JVC LT-55C860 User manual

• DonotconnecttheTVtothemainssupplyuntilyouhavecompletedalltheconnections.
• AlwaysdisconnecttheTVfromthemainssocketwhennotinuseforalongperiodoftime.
• The buttonontheremotecontrolisonlyusedforswitchingtheTVintostandby,itdoesnotdisconnecttheTVfromthemainspower.
Tocompletelydisconnectthemainspower,pleaseremovethemainsplugfromthemainssocket.
TheLCDdisplayisveryfragile,andmustbeprotectedatalltimeswheninstallingandremovingthebasestand.Besurethatnohardorsharpobject,
oranythingthatcouldscratchordamagetheLCDdisplay,comesintocontactwithit.DONOTexertpressureonthefrontoftheTVatanytimebecause
thescreencouldcrack.
PleaseinspectyourTVfordamageafterunpacking.Ifyoudonoticeanydamagepleaseconsultyourdealer.
Removeallpackagingfromtheunit.Retainthepackaging.Ifyoudisposeofitpleasedosoaccordingtoanylocalregulations.
 TV
 TVFeet(LeftandRight)
 Screwsx6
 RemoteControl/
AAABatteriesx2
 InstructionManual
 QuickStartGuide
Unpacking
1
1. ConnectoneendoftheRFcoaxialcable
totheaerialsocketonthewallandthe
otherendofthecabletotheANTsocket
onthebackofyourTV.
2. PlugtheTVintoamainssocketand
switchonatthemains.
3. Instandbymode,pressthe buttonon
theremotecontroltoturntheTVon.The
LEDindicatorwillflashforafewseconds
thentheTVwillswitchon.
Connecting the Aerial and Turning on the TV
4
Installing the Stand
3
1. Slideopenthebatterycompartmentonthebackoftheremotecontrol.
Operating Your Remote Control
2
Thank youforpurchasingyournewJVCTV.
YournewTVincorporatesthelatesttechnologytoenhanceyourviewing
experience.Wewouldsuggestthatyouallowabout20minsforinitialsetup.
Pleasefollowthisguideforasuccessfulrsttimeinstallation.
Thelatesteco-friendlypower-savingtechnologywillswitchotheTVif
itisleftonandidlefor4hours.Pleasereferto“AutoStandby”underthe
“TimeSettings”sectionoftheinstructionmanualformoredetail.
Quick Start Guide
55" LED Smart 4K Ultra HD TV
LT-55C860
2. InserttwoAAAsizebatteries.Makesuretomatchthe(+)and(-)
endsofthebatterieswiththe(+)and(-)endsindicatedinthebattery
compartment.
3. Slidethebatterycompartmentcoverbackintoplace.Makesureitclicks
intoplace.
Optional
Ifyouwanttoconnecttotheinternetviaawiredconnectionthen
connectyourethernetcabletotheLANsocket.
Fitting the Feet
1. EnsuretheTVisswitchedoffandnot
connectedtothemainspowersupply.
2. LaytheTVdownonaflatsurfaceideally
ontheedgeofatablesothebaseofthe
TVslightlyoverhangstheedgeofthetable,
withthebacksidefacingup.Pleasemake
sureasoftcushionedmaterial(suchasadry
bathtowelorthickpieceoffoam)isplaced
beneaththescreen.
3. Positiontheeachfootontothebackofthe
stand.TheyaremarkedLeftandRightonthe
backofeachfoot.Makesureyouslidethelug
undertherecess.
4. Using3ofthesuppliedscrews,toscreweach
footontotheTV.
Table
Cushioned
material
RightfootLeftfoot
RF coaxial cable
(not included)
LT-55C860_QSG.indd 1 01/08/2016 15:12

Well done,yournewTVisnowreadytouse.Youwillndthattherearemanyexcitingfeaturesavailable.Togettoknowallthesefeatures,pleasetake
sometimetoreadtheinstructionmanualprovidedwithyourTV.
(QSG-LT-55C860-160801V1)
Need More Help!
IfyouneedmorehelpsettingupyourTVthenpleasecall:
UK: 0344 561 1234
Ireland: 1890 818 575
Linesareopen24/7
1. ThefirsttimeyouturntheTVon,itwillgostraightintotheFirst Time Installationmenu.
Pleaseensuretheaerialispluggedin.Pressthe buttonstohighlightyourlanguage
thenpressOK.
Getting Started
Connecting to the Internet
5
6
Allofthesettingon'Firsttimeinstallations'menuarepresetforthemajorityofcustomersin
theUK,ifyouwishyoucanchangethesettingbyselectingeachsettingandpressingthe
buttons.
If youView TV Through a Set Top Box
IfyouhaveattachedaSettopboxsuchasSky/VirginorBTviaaHDMIcableselectDigitalAerial
toNO.ThiswillmeanyourTVwillnottrytotuneanychannelsin.Toviewyoursettopboxpress
theSOURCEbuttonandselecttheHDMIsocketyouhaveattachedyoursettopboxto.
2. ConfirmthesesettingsbypressingOK.
3. Pressthe  buttonstohighlight
HomeModethenpressOK.
4. Toaccessallthefeaturesofyour
SmartTVyoumustbeconnectedto
theinternet.Ifyoudonotwishto
setupyournetworkconnectionyou
canskipthissectionbyselectingNO,
howeverwerecommendyousetup
yournetworkconnectionnow.
5. SelectYesandPressOK.
ToaccessallthefeaturesofyourSmartTVyoumustbeconnectedtotheinternet.Ifyoudonot
wishtosetupyournetworkconnectionyoucanskipthissectionbypressing ,howeverwe
recommendyousetupyournetworkconnectionnow.
WIRED Connection
• IfyouhaveconnectedyourethernetcabletotheLANsocketonthebackofyourTVpress
the  buttonstoselectWIREDDEVICE.WhenNetworksaysCONNECTEDpressOK.
WIRELESS Connection
Youcanconnectusingawireless
connectionviayourrouter.
1. Pressthe  buttonstoselectWIRELESSDEVICE.Waitafewsecondsandalistofall
wirelessnetworkswillbedisplayed.
2. Pressthe  buttonstoselectyourwirelessnetworkthenpressOK.
3. Younowneedtoenteryourpassword,akeyboardwillappear.Pressthe    buttons
toselectaletter/number/symbolandpressOKtoentereachone.Onceyouhavetyped
yourpasswordhighlightOKandpressOK.ThenetworkwillnowshowConnected.
4. PresstheOKbuttontocontinue.
Tuning in Your TV
7
Choose Region (UK only)
Duringtuning,yourTVmayhavereceivedsignalsfrommorethanonetransmitter.IfthishasoccurredtheChooseRegionscreenwillbedisplayed.Thiswill
enableyoutoselectthecorrectregionaltransmissionforthelocalnewsservicethatyourequire.
1. Pressthe buttontohighlightPrimary region,thenpressthe  buttonsto
selectyourPrimaryRegione.g.England.
2. Pressthe buttontohighlightSecondary region,thenpressthe  
buttonstoselectyourSecondaryRegione.g.London.
3. Pressthe buttontohighlightTertiary region,thenpressthe  buttonsto
selectyourTertiaryRegione.g.GreaterLondon.
• TomakesureyouactivateFreeviewPlayselectYESandpressOK.
4. Pressthe buttontohighlightSavethenpressOK.
5. TheScanstatisticsscreenwillappear,showingyoutheamountofTVandradio
stationsthathavebeentunedin.PressOKtoexitthisscreen.
6. TheEditChannellistwillappear,presstheEXITbuttontoremovethis.YourTV
isnowfullytunedinandreadytouse.
ToenjoyFreeviewPlayyourTVmustbeconnectedtotheinternet.
YourTVwillnowstartautomaticchannelscan.ItwilltuneinallavailableTVchannels.
MakesureyourTVisasclosetoyourrouteras
possible,within5manditsrecommendeditsinthe
sameroomastheTV.
LT-55C860_QSG.indd 2 01/08/2016 15:12