset
Press twice within 5seconds.
Volume knob
Loading slot Display window
Faceplate
JS_JVC_KW_R920BT_DB92BT_E_EN_3.indd 3JS_JVC_KW_R920BT_DB92BT_E_EN_3.indd 3 13/11/2015 4:25:26 PM13/11/2015 4:25:26 PM

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
When you turn on the power for the first time (or [ FACTORY RST ] is set to
[
YES ]), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1 Press the volume knob.
[
YES ] is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
Set the clock
1 Press and hold .
2 Turn the volume knob to select [ CLOCK ], then press the knob.
3 Turn the volume knob to select [ CLOCK SET ], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [ 24H/ 12H ], then press the knob.
6 Turn the volume knob to select [ 12 HOUR ] or [ 24 HOUR ], then press the
knob.
7 Press to exit.
To return to the previous setting item, press .
1
2
Set the basic settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
SETTINGS
BEEP
(Not applicable when 3-way crossover is selected.)
ON :Activates the keypress tone.; OFF :Deactivates.
SRC SELECT
AM
* 1 ON :Enables AM in source selection.; OFF :Disables.
AUX * 1 ON :Enables AUX in source selection.; OFF :Disables.
F/W UPDATE
SYSTEM / DAB 1 *2/ DAB 2 *2
F/W UP xxxx/
F/W UP xxxxx/
F/W UP Vxxx
YES :Starts upgrading the firmware.; NO :Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
FACTORY RST YES :Resets the settings to default (except the stored station).;
NO :Cancels.
*1
Not displayed when the corresponding source is selected.
*2
For KW-DB92BT .
3
JS_JVC_KW_R920BT_DB92BT_E_EN_3.indd 4JS_JVC_KW_R920BT_DB92BT_E_EN_3.indd 4 13/11/2015 4:25:27 PM13/11/2015 4:25:27 PM

ENGLISH 5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CLOCK
CLOCK SYNC AUTO
:The clock time is automatically set using the Clock Time (CT) data
in FM Radio Data System signal (for
KW-R920BT ) or DAB signal (for
KW-DB92BT ).; OFF :Cancels.
CLOCK DISP ON :The clock time is shown on the display even when the unit is turned
off.;
OFF :Cancels.
ENGLISH
Select the display language for menu and music information if applicable.
By default,
ENGLISH is selected.
* For
KW-R920BT .
РУССКИЙ *
ESPANOL
GETTING STARTED DIGITAL RADIO (for KW-DB92BT )
About DAB (Digital Audio Broadcasting)
DAB is one of the digital radio broadcasting systems available today. It
can deliver digital quality sound without any annoying interference or
signal distortion. Furthermore, it can carry text, pictures and data.
In contrast to FM broadcast, where each program is transmitted on its
own frequency, DAB combines several programs (called “services”) to
form one “ensemble.”
The “primary component” (main radio station) is sometimes accompanied
by a “secondary component” which can contain extra programs or other
information.
Preparation:
1 Connect a DAB antenna to the DAB antenna jack. ( 30)
2 Press DAB to select DAB directly.
3 Press and hold DAB to start the Service List update.
“DAB SORTING” appears and update starts.
Updates take up to 3 minutes. No interruption (such as traffic
information) is possible during updates.
• To cancel the Service List update: Press and hold DAB again.
JS_JVC_KW_R920BT_DB92BT_E_EN_3.indd 5JS_JVC_KW_R920BT_DB92BT_E_EN_3.indd 5 13/11/2015 4:25:27 PM13/11/2015 4:25:27 PM

6
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
DIGITAL RADIO (for KW-DB92BT )
Search for an ensemble
1 Press DAB to select DAB directly.
2 Press to search for an ensemble automatically.
(or)
Press and hold until “M” flashes, then press repeatedly to
search for an ensemble manually.
3 Press to select a service (either primary or secondary) to
listen to.
Settings in memory
You can store up to 18 services.
Store a service
While listening to a service....
Press and hold one of the number buttons (1to6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and “MEMORY” appears.
Select a stored service
Press or one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the
knob to confirm.
Select a service
1 Press DAB to enter Service Search mode.
2 Turn the volume knob to select a service, then press the knob.
To cancel the Service Search mode, press or DAB.
Select a service by name
1 Press DAB to enter Service Search mode.
2 Press to select the character to be searched for.
3 Turn the volume knob to select a service, then press the knob.
Other settings
1 Press and hold .
2 Turn the volume knob to select [ TUNER ], then press the knob.
3 Turn the volume knob to select an item ( see the following table ) ,
then press the knob.
4 Repeat step 3until the desired item is selected/activated or follow
the instructions stated on the selected item.
5 Press to exit.
To return to the previous setting item, press .
Default: XX
RADIO TIMER Turns on the radio at a specific time regardless of the current source.
1 ONCE / DAILY / WEEKLY / OFF :Select how often the timer will be turned
on.
2 FM / AM / DAB :Select the source.
3 01 to 18 (for FM)/ 01 to 06 (for AM)/ 01 to 18 (for DAB):Select the preset
station.
4 Set the activation day* and time.
“
M ” lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [
OFF ] is selected for [ AM ] in [ SRC SELECT ] after Radio Timer for AM is
selected.
( 4)
* Selectable only when [ ONCE ] or [ WEEKLY ] is selected in step 1 .
JS_JVC_KW_R920BT_DB92BT_E_EN_4.indd 6JS_JVC_KW_R920BT_DB92BT_E_EN_4.indd 6 17/11/2015 3:35:03 PM17/11/2015 3:35:03 PM

ENGLISH 7
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
DIGITAL RADIO (for KW-DB92BT )
AF SET ON :
While listening to DAB...
Automatically switch to FM broadcasting the same program if the DAB signal
becomes weak. It will switch back to DAB sound when the signal becomes
strong again.
While listening to FM...
Automatically switch to DAB source broadcasting the same program (if
available).;
OFF :Cancels.
TI SET ON :Allows the unit to temporarily switch to Traffic Information if available
(“TI” lights up).;
OFF :Cancels.
PTY SEARCH Select a PTY code(see below).
If there is a station broadcasting a program of the same PTY code as you have
selected, that station is tuned in.
PTY code : NEWS , AFFAIRS , INFO , SPORT , EDUCATE , DRAMA , CULTURE ,
SCIENCE , VARIED , POP M (music), ROCK M (music), EASY M (music),
LIGHT M (music), CLASSICS , OTHER M (music), WEATHER , FINANCE ,
CHILDREN , SOCIAL , RELIGION , PHONE IN , TRAVEL , LEISURE , JAZZ ,
COUNTRY , NATION M (music), OLDIES , FOLK M (music), DOCUMENT
DAB
ANNCMNT
TRAVEL
, WARNINGS , NEWS , WEATHER , EVENT , SPECIAL , RAD INFO ,
SPORTS , FINANCE : Turn the volume knob to make a selection, then press
the knob.
“
*
” appears in front of the activated announcement type.
Automatically switch from any source to Digital radio ensembles
broadcasting an activated announcement type.
• Multiple announcement can be activated simultaneously.
• To deactivate, press the volume knob again (“
*
” goes off).
DAB UPDATE AUTO :Automatically update the DAB Service List when the power is turned
on.;
OFF :Updates the DAB Service List by pressing and holding DAB .
PTY-STBY The unit automatically switch from any source to Digital Radio ensembles
broadcasting the selected type of program.
Program Type:
NEWS , AFFAIRS , INFO , SPORT , EDUCATE , DRAMA ,
CULTURE , SCIENCE , VARIED , POP  M (music), ROCK  M (music),
EASY  M (music), LIGHT  M (music), CLASSICS , OTHER  M (music),
WEATHER , FINANCE , CHILDREN , SOCIAL , RELIGION , PHONE IN ,
TRAVEL , LEISURE , JAZZ , COUNTRY , NATION  M (music), OLDIES ,
FOLK  M (music), DOCUMENT
OFF
:Cancels.
DAB L-BAND ON : Receives L-BAND ensemble during digital audio reception. ;
OFF : Cancels
DAB ANT PWR ON : Supplies power to the DAB antenna. ; OFF : Does not supply power.
Selects when using passive antenna without booster.
RELATED SRV ON :Enable Soft-Link function to switch to an alternative service which is
different audio program from the current audio program.;
OFF :Disable.
JS_JVC_KW_R920BT_DB92BT_E_EN_4.indd 7JS_JVC_KW_R920BT_DB92BT_E_EN_4.indd 7 17/11/2015 3:35:05 PM17/11/2015 3:35:05 PM

8
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Select a stored station
Press or one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the
knob to confirm.
Other settings
1 Press and hold .
2 Turn the volume knob to select [ TUNER ], then press the knob.
3 Turn the volume knob to select an item ( see the following table ) ,
then press the knob.
4 Repeat step 3until the desired item is selected/activated or follow
the instructions stated on the selected item.
5 Press to exit.
To return to the previous setting item, press .
Default:
XX
RADIO TIMER ( 6)
SSM SSM 01 – 06
/ SSM 07 – 12 / SSM 13 – 18 : Automatically presets up to
18 stations for FM. “SSM” stops flashing when the first 6 stations are stored.
Select
SSM 07 – 12 / SSM 13 – 18 to store the following 12 stations.
LOCAL SEEK ON :Searches only FM stations with good reception.; OFF :Cancels.
• Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
IF BAND AUTO :Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.);
WIDE :Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
ANALOG RADIO
“ST” lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1 Press repeatedly to select FM or AM.
2 Press to search for a station automatically.
(or)
Press and hold until “M” flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and “MEMORY” appears.
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 8JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 8 3/11/2015 9:00:00 AM3/11/2015 9:00:00 AM

ENGLISH 9
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
ANALOG RADIO
MONO ON :Improves the FM reception, but the stereo effect will be lost.;
OFF :Cancels.
NEWS-STBY * ON :The unit will temporarily switch to News Programme if available.;
OFF :Cancels.
REGIONAL * ON : Switches to another station only in the specific region using the “AF”
control.;
OFF :Cancels.
AF SET * ON : Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor.;
OFF : Cancels.
TI SET * ON : Allows the unit to temporarily switch to Traffic Information if
available (“TI” lights up). ;
OFF :Cancels.
For
KW-DB92BT : [ TI SET ] in AM band is for enabling traffic interruption
to DAB source only.
PTY SEARCH * Select a PTY code(see below).
If there is a station broadcasting a program of the same PTY code as you
have selected, that station is tuned in.
PTY code : NEWS , AFFAIRS , INFO , SPORT , EDUCATE , DRAMA , CULTURE , SCIENCE ,
VARIED , POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),
CLASSICS , OTHER M (music), WEATHER , FINANCE , CHILDREN , SOCIAL , RELIGION ,
PHONE IN , TRAVEL , LEISURE , JAZZ , COUNTRY , NATION M (music), OLDIES , FOLK M
(music),
DOCUMENT
* Only for FM source.
Use a portable audio player
1 Connect a portable audio player (commercially available).
2 Select [ ON ] for [ AUX ] in [ SRC SELECT ]. ( 4 )
3 Press repeatedly to select AUX.
4 Turn on the portable audio player and start playback.
Use a 3-core plug head stereo mini plug for optimum audio
output.
3.5mm stereo mini plug with “L” shaped connector
(commercially available)
Portable audio player
Auxiliary input jack
AUX
JS_JVC_KW_R920BT_DB92BT_E_EN_4.indd 9JS_JVC_KW_R920BT_DB92BT_E_EN_4.indd 9 17/11/2015 3:41:02 PM17/11/2015 3:41:02 PM

10
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CD / USB / iPod / ANDROID
To On the faceplate
Reverse / Fast-forward*3Press and hold .
Select a track/file Press .
Select a folder*4Press .
Repeat play*5Press repeatedly.
TRACK RPT / ALL RPT : Audio CD
TRACK RPT / FOLDER RPT / ALL RPT : MP3/WMA/AAC/WAV/FLAC file
ONE RPT / ALL RPT / RPT OFF : iPod or ANDROID
Random play*5Press repeatedly.
ALL RND / RND OFF : Audio CD
FOLDER RND / ALL RND / RND OFF : MP3/WMA/AAC/WAV/FLAC file
SONG RND / ALL RND / RND OFF : iPod or ANDROID
*1
Do not leave the cable inside the car when not using.
*2
When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to install the
application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting.
(
22 )
*3
For ANDROID: Applicable only when [ AUTO MODE ] is selected. ( 11 )
*4
For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ ANDROID.
*5
For iPod/ ANDROID: Applicable only when [ HEAD MODE ]/ [ AUTO MODE ] is selected. ( 11 )
Start playback
The source changes automatically and
playback starts.
CD
Eject disc Label side
USB input terminal
USB 2.0 cable
*1
(commercially available)
Micro USB 2.0 cable
*1
(commercially available)
(Accessory of the
iPod/iPhone)*
1
USB
iPod/iPhone
ANDROID*2
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 10JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 10 3/11/2015 9:00:01 AM3/11/2015 9:00:01 AM

ENGLISH 11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Select control mode
While in USB-IPOD source, press repeatedly.
HEAD MODE : Control iPod from this unit.
IPHONE MODE : Control iPod using the iPod itself. However, you can still
play/pause or file skip from this unit.
While in ANDROID source, press repeatedly.
AUTO MODE : Control Android device from this unit via JVC MUSIC PLAY
application installed in the Android device.
AUDIO MODE : Control Android device using the Android device itself via
other media player applications installed in the Android
device. However, you can still play/pause or file skip from
this unit.
Select music drive
Press repeatedly.
Stored songs in the following drive will be played back.
• Selected internal or external memory of a smartphone (Mass Storage
Class).
• Selected drive of a multiple drives device.
Select a file from a folder/list
1 Press .
2 Turn the volume knob to select a folder/list, then press the knob.
3 Turn the volume knob to select a file, then press the knob.
Quick Search
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.
– Not applicable for iPod.
Alphabet search (applicable only for iPod):
You can search for a file according to the first character.
Press or turn the volume knob quickly to select the desired
character (A to Z/ 0to9/ OTHERS).
– Select “OTHERS” if the first character is other than Ato Z, 0 to 9.
• To return to the previous setting item, press .
• To cancel, press and hold .
• For iPod, applicable only when [
HEAD MODE ] is selected.
• For ANDROID, applicable only when [
AUTO MODE ] is selected.
CD / USB / iPod / ANDROID
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 11JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 11 3/11/2015 9:00:01 AM3/11/2015 9:00:01 AM

12
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Pair and connect a Bluetooth device for the first time
1 Press to turn on the unit.
2 Search and select “JVC UNIT” on the Bluetooth device.
“BTPAIRING” flashes on the display.
• For some Bluetooth devices, you may need to enter the Personal Identification Number
(PIN) code immediately after searching.
3 Perform (A) or (B) depending on what scrolls on the display.
For some Bluetooth devices, pairing sequence may vary from the steps described below.
(A) “[Device Name]” “XXXXXX” “VOL–YES” “BACK–NO”
“XXXXXX” is a 6-digit passkey randomly generated during each pairing.
Ensure that the passkey which appears on the unit and Bluetooth device is the same.
Press the volume knob to confirm the passkey.
Operate the Bluetooth device to confirm the passkey.
(B) “[Device Name]” “VOL–YES” “BACK–NO”
Press the volume knob to start pairing.
• If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code “0000” into the
Bluetooth device.
You can change to a desired PIN code before pairing. (
16 )
• If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.
“PAIRING COMPLETED” appears when pairing is completed and “ ” will light up when the
Bluetooth connection is established.
ST
• This unit supports Secure Simple Pairing (SSP).
• Up to 10 devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if
you reset the unit. To delete the paired device,
16 , [ DELETE PAIR ].
• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at
any time.
• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the
device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more information.
BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
Adjust the microphone
angle
Secure using cord clamps
(not supplied) if necessary.
Microphone
(supplied)
Rear panel
Lights up to show the battery strength and signal strength.
*
* Functionality depends on the type of the phone used.
Microphone
input jack
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 12JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 12 3/11/2015 9:00:01 AM3/11/2015 9:00:01 AM

ENGLISH 13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Auto Pairing
When you connect the iPhone/ iPod touch/
Android device to the USB input terminal,
pairing request (via Bluetooth) is automatically
activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is
turned on.
– [
AUTO CNNT ] is set to [ ON ]. ( 16 )
– JVC MUSIC PLAY application is installed on
the Android device (
10 ) and [ AUTO MODE ] is
selected (
11 ).
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• The buttons will blink in the color you have selected in [
RING COLOR ]. (  14 )
• The unit answers the call automatically if [
AUTO ANSWER ] is set to a selected time. (  14 )
During a call:
• The buttons stop blinking and illuminate in the color you have selected in [
RING COLOR ]. (  14 )
• If you turn off the unit, the Bluetooth connection is disconnected.
To On the faceplate
First incoming call...
Answer a call Press or the volume knob.
Reject a call Press and hold or the volume knob.
End a call Press and hold or the volume knob.
BLUETOOTH®
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 13JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 13 3/11/2015 9:00:02 AM3/11/2015 9:00:02 AM

14
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
To On the faceplate
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Press or the volume knob.
Reject another incoming
call
Press and hold or the volume
knob.
While having two active calls...
End current call and
activate held call
Press and hold or the volume
knob.
Swap between the current
call and held call
Press .
Adjust the phone volume
[00] to [35] (Default: [15] )
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.
Switch between hands-free
and private talk modes
Press during a call.
• Operations may vary according to
the connected Bluetooth device.
Improve the voice quality
While talking on the phone....
1 Press and hold .
2 Turn the volume knob to select an item ( see the following table ) ,
then press the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press .
Default: XX
MIC LEVEL –10
— +10 ( –4 ):The sensitivity of the microphone increases as the
number increased.
NOISE RDCT –5 — +5 ( 0 ):Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL –5 — +5 ( 0 ):Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Make the settings for receiving a call
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected or activated.
To return to the previous setting item, press .
Default:
XX
SETTINGS
AUTO ANSWER 01 SEC
— 30 SEC :The unit answers incoming call automatically in
the selected time (in seconds).;
OFF :Cancels.
RING COLOR COLOR  01 — COLOR  49 ( COLOR 08 ): Selects the notification light
color for the buttons when there is an incoming call and during a call.;
OFF :Cancels.
BLUETOOTH®
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 14JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 14 3/11/2015 9:00:02 AM3/11/2015 9:00:02 AM

ENGLISH 15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2until the desired item is selected/activated or follow the
instructions stated on the selected item.
To return to the previous setting item, press .
RECENT CALL
(Applicable only if the phone supports PBAP)
1 Press the volume knob to select a name or a phone number.
• “<” indicates call received, “>“ indicates call made, “M” indicates call missed.
• “NO HISTORY” appears if there is no recorded call history or call number.
2 Press the volume knob to call.
PHONEBOOK
(Applicable only if the phone supports PBAP)
1 Press to select the desired letter (A to Z, 0to9, and OTHERS).
• “OTHERS” appears if the first character is other than Ato Z, 0 to 9.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• The phonebook of the connected phone is automatically transferred to the unit
when pairing.
• This unit can display only non-accent letters. (Accent letters such as “Ú” is
showns as “U”.)
DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2 Press to move the entry position.
Repeat steps
1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to control
the phone functions.
(  Make a call using voice recognition )
BLUETOOTH®
Make a call using voice recognition
1 Press and hold to activate the connected phone.
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer
to the instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function
of iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [ RECENT CALL ], [ PHONEBOOK ], or
[
DIAL NUMBER ], then press the knob.
3 Turn the volume knob to select a contact or enter a phone
number.
If a contact is selected, press the volume knob to show the
phone number.
4 Press and hold one of the number buttons (1to 6).
“MEMORY P(selected preset number)” appears when the
contact is stored.
To erase a contact from the preset memory, select [
DIAL NUMBER ] in
step 2and store a blank number.
Make a call from memory
1 Press to enter Bluetooth mode.
2 Press one of the number buttons (1to 6).
3 Press the volume knob to call.
“NO PRESET” appears if there is no contacts stored.
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 15JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 15 3/11/2015 9:00:02 AM3/11/2015 9:00:02 AM

16
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth mode settings
1 Press and hold .
2 Turn the volume knob to select [ BLUETOOTH ], then press the knob.
3 Turn the volume knob to select an item ( see the following table ) , then press
the knob.
4 Repeat step 3until the desired item is selected/activated or follow the
instructions stated on the selected item.
5 Press to exit.
To return to the previous setting item, press .
Default:
XX
PHONE *1 Selects the phone or audio device to connect or disconnect.
“” appears in front of the device name when connected.
AUDIO *1
APPLICATION *1 Shows the connected phone name using the JVC Smart Music Control * 2 app.
“” appears in front of the device name when connected.
DELETE PAIR 1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [ YES ] or [ NO ], then press the knob.
SET PINCODE
(0000)
Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
2 Press to move the entry position.
Repeat steps
1 and 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
AUTO CNNCT ON :The unit automatically reconnect when the last connected Bluetooth device is
within range.;
OFF :Cancels.
AUTO PAIR ON :The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/
Android device) when it is connected through USB input terminal.Depending on the
operating system of the connected device, this function may not work. ;
OFF :Cancels.
INITIALIZE YES :Initializes all the Bluetooth settings (including stored pairing, phonebook, and
etc.).;
NO :Cancels.
INFORMATION MY  BT  NAME : Displays the unit name (JVCUNIT).;
MY  ADDRESS : Shows address of this unit.
*1
You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time.
*2
JVC Smart Music Control is designed to view JVC car receiver status and perform simple control
operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website: <http://www.jvc.net/cs/car/>.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile
between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
“BLUETOOTH” “CHECK MODE” appears. “SEARCH NOW
USING PHONE” “PIN IS 0000” scrolls on the display.
2 Search and select “JVC UNIT” on the Bluetooth device
within 3minutes.
3 Perform (A), (B) or (C) depending on what appears on the
display.
(A) “PAIRING” “XXXXXX” (6-digit passkey): Ensure that
the same passkey appears on the unit and Bluetooth
device, then operate the Bluetooth device to confirm the
passkey.
(B) “PAIRING” “PIN IS 0000”: Enter “0000” on the
Bluetooth device.
(C) “PAIRING”: Operate the Bluetooth device to confirm
pairing.
After pairing is successful, “PAIRING OK” “[Device Name]”
appears and Bluetooth compatibility check starts.
If “CONNECT NOW USING PHONE” appears, operate the
Bluetooth device to allow phonebook access to continue.
“TESTING” flashes on the display.
The connectivity result flashes on the display.
“PAIRING OK” and/or “H.FREE OK”*1and/or “A.STREAM OK”*2
and/or “PBAP OK”*3: Compatible
*1
Compatible with Hands-Free Profile (HFP)
*2
Compatible with Advanced Audio Distribution Profile (A2DP)
*3
Compatible with Phonebook Access profile (PBAP)
After 30 seconds, “PAIRING DELETED” appears to indicate that
pairing has been deleted, and the unit exits check mode.
• To cancel, press and hold to turn off the power,
then turn on the power again.
BLUETOOTH®
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 16JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 16 3/11/2015 9:00:02 AM3/11/2015 9:00:02 AM