JVC TK-AM200U - Active Movement Color Dome... User manual

ACTIVE MOVEMENT COLOR CAMERA
TK-AM200U
(AC 24 V)
Compact, Durable, Wide Angle Color Camera for
CCTV Surveillance Applications with Direct Drive
Motor Panning and Tilting
R
䡲1/4" IT CCD 380,000 Pixels
䡲Fixed Lens (f=2.2 mm)
䡲Sensitivity: 4 lux with Cover
1.5 lux without Cover
䡲 Direct Drive Motor for Pan and Tilt
䡲 Maximum Panning and Tilting Speed:
120 Degrees/sec.
䡲 The Range of Panning and Tilting:
Total 60 Degrees with Coverage Over an Angle of
145 Degrees (Pan) and 125 Degrees (Tilt)
䡲 16 Preset Positions
䡲 Built-in Menu
䡲 2x Electronic Zoom
䡲 Auto Patrol Mode
䡲 Programmable Backlight Compensation
䡲 Panic Alarm
䡲 Control Signals: RS-232C, RS-422A or RS-485
䡲 Compact, Durable Design
CCTV Camera

Compact, Quiet Dome
Surveillance Camera for
Stand-alone or System
Installation
Engineered and built for operation in challenging real-world
environments, the TK-AM200U brings together JVC’s
advanced video technologies and surveillance system
expertise. Installed alone or as part of an expandable,
integrated system, the low-maintenance TK-AM200U
provides exceptional coverage. Designed for ease-of-
installation and operation, it features a wide-aperture,
wide angle (145 degrees panning angle) lens.
A 1/4-inch CCD packs 380,000 pixels for 470 TV Lines
of horizontal resolution at light levels as low as 1.5 lux
(cover not fitted). An ingenious direct drive motor
ensures fast, quiet panning and tilting with low
power consumption. Cost-effective and powerful,
the TK-AM200U is the ideal solution for a wide
range of surveillance applications.
Direct Drive Motor for
Pan and Tilt
Panic Alarm
2X Electronic Zoom

䡲High-resolution and sensitivity to 1.5 lux
with 440,000 pixels
The TK-AM200U has an advanced
1/4-inch CCD with 380,000 pixels,
providing 470 TV Lines of horizontal
resolution. Exceptional sensitivity means
the TK-AM200U achieves excellent
picture quality at ambient light levels as
low as 4 lux with cover on and 1.5 lux
with cover removed.
䡲Auto Patrol Mode
The TK-AM200U features a powerful Auto
Patrol Mode, for use with the RM-P2580
CCTV system remote controller, which
provides one Preset Sequence Mode
(Auto Patrol) setting and 16 Presets for
surveillance coverage of a designated
area by random or sequential panning.
That means you can set up high-speed
camera movements between multiple
preset positions in the sequence and the
time intervals that are suitable for your
application.
䡲Panic Alarm
You can interlock operation of the
TK-AM200U with peripheral alarm
equipment via Data I/O terminals. With
the Alarm Priority mode selected, the
RM-P2580 interrupts the programmed
operation automatically and the scene for
which the alarm signal is received is
captured by the camera.
䡲2x Electronic Zoom
With an integrated large-aperture 2x
electronic zoom lens, the TK-AM200U
lets you focus on the action.
䡲Electronic Shutter
The TK-AM200U has a precision-
engineered electronic shutter with a
selectable shutter speed of 1/50 and
1/60 sec., which reduces flicker caused
by fluorescent lighting in areas where the
commercial power supply frequency is
50 Hz.
䡲TTL Auto White Balance
The TK-AM200U features JVC’s TTL
Auto White Balance (ATW), which
automatically adjusts for light within a
color temperature range from 2,500K to
8,000K. Manual adjustment is also
possible for special operating conditions.
䡲Wide Viewing Angle
The TK-AM200U features seamless
60 degrees panning and 60 degrees
tilting with coverage over an angle of
145 degrees (panning) and 125 degrees
(tilting). Maximum panning and tilting
speed is 120 degrees per second for
tracking fast-moving subjects.
䡲Menu-driven Parameter Settings
Simple menu-driven operations let you
set key parameters including AV/PEAK
level, Color level, Enhance level,
W.Balance, AGC level, and L.L. phase.
䡲DIP SW settings
The location of DIP Switch is as follows:
䡲RS-232C, RS-422A and RS-485 Interface
The TK-AM200U comes with an RS-232C
and RS-422A terminal to control external
components. The unit’s RS-485
connection allows cascaded connection
of cameras.
䡲Backlight Compensation
Backlight Compensation delivers a
realistic sense of depth around a subject
in the foreground by filling the
background, which prevents silhouetting.
CCTV Camera
ETUP MENUS
POS I I ON SETUP . .T
CAME A . .R
CONT OL UN I T . .R
SETUP MENU
ETUP MENUS
CAME A MODE SELECTR
CAME A V I DEO ADJUSR
V I DE ADJ FOR POS 1O
TEXT EDIT..
AUTO PATROL SET..
AUTO PAN SET..
PANI ALARM SET..C
FACT RY SETTING..O
..
T..
..
CAMERA SETUP MENU
DJUSTAM,E R A V I D E O AC
AGC ODE 10dB
OFF
1/50
M
SUP AGCRE
SHUT ER SPEEDTHIGH
HIGH
ENHA CEN
V.PH SE 127
UP - L
DOUB L E
A
POS . .XT LOCET
ALM. EXT SIZET
BLC D I 1. .E
BLC D I 2. .EAV/PCKE
COLO LEVELR
AWC DJ US T . .A
CAMERA MODE SELECT CAMERA VIDEO ADJUST
OFF
BLC ODEMATW
W.BA ANCEL127
RB G I NA127
MB G I NA
UTO PATROLA
30sec
PATR L1 HOMEO30sec
PATR L2 POS 1O30sec
PATR L3 POS 2O30sec
PATR L4 POS 3O30sec
PATR L5 POS 4O30sec
PATR L6 POS 5O30sec
PATR L7 POS 6O30sec
PATR L8 POS7O
FWD/ WD> ZOOMB
VIDEO ADJUST FOR POSI AUTO PATROL
OR POS IIDEO ADJUST FV
CAME A MODE SELECTR..
OFF
Light
metering
area
Light
metering
area
Light
metering
area
Light
metering
area
Light
metering
area
AREA 1 AREA 2 AREA 3 AREA 4
EDIT 1 EDIT 1 EDIT 2 EDIT 2
Light
metering
area
Light
metering
area
Alarm Signal
Auto Panning
Alarm Preset
Shooting
Panning Direction
Tilting Direction
85°
85°
60°
60°
65°
65°
䡲Stand-Alone Alarm Shooting
(without Remote Control Unit)
TK-AM200U can receive one
alarm signal directly, then an alarm
signal received. It shoots alarm
preset position. The alarm position
can be set by PC with sample
software (no warranty).
䡲Suitable for a variety of entrance
surveillance facilities.
RS-232C M.DROP SIMPLEX ON LL
1234
5678
NOT USED
MACHINE ID
X10 X1
REMOTE
SYNC
INTOFFDUPLEXP.TO P.RS-422A
RS-485
RX
TERM
PROTOCOL
SEE INSTRUCTION MANUAL

R
JVC PROFESSIONAL PRODUCTS COMPANY
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road, Wayne, N.J. 07470
TEL: [phone]
FAX: [phone]
E-mail: [email protected]
JVC CANADA INC.
21 Finchdene Square, Scarborough, Ontario M1X 1A7
TEL: [phone] FAX: [phone]
Internet Web Site http://www.jvcpro.com/
DISTRIBUTED BY Design and specifications subject to change without notice.
Printed in Japan
KCN-1777
CETKAM200UKN2000.4
This catalog is printed on recycled paper.
Specifications
 CAMERA
Signal system NTSC
Image device 1/4"IT CCD
Effective picture element NTSC: 380,000 pixels, 768 (H) x 494 (V)
Sync system Line lock/Internal
Video S/N 50 dB (typical)
Horizontal resolution 470 TV lines (typical)
Minimum illumination 4 lux (Full wide angle, AGC 20 dB,
Y: 25% with cover)
Camera ID 16 characters
White balance ATW/MANUAL/AWC
BLC Available by adjustment of light
metering area position
 LENS
Focal length f = 2.2 mm
Max. aperture ratio F1.0
 MOVING MECHANISM
Panning ±30° from original axis
Panning speed 2°/s, 4°/s, 6°/s, 12°/s, 20°/s, 40°/s,
60°/s, 80°/s (in manual mode)
4°/s (AUTO PAN mode)
120°/s (Preset maximum)
Tilting 0° to 60° (from down to horizontal
direction)
Tilting speed 2°/s, 4°/s, 6°/s, 12°/s, 20°/s, 40°/s,
60°/s, 80°/s (in manual mode)
120°/s (Preset maximum)
 GENERAL
Remote control input RS-232C, RS-422A or RS-485
Power requirement AC 24 V, 50/60 Hz
Power consumption 570 mA
Operating temperature range 14°F to 122°F /-10°C to +50°C
(recommendation: 32°F to 104°F/
0°C to +40°C)
Dimensions Approx. ø4-3/8 x 5-3/8 inches
Weight
Approx. 1.8 lbs/0.8 kg with ceiling mount
Controls, connectors and indicators
Dimensions Unit: inches (mm)
Basic system
5-3/8 (135)
1-1/16 (26)
1/16 (1)
φ4-3/8 (φ110)
φ3 (φ75)
Terminal
qControl signal selector switch
wSystem setting switches
eFOR SERVICE connector
rCamera ID setting switches
tCamera body mounting guides
yAC 24V input terminals
uControl signal connection
terminals
iPanic Alarm signal input
terminal
oCamera body clamp
!0 Drop prevention wire hook
!1 Video input terminal
!2 Terminal board
!3 Mounting holes (x4)
!4 Camera body mounting guides
(x3)
!5 Camera positioning alignment
mark
!6 Camera direction alignment
mark
!7 Drop prevention wire hook
VCR
MONITOR
RM-P2580E
CONTROLLER
CAM8
MACHINE ID
TERM : 08 : OFF
CAM2
MACHINE ID
TERM : 02 : OFF
CAM1
MACHINE ID
TERM : 01 : ON
The Hachioji Plant of Victor Company of Japan, Ltd., has received ISO14001 Certification
under the global standard for environmental management.