JVC KY-PZ510NW User manual

1
Instruction Manual
Update Firmware v2.0.92
April2023
4K PTZ REMOTE CAMERA (NDI|HX)
KY-PZ510NW/NB
JVCKENWOOD Corporation
Global Marketing Group
Marketing Department
Media Business Division
H.265/
HEVC
Note
・ v2.0.92 is for KY-PZ510 series.
・ If you update KY-PZ510NW/KY-PZ510NB
with v2.0.92, you can use NDI|HX3.

2
Firmware v2.0.92
2. Firmware v2.0.92
When you update KY-PZ510 series you can confirm firmware version on the View Remote Screen..
1. Instruction manual
http://www32.jvckenwood.com/jvc/manual_e/index.asp
This manual is for Firmware v2.0.92.
Also please refer to original KY-PZ510 series instruction manual.

3
Firmware v2.0.92
3. NDI®|HX3 only for KY-PZ510NW/KY-PZ510NB.
When you update KY-PZ510NW/KY-PZ510NB, you can select N I|HX3. Please select Recommended.①
When you set 29.97p 30p 59.94p 60p 59.94i 60i on Video Format ②
You can select NDI|HX3:H.264 1080@60 1080/60p NDI streaming. ③
or
You can select NDI|HX3:H.265 1080@60 1080/60p NDI streaming. ④
②
③
When you set 25p, 50p, 50i on Video Format,⑤
You can select NDI|HX3:H.264 1080@50, 1080/50p NDI streaming. ⑥
or
You can select NDI|HX3:H.265 1080@50, 1080/50p NDI streaming. ⑦
④
⑤
⑥
①
①
⑦
Note
・Automatically configures appropriate settings for First stream and Second stream.
・The bit rate will be high. Please check your network bandwidth.
・Some decoders are not supported.
・Format is 1080p only.

4
Firmware v2.0.92
4. NDI Settings menu only for KY-PZ510NB/KY-PZ510NB.
・NDI Local Device Channel Sets the channel name to be set for the NDI device name.
[Default︓NDI HX3 （Up to 13 characters）]
・NDI Discovery Server Set when using NDI discovery server. [Setting︓●off on]
・NDI Discovery Server Address IP address of NDI Discovery Server [Default : 192.168.1.2]
・NDI Multicast Sever Set when using Multicast. [Setting︓●off on]
・NDI Multicast Sever Address IP address for Multicast. [Default︓239.255.0.10
（239.255.0.0〜239.255.255.255）]
・NDI Multicast Mask Netmask setting [Default : 239.255.0.0]
・NDI Multicast TTL Setting of Multicast TTL(Time to Live) [Default :1 （1〜255）]
Note
・The NDI multicast address and NDI multicast mask set the range of multicast addresses that are randomly set
when performing NDI multicast distribution.
・Example: If the NDI multicast address is set to 239.255.0.10 (Default) and
the NDI multicast mask is set to 255.255.0.0 (Default),
multicast addresses for video and audio will be randomly selected
from the range of 239.255.0.0 to 239.255.255.255.

6
History
April 2023 Release this instruction manual.