JVC KV-M65 User manual

KV-M65 (EN)
TQBX0223[J]
ENGLISH
ESPAÑOLFRANÇAIS
KV-M65
Display unit
Unided de visualización
Unité d’affichange
Controller unit
Unidad controladora
Unité de commande
KV-M65 MOBHE COLOR SYSTEMMOBHE COLOR SYSTEM KV-M65 MOBILE COLOR MONITOR SYSTEM
For installation and connections, refer to the
separate manual.
Para realizar la instalación y las conexiones,
consulte el manual separado.
Pour l’installation et les raccordements, se
référer au manuel séparé.
TQBX0223
[J]
For customer Use:
Enter below the serial No. which is
located on the rear of cabinet. Retain
this information for future reference.
Model No. KV-M65
Serial No.
This system cannot receive television broadcasts and is primarily
designed for use with a VCR. Use the separately sold mobile TV tuner
system KV-C1 for optional television broadcast reception.
Este sistema no puede recibir emisiones de televisión, y ha sido
diseñado principalmente para ser utilizado con una videograbadora.
Utilice el sistema de sintonizador de TV móvil KV-C1 vendido por
separado para reciber emisiones de televisión opcionales.
Ce système ne peut recevoir les emissions de télévision, et il est
essentiellement conçu pour l’utilisation avec un magnétoscope.
Utilisez le tuner avec système de tuner TV mobile KV-C1 vendu
séparément pour la réception optionnelle des émissions de télévision.
*
*
*
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
MOBILE COLOR MONITOR SYSTEM
SISTEMA DE MONITOR EN COLOR MÓVIL
SYSTÈME DE MONITEUR MOBILE EN COULEUR

2
KV-M65 (EN)
TQBX0223[J]
Warnings
• DO NOT INSTALL THE MONITOR IN A LOCATION
WHICH OBSTRUCTS DRIVING, VISIBILITY OR
WHICH IS PROHIBITED BY APPLICABLE LAWS
AND REGULATIONS.
• THERE MAY BE LEGAL REGULATIONS DEFIN-
ING THE PERMISSIBLE INSTALLATION LOCA-
TIONS FOR THE DISPLAY UNIT WHICH DIFFER
BY COUNTRY OR BY STATE, BE SURE TO
INSTALL THE DISPLAY UNIT IN A CORRECT
LOCATION ACCORDING TO SUCH LAWS.
• DO NOT INSTALL THE MONITOR SYSTEM IN A
LOCATION WHICH OBSTRUCTS THE OPERA-
TION OF AN AIR BAG.
• THE DRIVER MUST NOT OPERATE THE COLOR
MONITOR SYSTEM WHILE DRIVING.
OPERATING THE COLOR MONITOR SYSTEM
WHILE DRIVING MAY LEAD TO CARELESSNESS
AND CAUSE AN ACCIDENT.
* STOP YOUR VEHICLE IN A SAFE LOCATION WHEN
OPERATING THE TV TUNER SYSTEM.
• THE DRIVER MUST NOT WATCH THE TELEVI-
SION OR VIDEOS WHILE DRIVING.
IF THE DRIVER WATCHES THE TELEVISION OR
A VIDEO WHILE DRIVING, IT MAY LEAD TO
CARELESSNESS AND CAUSE AN ACCIDENT.
CAUTIONS
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
CAUTION:
This monitor system should be used with DC 12V only.
To prevent electric shocks and fire hazards, DO NOT use
any other power source.
This Class B digital apparatus meets all requirements of the
Canadian Interference–Causing Equipment Regulations.
“Cet appareil numérique de la classe B respecte toutes les
exigencesduRèglementsurlematérielbrouilleurduCanada.”
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
Safety points (Be sure to follow these points)

3
KV-M65 (EN)
TQBX0223[J]
ENGLISH
ESPAÑOLFRANÇAIS
• WHEN LIGHTNING OCCURS, DO NOT TOUCH
THE ANTENNA WIRE OR THE TELEVISION.
TOUCHING THE ANTENNA WIRE OR THE TELEVI-
SION UNDER SUCH CONDITIONS MAY CAUSE
ELECTROCUTION.
• KEEP THE MONITOR SYSTEM AT AN APPRO-
PRIATE SOUND LEVEL WHILE DRIVING.
DRIVING WITH THE SOUND AT A LEVEL THAT
PREVENTS YOU FROM HEARING SOUNDS
OUTSIDE OF AND AROUND THE VEHICLE MAY
CAUSE AN ACCIDENT.
• ASK A TRAINED TECHNICIAN TO INSTALL THE
MONITOR SYSTEM.
INSTALLATION AND WIRING REQUIRE TRAINING
AND EXPERIENCE.
* TO BE SAFE, ASK THE SALES OUTLET WHERE
YOU PURCHASED THE MONITOR SYSTEM TO
PERFORM THE INSTALLATION.
• DO NOT LET THE MONITOR SYSTEM FALL OR
BE STRONGLY IMPACTED.
BE SURE TO NOT LET THE MONITOR SYSTEM
FALL OR BE STRONGLY IMPACTED SINCE THIS
MAY CAUSE A MALFUNCTION OR FIRE.
• DO NOT WATCH THE MONITOR WITH THE
ENGINE OFF.
WATCHING THE MONITOR WITH THE ENGINE OFF
WILL CONSUME BATTERY POWER AND MAY
PREVENT THE ENGINE FROM STARTING.
CAUTION :
Changeor modificationsnot approvedbyJVC couldvoid
user's authority to operate the equipment. This equip-
ment has been tested and found to comply with the lim-
its for a Class B digital device, pursuant to Part
15 of the
FCC Rules. These limits are designed to provide rea-
sonableprotectionagainst harmfulinterference ina resi-
dentialinstallation.Thisequipmentgenerates, uses,and
can radiate radio frequency energy and, if not installed
andusedin accordancewith theinstructions, maycause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.

4
KV-M65 (EN)
TQBX0223[J]
• Do not leave the liquid crystal panel surface
facing upwards on top of the dashboard.
(storage temperature range: –20 °C to +80 °C
(–4 °F to +176 °F) )
Cautions for the liquid crystal panel
• Do not strongly impact the liquid crystal panel.
• There are red spots, blue spots and green
spots on the panel surface. This is a charac-
teristic of liquid crystal panels and is not a
problem.
The liquid crystal panel is built with very high
precision technology and has at least 99.99%
effective image pixels. Be aware that on
0.01% of the panel there may be missing
pixels or constantly light pixels.
• When the temperature is very cold or very hot,
the image may not appear clearly or may
move slowly.
Also, movement of the image may seem to be
out of sync or the image quality may decline in
such environments. Note that this is not a
malfunction or problem.
(usage temperature range: 0 °C to +40 °C (32
°F to 104 °F) )
40 °C (104 °F) or hotter
0 °C (32 °F) or colder
During the summer,
temperatures can
reach as high as
100 °C (212 °F).
+80°C
–20
–20°C to +80°C
Spots
When the liquid crystal panel reaches high
temperatures or low temperatures, chemical
changes occur within the liquid crystal panel
which may cause malfunctions.

5
KV-M65 (EN)
TQBX0223[J]
ENGLISH
ESPAÑOLFRANÇAIS
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the
unit.
Table of Contents
Introduction to the Roles of the System Components ................6
How to Use the Monitor System
Controlling the Sound .................................................................9
Adjusting Brightness .................................................................12
Adjusting the Sound..................................................................16
Adjusting the Image..................................................................18
Connecting to External Devices................................................20
How to Best Use the Monitor System
Troubleshooting ........................................................................21
Maintenance .............................................................................22
Specifications............................................................................23

6
KV-M65 (EN)
TQBX0223[J]
Introduction to the Roles of the System
Components
Controller unit
POWER
DISPLAY UNIT
VIDEO VIDEO
VIDEO
L-AUDIO-R
L-AUDIO-R
AV INPUT 1
AV INPUT 2 L-AUDIO-R
AV
OUTPUT
Terminal for connecting a 2nd
monitor or car stereo audio
output
Terminal for connecting the power cord
Terminal for connecting to the KV-M65 display unit
Terminal for connecting a mobile video
machine, video camera or other device
Not used at present
Terminal for connecting a mobile video
machine, video camera or other device

7
KV-M65 (EN)
TQBX0223[J]
ENGLISH
ESPAÑOLFRANÇAIS
Introduction to the Roles of the System Components (continued)
KV-M65 display unit
POWER MODE MENU
Used to display, select and determine the various adjustments
(screen, menu).
Used to turn the power
source ON and OFF
Normally:
Changing the channel setting in the
upward or downward direction
(only when connected to the KV-C1)
When setting various menus:
Menu selection
When setting various adjustment modes:
Adjustment and switching
Used to display the configuration screen for changing the input source and the various function menus.
When set to the TV mode, channel numbers are shown. Note, however, that television broad-
cast reception requires connection to the separately sold KV-C1 mobile TV tuner system.
KV-M65 MOBHE COLOR SYSTEMMOBHE COLOR SYSTEM KV-M65 MOBILE COLOR MONITOR SYSTEM
Dimmer sensor
This sensor automatically adjusts the screen brightness. (When
Auto Mode is set for the Dimmer Setting, the screen brightness is
automatically adjusted to one of 12 levels to suit the surrounding
brightness.)
Remote sensor
Used when the JVC mobile TV tuner
system KV-C1 is connected
STAND BY (R), ON (G)
When the power is off ... red
When the power is on ... green
Speaker
(on the back side)
Screw holes are provided for attaching the monitor
stand (on the bottom side).
(1/4 inch unify screw, maximum length of 4.5 mm)
Terminal for connecting
the cable from the
controller unit (on the
right side)
The numbers in the circles ( )
indicate the page on which an
explanation is provided in this manual.

8
KV-M65 (EN)
TQBX0223[J]
When pressed for 2 seconds or longer: The setting screens for various functions can be
displayed.
When pressed for 2 seconds or longer:The menus for image and sound can be displayed.
When setting the menus: The Menu selection and adjustment can be decided.
8
RGB VIDEO 1 VIDEO 2
Television channel number
SPEAKER M ODE
VIDEO
M ODE
DI
MM ER M ODE
END
M OVE
CURSOR SELECT
M ENU
[ SPEAKER M ODE ]
STANDARD
NAVIGATION
M UTE
ENTERSELECT
M ENU
[ RGB MODE ]
NAVIGATION
NO CONNECT
ENTERSELECT
M ENU
[ DI MM ER M ODE ]
AUTO
M ANUAL
ENTERSELECT
M ENU
9 to 11
12 to 15
VOLU M E
30
[CH M ODE]
AUTO M ANUAL
BRIGHT
-10
BLACK BASS
CONT TREBLE
COLOR BALANCE
TINT SURROUND
END
M OVE
CURSOR SELECT
M ENU
18, 19 16, 17
*
MENU button
When pressed for less than 2 seconds: The adjustment screen display can be selected.
(The following diagram shows an example for the Speaker Output Setting on All Modes
and the Dimmer Setting on Auto Mode.)
MODE button
When pressed for less than 2 seconds: The input source can be changed.
* Displayed only when VIDEO1
or VIDEO2 is selected.

9
KV-M65 (EN)
TQBX0223[J]
ENGLISH
ESPAÑOLFRANÇAIS
Controlling the Sound
Selecting the volume of the built-in speakers
(The monitor system is set to STANDARD at the time of shipment from the factory.)
Press the MODE button for 2 seconds or longer.
Select the SPEAKER MODE.
Press the MENU button.
Note
• If no operations are performed for a period of 30 seconds after pressing the MODE button:
The Menu configuration screen automatically disappears.
SPEAKER M ODE
VIDEO
M ODE
DI
MM ER M ODE
END
M OVE
CURSOR SELECT
M ENU
MODE
SPEAKER M ODE
VIDEO
M ODE
DI
MM ER M ODE
END
M OVE
CURSOR SELECT
M ENU
[ SPEAKER M ODE ]
STANDARD
NAVIGATION
M UTE
ENTERSELECT
M ENU
MENU
POWER MODE MENUPOWER MODE MENU

10
KV-M65 (EN)
TQBX0223[J]
Select STANDARD.
After the SPEAKER MODE screen disappears (occurs af-
ter about 10 seconds), press the MENU button for less
than 2 seconds and show the speaker volume level dis-
play.
Adjust the speaker volume level.
Note
• Relationship between the Speaker mode setting and the built-in speaker volume
Built-in speaker volume
Speaker mode setting Television RGB Video 1 Video 2
STANDARD Television sound – Video 1 sound Video 2 sound
NAVIGATION Not used at present. Please select either STANDARD or MUTE.
MUTE There is no sound output from the speakers
• Speaker output is monaural sound. (It is not heard as stereo sound.)
Sound level (0-60 levels)
[ SPEAKER M ODE ]
STANDARD
NAVIGATION
M UTE
ENTERSELECT
M ENU
VOLU M E
30
VOLU M E
30
MENU
POWER MODE MENUPOWER MODE MENU